Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Margate
Gate installation in Margate usually runs $2,400 to $7,800 for a full driveway gate with operator, and a pedestrian gate typically lands between $900 and $2,600. Those are real numbers for this city’s market, not national averages. We quote every Margate job before the first cut is made, and the price we agree on is the price you pay. We’ve been working the neighborhoods off Margate Boulevard, State Road 7, and Atlantic Boulevard long enough to know which existing gates were built to last and which ones were never right from the start. Call (877) 610-2993 and you’ll get a live person, any hour.
Why Gatewood Fence & Gate Is Margate’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That’s not a slogan. When you call about a gate in Margate, you’re talking to the same locally owned, owner-operated company that shows up at your driveway and does the work. We’re not a national chain with a dispatch queue. We’re not a call center three states away. The person who measures your gate is the person who installs it, and if something isn’t right, the same person comes back. That’s the whole point of the 90-Day Done Right Promise, and we put it in writing on every job.
Margate has its own rhythm and its own gate problems. This city developed hard in the 1960s through the 1980s as a destination for retiring adults, which means block after block of 55+ HOA communities with shared entry gates that are now 40 to 50 years old. We know those gates. We know the original operators, the corroded loop detectors, the shifted posts in silty South Florida soil. When a sagging gate won’t close at a Margate HOA off Banks Road, we don’t waste a visit learning the neighborhood. We get there, diagnose it, and fix it. Call (877) 610-2993 and ask for Hal. You’ll get a straight answer.
Our Gate Installation Services in Margate
Sliding Gate Installation
Sliding gates are the workhorse of Margate’s older communities. Where a swing gate needs room to arc open, a slide gate runs parallel to the fence line, which makes it the only practical option for tight shared driveways and entries right off busy roads like Margate Boulevard. We build and install slide gates on track or cantilever, with rack-and-pinion drives from DoorKing, Viking, and LiftMaster. Before we set anything, we look at the soil beneath the track. Margate’s wet, silty ground shifts more than people expect, and a slide gate set on an unstable footing will wear its drive gear out in a few years instead of twenty.
Driveway Gate Installation
A driveway gate in Margate does two jobs: it keeps cars out and it has to keep working in five months of daily afternoon downpours. We install single and double driveway gates, standard and custom, with operators sized to the actual weight of the panel, not a one-size-fits-all guess. For the 55+ communities that dominate this city, we design access so an operator mounted at pedestal height or inside a waterproof enclosure doesn’t drown the first time a heavy storm rolls through in August. We also make sure the pedestrian side access stays usable during the install, because in a Margate HOA, residents need to get in and out without climbing over anything.
Pedestrian Gate Installation
Pedestrian gates in Margate are often attached to the main vehicle gate or set right beside it, and they get beat on daily. We install aluminum and galvanized steel pedestrian gates with self-closing hinges, magnetic locks or drop-rod hardware, and keypad or card entry where an HOA wants it. If the community has older residents, we pay attention to closing speed and pinch points. A pedestrian gate shouldn’t require someone to bench press it, and it shouldn’t slam shut faster than a walker can clear it. Those details matter in this city.
Swing Gate Installation
Single and double swing gates work well on Margate properties with enough apron space for the panel to arc without hitting a car or a wall. We set the hinge posts in concrete sized deep enough to survive Margate’s shifting soil, then hang the panel so the entire leaf moves as one piece, not a frame that torques the post. Swing gates on driveway slopes need extra attention to operator geometry, and plenty of Margate driveways have just enough slope to complicate a simple install. We handle that on site, not in a call center.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We’re certified to service and install nine major gate brands, and in Margate we see the same few over and over: DoorKing, Viking, Ghost Controls, and Elite. Those names are everywhere in this city’s older HOAs. Because we carry common parts for those systems, we can do a full Gate Installation or a retrofit without waiting a week for a motor to ship. For a Margate customer, that’s the difference between a gate fixed this week and a gate swinging free while the parts truck crawls across the state.
Common Gate Installation Problems We See in Margate Homes
- Dead loop detectors in 40-year-old asphalt. The original single-loop vehicle detectors cut into Margate’s older driveway asphalt crack from decades of heat cycles. The wire corrodes, the gate stops sensing exiting vehicles, and a resident who cannot push a 400-pound aluminum slide panel is stuck. That failure pattern drives a disproportionate share of after-hours emergency calls here compared to Coral Springs or Coconut Creek.
- Shifted post footings in wet, silty soil. Margate sits at roughly seven feet of elevation with almost no natural drainage. The ground holds water through the wet season, and concrete footings poured shallow in the 1970s have moved. A gate that sags or a hinge post that has tilted means the fix starts underground, not at the hinge.
- Flooded surface-mounted operator enclosures. The June-to-October afternoon storms dump water fast, and flat terrain means it pools. Surface-mounted control boxes installed decades ago routinely flood. On new installs across Margate, we specify waterproof enclosures or pedestal-elevated control boxes as standard.
