Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Maryville
A new driveway gate in Maryville typically runs $2,400 to $7,800 installed, with ornamental iron swing gates on the lower end and automated sliding gates on acreage lots at the top. We install gates in Maryville every week, and we know the difference between a subdivision lot in the 37804 ZIP and a sloped foothills property headed toward Townsend. The soil, the grade, the rainfall, the ice, all of it matters when you’re setting posts that have to hold a 400-pound gate true for 20 years. Hal Gatewood has been at this since 2001, and the name is on the shop. Call (877) 610-2993 for a free measure and a written price.
Why Gatewood Fence & Gate Is Maryville’s Preferred Gate Installation Team
We’re not a franchise. We’re not a phone number that routes to a call center. Gatewood Fence & Gate is Hal Gatewood’s company, locally owned and owner-operated since 2001, with a published address and license number anyone can look up. When a Maryville homeowner calls (877) 610-2993, a live person answers, 24 hours a day. Not a voicemail. Not a chatbot.
Maryville customers consistently tell us the same thing: the person who came out to measure was the same person who showed up to install. That’s because our installation work is done by a small crew that Hal knows by name, not a rotating cast of subcontractors. Background-checked, uniformed, and accountable to a guy whose cell number you’ll have before the job starts.
We’ve built our local reputation in Blount County one gate at a time. In the 37803 and 37804 corridors especially, where newer subdivision homes came with builder-grade gates that never worked quite right, homeowners call us because a neighbor told them we actually fixed the problem instead of talking them into a full replacement they didn’t need. Our Gate Installation team measures every post, every grade, every conduit run before we quote anything.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround. This is also the oldest accountability there is: the name is on the shop, and the shop is down the road.
Our Gate Installation Services in Maryville
Driveway Gate Installation
A driveway gate in Maryville has to handle more than just opening and closing. On the newer subdivision lots in 37803 and 37804, we deal with clay-heavy soil that shifts seasonally, which means post depth and footing size are the difference between a gate that stays square and one that binds within two years. We set posts below frost line, pour footings sized for the gate’s actual weight and swing radius, and we account for the slope so a double gate doesn’t drift open under its own weight. Most driveway gate installs in Maryville run $3,200 to $7,800 depending on gate material, width, and whether you want full automation.
Pedestrian Gate Installation
Pedestrian gates get treated like an afterthought by a lot of installers. We see it in Maryville’s older craftsman homes near the historic downtown, where a wrought iron pedestrian gate matches the house’s character but the hinge post was never set deep enough for Blount County’s wet clay. We hang pedestrian gates on posts set to stay, with hinges sized for the gate’s real weight, and we match the style to the house instead of selling you something off a shelf. Pedestrian gates in Maryville usually run $900 to $2,600 installed, more if automation is added.
Sliding Gate Installation
Sliding gates are common on the semi-rural acreage properties pushing toward the Smoky Mountain foothills, especially in the 37801 ZIP around Big Springs and the rural corridors heading toward Townsend. A steel sliding gate on rollers handles a wide driveway without the swing clearance a double swing gate demands, but the track bed and the operator mounting pad have to be done right the first time. Maryville’s ice-and-thaw cycle wrecks tracks that weren’t set on a properly compacted base. Sliding gate installs here run $4,500 to $9,500 with automation, and we’ll never quote you a number before we see the grade and measure the actual opening.
Swing Gate Installation
Swing gates are the bread and butter of what we do. They’re also where Maryville’s geography punishes shortcuts. On a sloped driveway in the 37803 ZIP, a swing gate hung without accounting for grade will drift open or drag within a season or two. We’re re-hanging gates on pitched driveways all the time, adding shims, re-setting hinges, and correcting what the original installer got wrong. A single swing gate with automation in Maryville typically runs $2,400 to $5,600. A double swing gate runs $4,300 to $9,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maryville
We’re certified to service nine major gate brands, and three of them come up constantly in Maryville: Viking, Ghost Controls, and DoorKing. We stock common parts for these systems locally, which means when your Maryville gate goes down on a Thursday, you’re not waiting a week for a board to ship from a warehouse in California. We install Viking operators on a lot of the ornamental iron gates in Maryville’s newer subdivisions. Ghost Controls and DoorKing show up more on rural and acreage properties. Every install or repair carries the same 90-Day Done Right Promise, and we service what we install.
Common Gate Installation Problems We See in Maryville Homes
- Builders ran 14-gauge wire instead of 10-gauge. We see this constantly in Maryville’s 2000s-era subdivisions. The wire works for a season or two, then voltage drop starts burning out operator boards. By the time we get the call, the homeowner has already replaced the operator once and it’s failing again. The fix is usually a new conduit run with properly sized wire, and we’ve done enough of them in Maryville to know exactly where to look.
- Post footings poured at minimum depth in clay-heavy soil. Blount County’s soil holds water, and when it freezes and thaws, shallow footings shift. Swing gates go out of level, and the operator starts fighting against a gate it can’t move. This is the most common cause of premature operator failure we see in Maryville, and it’s almost always traced back to a footing that was poured to meet a minimum instead of what the gate actually needed.
