Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Medford
Gate installation in Medford, MA typically runs $2,800-$9,500 depending on the gate style, operator, and whether we’re working with existing pillars or setting new posts. Most Medford jobs take one to three days once materials arrive. We’ve been hanging gates around the Mystic since 2001, and the thing that sets Medford apart from the suburbs north of the river is the age of what the gate hangs on. Brick pillars. Granite posts. Fieldstone columns that have been through a century of frost cycles. If the masonry isn’t right, the gate won’t be either. Call (877) 610-2993 and we’ll come look at what you’ve got.
Why Gatewood Fence & Gate Is Medford’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001 and his name is still on the shop. That matters when you’re spending five or six thousand dollars on a driveway gate that should last 20 years. We answer our own phone, any hour, and the person who shows up to measure your gate is the same person who’ll be welding it. No call center, no subcontractor roulette.
Medford homeowners call us because the gate they have was hung during the Coolidge administration and the pillar it swings on has moved. We know the housing stock here: triple-deckers off Main Street, late-Victorian two-families in West Medford, brick ranches off Fulton Street. We’ve rehung gates on pillars that were out of plumb by an inch and a half and made them swing like new. That’s not a sales pitch. That’s a Tuesday.
Every installation carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. Seniors and veterans get 10% off, permanently. And nobody pays a trip charge inside the county.
Our Gate Installation Services in Medford
Driveway Gate Installation
A new driveway gate in Medford usually lands between $3,500 and $9,500 installed, depending on whether it’s a single swing, double swing, or slide gate. Many Medford driveways are short and tight, which means a swing gate needs enough setback to clear the sidewalk, or it should be a slide gate on a track. We’ll measure both ways and tell you which one works before you spend a dollar. On streets near Tufts University, where parking is tight and pedestrian traffic is constant, we typically recommend a slide gate with photocells and a loop detector so the gate never closes on a delivery driver or a kid walking home from Medford High.
Pedestrian Gate Installation
Pedestrian gates in Medford run $900-$2,200 for a standard steel or aluminum gate with hardware, more if we’re building a custom gate to match existing ironwork. A lot of Medford homes have the original front walk gate from the 1920s and 1930s, and the iron is still good. The hinges are shot. We can often rebuild the hinge system, reset the striker, and keep the gate you already love. If replacement is cheaper than repair, we’ll tell you that too.
Sliding Gate Installation
Sliding gate installation in Medford runs $4,000-$11,000 because it includes the steel track, cantilever hardware or a rack-and-pinion drive, and a new poured footing. Properties in Wellington near the Mystic River need special attention: the soil is wet, the winter frost goes deep, and a poorly poured footing will heave the track out of alignment by March. We over-excavate and use galvanized post footings there as standard practice. It costs a little more up front and saves a world of trouble later.
Swing Gate Installation
Swing gate installation in Medford is often more about the pillar than the gate. A single swing gate on new steel posts starts around $3,200. A double swing gate with operators runs $6,000-$9,500. But if we’re working with existing brick pillars, the first thing we check is whether the mortar at the hinge anchors is still intact. Around Medford Square and West Medford, it often isn’t. We tuck-point or epoxy-set new anchors before we hang anything. That masonry-first approach is the difference between a gate that works for two years and one that works for twenty.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Medford
We’re certified to service nine major gate brands, and we keep a running stock of parts for the ones Medford calls about most: Viking, Ghost Controls, and DoorKing. If you’ve got an existing operator that’s still in production, we can usually source the board, arm, or sensor within a few days and Gate Installation work doesn’t have to mean ripping everything out. If the operator is obsolete, we’ll show you why, and we’ll quote you a replacement with modern safety features before we touch a wire. No surprises, no upsell.
Common Gate Installation Problems We See in Medford Homes
- Brick pillars that have moved. A century of frost heave pulls the top course of brick out of line. The gate sags not because the hinges are bad, but because the masonry they’re set into has shifted. Fix the pillar first, then the gate.
- Original gate hung without modern entrapment protection. Medford has plenty of gates from before UL 325 existed. No photocells, no safety edges, no reverse sensors. Any new operator installation means bringing the whole system up to code, and that’s non-negotiable with us.
