Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Marlton
Gate installation in Marlton typically runs $1,800 to $6,500 depending on whether you’re replacing a simple single swing gate or adding a full automated double driveway gate with operator, safety edges, and concrete work. Most jobs take one to three days once we’ve measured and ordered materials. We don’t rush that timeline, because a gate set in Marlton’s clay has to be done right the first time. Hal Gatewood has been at this since 2001, and he’ll be the one walking your property line before any number goes on paper. Call (877) 610-2993 and you’ll get a live person, not a phone tree.
Why Gatewood Fence & Gate Is Marlton’s Preferred Gate Installation Company
The name on the shop is Hal Gatewood’s, and the shop is down the road, not three states away. That matters when you’re spending real money on a gate that has to hold plumb through Prince George’s County winters. We publish our address. Our license number is something you can look up, not something we hide. We fix what’s broken before we replace what isn’t – that’s the repair-first habit we built the company on, and it carries straight into how we approach new Gate Installation work.
Marlton homeowners call us because they’ve already dealt with a national outfit that quoted one price over the phone and showed up with a different invoice. That doesn’t happen here. The price Hal quotes is the price on the work order, agreed before we dig the first post hole. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Those aren’t promotions. They’re standing offers, and they’ve been standing for years.
Every job, install or repair, carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround, no fine print.
Our Gate Installation Services in Marlton
Driveway Gate
A driveway gate in Marlton does two jobs: it keeps the wrong vehicles out and it tells visitors where the house actually is. The 20623 area has plenty of modest ranchers and split-levels with long, open driveways off Old Marlton Pike and the smaller side roads running east toward Rosaryville. Most of those properties were built mid-to-late 20th century, and the original gates – if they had one – are long past saving. We install new single and double driveway gates sized to the opening, with hinge posts set below frost depth so they don’t lean by spring.
Pedestrian Gate
Pedestrian gates around Marlton take more abuse than driveway gates because people slam them, kids hang on them, and the latch gets forced. We build them simple and strong: treated post, welded steel frame, and a latch that doesn’t require a hip check to close. When we install a pedestrian gate next to a driveway gate, we match the style and hardware so the whole entry reads as one job, not two.
Sliding Gate
Marlton lots vary, but many have driveways that slope or run close to the house. A sliding gate makes sense where a swing gate would clip a car or fight the grade. We pour the track slab level, set the cantilever rollers correctly, and run the operator wiring in conduit. Sliding gates aren’t a bolt-on; they’re a groundworks job, and that’s exactly the part most installs get wrong. We don’t skip it.
Swing Gate
Swing gates are the most common install we do in Marlton, and the most common to fail when the post wasn’t set deep. In this county’s clay, a shallow post heaves. The gate binds at the latch. The hinges scream. A proper swing gate install here means digging below the frost line, pouring a real concrete footing, and bracing the post so it stays put through freeze-thaw. Hal has been welding and setting swing gates since before half the subdivisions in 20623 were built out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marlton
We’re certified to service and install operators from Linear, Ghost Controls, DoorKing, and six other major brands. That means when your Marlton gate operator dies, we don’t tell you it’s obsolete and push a whole new system. We keep common Linear and Ghost Controls parts on the truck, so a lot of operator repairs in Marlton get done the same visit. When a full Gate Installation in Marlton does require new equipment, Hal will recommend the brand that fits your gate’s weight, your driveway’s layout, and your budget – not whichever box is on the truck.
Common Gate Installation Problems We See in Marlton Homes
- Posts heaving out of plumb. Marlton sits on expansive clay that drinks winter moisture and swells, then shrinks in summer. Frost cycles shove shallow-set gate posts sideways. We regularly pull posts that have leaned three or four inches in a single season.
- Missing DPIE permits. Prince George’s County enforces gate and fence permits more actively than most neighboring counties. Homeowners frequently find out at the point of repair that their old gate was never permitted. We know the county’s after-the-fact permit process, so an install doesn’t stall at inspection.
- Rotted wood hinge posts. The 1970s ranchers and split-levels around Marlton often have original chain-link or wood privacy fencing. The gate post, buried in wet clay for decades, rots at ground level. You can’t just patch the panel; the post has to come out and a new footing poured.
- Operator safety failures. When a post shifts, the safety photocells on an automated gate misalign. The operator then fails its entrapment test under UL 325. That’s not a nuisance; it’s a compliance issue. We test reversal and entrapment protection on every automated install we do in Marlton.
Pricing for Gate Installation in Marlton, MD
Here’s what Marlton homeowners should expect to pay. A single manual driveway swing gate, steel frame with wood or aluminum infill, runs $1,800 to $3,200 installed. A double automated driveway gate with operator, safety edges, photocells, and concrete footings typically lands between $3,800 and $6,500. A pedestrian gate alone starts around $600. Sliding gate systems run $2,500 to $5,000 depending on track length and motor. The quote you get is the price you pay – agreed before we start, with no trip charge inside the county. Call (877) 610-2993 for a free written estimate.
We Also Serve Cities Near Marlton
Besides Marlton, our crews cover Rosaryville, Clinton, Camp Springs, and Fort Washington. If you’re just outside 20623, call and ask. We’ll tell you straight whether we service your road, and when we can get there.
Serving Marlton, MD - Our Local Coverage Area
We’re based in the Marlton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Marlton
Yes. Prince George’s County’s Department of Permitting, Inspections, and Enforcement requires permits for gate and fence work, and they enforce it. If your existing gate was installed without a permit years ago, the county allows after-the-fact permitting, but the process is specific. We handle this for Marlton homeowners regularly and will walk you through exactly what DPIE asks for. Call (877) 610-2993 and we’ll tell you what your job needs before any work starts.
Because the post was set in expansive clay, not below the frost line. Marlton’s clay soils absorb winter moisture, freeze, and heave upward unevenly. The gate post tilts, the latch misses, and the hinges bind. The fix isn’t adjusting the hinges; it’s pulling the post, digging below frost depth, pouring a proper concrete footing, and re-hanging the gate. We do this repair in Marlton every spring, and the gate stays put afterward.
For Marlton’s soil, gate posts should be set at least 30 to 36 inches deep, which puts the footing below the typical frost line in Prince George’s County. The county’s clay also needs drainage consideration at the base of the footing, or water pools and the cycle starts again. A shallow 18-to-24-inch set might survive in sandy neighboring counties, but it fails here. We set all Marlton gate posts below frost depth, full stop.
Usually, yes. If your driveway is short, steep, or tight against the house, a sliding gate can be the better answer. The property has to have enough side clearance for the gate to slide open, which some older Marlton lots don’t have. Hal will come out, measure, and tell you honestly which design fits your driveway. If a sliding gate won’t work, he’ll say so and show you why.
Yes. Any automatic gate operator installed in Marlton must comply with UL 325, which means functioning safety photocells or edge sensors and proper reversal testing. When a gate post shifts a few degrees – which our clay does every winter – those sensors misalign and the entrapment protection fails. We test reversal force and sensor response on every automated install and repair we do in Marlton, and we document it. That’s part of the 90-Day Done Right Promise. Call (877) 610-2993 to schedule a free estimate.
Contact Gatewood Fence & Gate for Gate Installation in Marlton
If you need a gate installed, replaced, or finally fixed right in Marlton, call (877) 610-2993. You’ll talk to a live person. Hal will come measure, walk you through what your property needs, and put the price in writing before any work starts. We’ve been owner-operated since 2001, the name is on the shop, and we answer the phone 24 hours a day. No voicemail, no call center, no games.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marlton and the surrounding Prince George’s County communities since 2001.