- Manual gates installed without conduit or junction boxes. This is the Maryville story we hear at least once a month: a house built in 2005 with a manual ornamental iron gate, and now the homeowner wants automation. There’s no power run, no conduit, no box. It’s doable. We did a job in the Heritage Hills subdivision where we ran a new conduit for a loop detector and added safety photocells on both sides before mounting a LiftMaster operator on a gate that originally had no electrical at all.
- Ice damage to operators and panels in foothills winters. Heavy ice accumulation is Maryville’s real winter event, not snow. Ice sheets form over gates, fall from overhanging trees, and the freeze-thaw cycle seizes operators. We see bent aluminum frames, sheared hinges, and operators that worked fine in November and won’t move by January. Gates installed with proper drainage, sealed operators, and covered limit switches handle Maryville winters without drama.
Pricing for Gate Installation in Maryville, TN
Gate installation in Maryville is priced by the gate, the automation, and the site. Here’s what we actually quote in this market:
- Pedestrian gate (no automation): $900 to $2,600
- Single swing gate with automation: $2,400 to $5,600
- Double swing gate with automation: $4,300 to $9,000
- Sliding gate with automation: $4,500 to $9,500
- Driveway gate (any style) with automation and loop detector: $3,200 to $7,800
Three things move these numbers: the gate’s material and width, whether we’re adding automation to a gate that has no existing power run, and the site itself. A sloped driveway, a clay-heavy post bed, or a long conduit run from the house adds real labor. What doesn’t change is the price you’re told. We quote a price in writing before any work starts, and that’s the price. No trip charge inside Blount County. Free measure. Free second opinion on any written estimate you bring us. And your quote comes from Hal, not a sales rep with a quota.
We Also Serve Cities Near Maryville
We install gates in Maryville and the surrounding Blount County communities. If you’re in Alcoa, Eagleton Village, Farragut, or Lenoir City, the same crew and the same pricing apply. We’re familiar with each area’s housing stock and soil conditions, so the gate we recommend for a Farragut subdivision lot may not be what we’d put on a Lenoir City acreage. Same phone: (877) 610-2993.
Serving Maryville, TN - Our Local Coverage Area
We’re based in the Maryville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Maryville
Yes. We do this routinely in Royal Oaks and other older Maryville subdivisions. The typical situation is a decorative iron gate installed during construction with no conduit, no junction box, and no power run. We handle the full retrofit: a short jackhammered trench across the driveway for conduit, a dedicated power run sized correctly for the operator, and a Viking or DoorKing opener matched to the gate’s actual weight. That last part matters. Older ornamental iron gates are often heavier than they look, and an undersized operator will burn itself out in a season. Call (877) 610-2993 and we’ll come measure it and give you a written price.
Only if it’s installed wrong. A swing gate on a sloped Maryville driveway has to have its hinges shimmed and its post set to account for the grade. We’ve re-hung enough gates on pitched foothills driveways to know that a gate installed level on a sloped driveway will drift open under its own weight or drag on the ground within a season or two. We set the hinge post deeper than minimum, shim the hinge barrels so the gate hangs true on the slope, and mount the operator so it’s not fighting gravity. A properly hung gate on a 37803 slope stays where it’s put. We quote the slope corrections in the written estimate, so you’ll see it on paper before we start.
For most rural driveway gates in the 37801 ZIP, yes. A loop detector senses a vehicle sitting at the gate and tells the operator to hold open instead of closing on it. On acreage properties around Big Springs, where driveways are long and drivers aren’t always right up against the gate, a loop detector is the difference between a gate that waits and a gate that closes on your truck. The loop is cut into the driveway and connected to the operator. It’s standard on our automated installs, and we’ll quote it as a line item so you know exactly what you’re paying for. Call (877) 610-2993 for a free measure.
Maryville’s winters are ice-driven, not snow-driven, and the foothills exposure makes it worse. Freeze-thaw cycles put water into post footings, where it expands and contracts, slowly working on the concrete. Ice sheets build up on gates and fall from overhanging trees with real force. For a new system, we handle this at the install: posts go below frost line, footings get proper drainage, operators get sealed properly, and exposed hardware gets corrosion-resistant treatment. We also recommend a spring and fall service check on automated gates in Maryville because the rainfall and humidity here accelerate rust and hinge seizure faster than in drier parts of Tennessee. That’s not salesmanship. That’s just what the climate does.
Under current UL 325 standards, any automatic gate in Maryville has to have at least two forms of entrapment protection. For most residential installs, that’s a set of safety photocells across the gate path plus an operator with built-in obstruction detection that reverses when it meets resistance. We install both as standard on every automated gate, including retrofit jobs. It’s a safety requirement, not an upsell. We also test the reversal function in front of you before we leave, so you can see it working. If a gate is closing on people or cars, that’s a hazard, and we won’t leave a job without it corrected.
Call for a Free Gate Installation Estimate in Maryville
If you’re in the 37801, 37802, 37803, or 37804 ZIP and you need a gate installed, automated, or fixed right, call (877) 610-2993. Hal will answer or call you back fast. You’ll get a free measure, a written price before any work starts, and a gate that’s installed for Maryville’s soil, Maryville’s slopes, and Maryville’s ice. The 90-Day Done Right Promise is stamped on every job in writing. And you can always drive to the shop and look Hal in the eye.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Maryville and Blount County since 2001.