- Rotted wooden sills near the Mystic. In Wellington and along River Street, the bottom rail of a wooden gate sits in wet soil half the year. We replace rotted sills with pressure-treated or composite stock and set the post bases in galvanized footings.
- Legacy slide gates on plain steel track. Older slide gates along Medford’s commercial edges often ride on exposed track with no rack and pinion, no safety edge, and no reversing control. Retrofitting to code sometimes costs more than a new gate and footing. We’ll give you both numbers and let you decide.
Pricing for Gate Installation in Medford, MA
Here’s what Medford homeowners can expect to pay, installed:
- Pedestrian gate: $900-$2,200
- Single swing driveway gate: $3,200-$5,800
- Double swing driveway gate with operators: $6,000-$9,500
- Sliding driveway gate with operator: $4,000-$11,000
- Security gate with access control: $7,000-$14,000
These are real ranges for Medford’s market, not national averages. What moves the price: whether we reuse existing pillars or pour new footings, whether you need an operator and safety devices, and whether the gate is steel, aluminum, or wood. We quote the full price up front and agree on it before any work starts. There’s no version of this where the invoice at the end is bigger than the number we agreed on. Call (877) 610-2993 for a free written estimate. It’s free, it’s specific, and it’s good for 30 days.
We Also Serve Cities Near Medford
Our crews are on the road daily through Somerville, Malden, Everett, and Arlington. If you’re a few blocks over the Medford line, we’re still your local gate company. We coordinate everything from the Boston office and Gate Installation in Medford is the hub for how we price and schedule across the Mystic valley.
Serving Medford, MA - Our Local Coverage Area
We’re based in the Medford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Medford
Yes, but only after the pillar is stabilized. We’ve done exactly this in West Medford, where a 1930s pillar had pulled over an inch out of plumb. We cut out the spalled brick at the hinge anchors, epoxy-set new stainless anchors, tuck-pointed the joints, and then hung the operator. A swing gate operator on a moving pillar will chew through limit switches and burn out the motor. The masonry comes first, always. Call (877) 610-2993 and we’ll assess your pillar in person.
It starts with a site check on the track and footing. River Street properties deal with wet soil and periodic Mystic flooding, so we inspect the footing for heave before we quote anything. If the track and footing are sound, we replace the operator with a modern unit, add rack and pinion if the original was a chain or plain steel track, and install UL 325 safety photocells. If the footing is cracked, replacing the operator alone is throwing good money after bad. We’ll give you the straight read and a written price before any work starts.
We drill out the old anchors, clean the holes, and set new stainless steel anchors in structural epoxy. If the surrounding brick is spalled or the mortar is powder, we tuck-point that section of the pillar first. The gate itself is usually fine, the iron from that era is thick and worth keeping. Then we hang the gate, set the striker, and adjust the swing so both leaves meet in the middle without binding. You don’t need a new gate. You need new anchors and someone who knows how to set them in 100-year-old brick.
Yes, and we do it regularly in Medford where the detached garages and older lots make trenching power expensive. Solar operators work well for single swing gates on a solar panel and battery. For double swing gates and slide gates, the power draw is higher and you may need a larger panel or a hardwired option. We’ll calculate the loads based on your gate size and the sun exposure on your specific lot, which is a real factor in Medford where tree cover varies block by block. Ghost Controls and Viking both make solid solar-compatible operators. Call us and we’ll spec it out for your driveway.
Most of the time, you need new hinge anchors and possibly new posts. The iron on Medford’s older gates is often still dead square, it’s the attachment points that failed. We re-set the hinges, re-hang the gate, and if the post itself is sound, that’s the end of it. If the post is rotted at ground level or the brick is beyond tuck-pointing, we set a new galvanized post in a proper footing. You don’t pay for a new gate if your old one has 30 more years in it.
Got a gate that’s sagging, a pillar that’s leaning, or an operator that’s older than your car? Call (877) 610-2993. Hal will talk you through what you’re dealing with, and if you want him to come look, the trip is free inside the county. The name’s on the shop, and the shop’s not far from you.
Written by the team at Gatewood Fence & Gate. Hal Gatewood founded the company in 2001 and still answers the phone.