- Misaligned drive gear on retrofit slide gates. When a newer operator gets bolted onto an older slide gate that was never built square, the rack and pinion eat each other. We see it constantly in Margate’s shared HOA entries. The fix is square the gate first, then power it.
Pricing for Gate Installation in Margate, FL
Here are honest numbers for Margate’s market. A single driveway gate with a quality operator starts around $2,400 and goes to roughly $5,500. A double driveway gate, which shows up often in Margate’s wider HOA entries, lands between $4,200 and $7,800. A pedestrian gate with hardware runs $900 to $2,600, depending on material and access control. A full Gate Installation in Margate with a waterfall of extras, custom panels, or a large double slide gate can push past $9,000, but that’s real custom work, not a standard install. What moves the number: gate weight, existing post condition, whether we’re replacing loop detectors, and whether the operator needs to be pedestal-elevated or waterproofed. We give you the full price before any work starts. No trip charge inside the county, a free second opinion on any written estimate, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a written quote.
We Also Serve Cities Near Margate
Beyond Margate, our crews work Coconut Creek, Pompano Beach, North Lauderdale, and Coral Springs most weeks. The gate problems in those cities differ from what we see here in Margate, but the fix is the same: show up, diagnose it right, and stand behind the work. If you’re on the edge of Margate and wondering if we cover your street, call (877) 610-2993. If it’s inside Broward County, no trip charge.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Margate
Because the gate itself has already failed, not just the motor. In Margate, the original slide panels installed in the 1970s and 1980s are heavy, often aluminum, and were never designed for modern safety entrapment protection. The posts have shifted in wet soil, the track has settled, and the loop detector buried in cracked asphalt is dead. Bolt a new operator onto that and you’ll be back in a year. A full replacement means a square panel on corrected footings, a new saw-cut loop detector, and a waterproofed operator. In Margate’s HOA stock, that’s the job about 70% of the time. Call (877) 610-2993 for an exact assessment and a written price.
Yes. That’s one of the most common installations we do in Margate. Shared driveways and rights of way off streets like Margate Boulevard or Banks Road rarely have the apron space for a swing gate arc. A slide gate runs parallel to the property line and needs only a clear track line. We measure the driveway throat, check the property pins, and build the gate to fit the actual available space, not a catalog width. Call (877) 610-2993 for a free measure.
We raise them. On new installs in Margate, we standardize on pedestal-elevated or waterproof control enclosures, because flat terrain and daily afternoon storms mean surface boxes flood every season. If an existing operator is still worth keeping, we remount it higher and seal the conduit entries. If it’s not, the replacement goes in elevated from day one. Call (877) 610-2993 and we’ll do a wet-season readiness check on your current setup.
We cut the new loop, wire it to a temporary detector, and keep the gate operational while the saw-cut asphalt cures. In most Margate HOAs, we can complete the detector replacement in one visit, usually the same day, and the gate never sits open overnight. We’ve done this repeatedly in communities off State Road 7 where the original loop was cut in 1978 and has been dead for years. Call (877) 610-2993 for a no-trip-charge assessment.
Yes. Any operator we install in Margate includes entrapment protection: safety photocells, reverse-on-contact, and force settings calibrated for slow-moving pedestrians. In a city with as many older adults as Margate, we set closing speeds slower by default, and we test with a walking person, not just a codebook. The gate has to stop and reverse if it meets resistance. That’s not optional, and we don’t cut the corner. Call (877) 610-2993 to talk through what your gate needs.
On a Shared Entry Gate off Margate Boulevard
On a shared entry gate for a 55+ community off Margate Boulevard, our crew replaced a failing 1980s slide gate operator with a new LiftMaster rack-and-pinion unit after the original loop detector wiring had corroded inside cracked asphalt. We cut out the old loop, installed a fresh saw-cut detector, welded new post footing brackets to stabilize a shifted hinge post, and added a safety photocell, keeping the resident side-access gate working while the main vehicle gate was down. That’s how we handle Margate HOA work. The gate stays functional, the residents stay safe, and the fix lasts.
Margate developed heavily in the 1960s through the 1980s as a destination for retiring adults, and that means an unusually dense concentration of 55+ HOA communities whose shared entry gates and original relay-based operators are now 40 to 50 years old and failing. Unlike newer planned cities just to the west, Margate’s gate market is dominated by full-system overhauls: replacing corroded slide-gate operators, obsolete intercom panels, and crumbling loop-detector wiring, rather than simple parts swaps. That’s why many of the original single-loop detectors still cut into Margate driveway asphalt have failed after decades of Florida heat. Asphalt cracks, loop wire corrodes, and the gate stops sensing exiting vehicles. Because a large share of Margate residents are elderly and cannot manually disengage a heavy aluminum slide panel, these dead-loop failures generate a disproportionate share of after-hours emergency calls compared to surrounding cities.
Call Gatewood Fence & Gate for Gate Installation in Margate
If you need a gate installed, replaced, or made right in Margate, call (877) 610-2993. A live person answers. We’ll schedule a free measure, give you a written price before any work starts, and stand behind the job with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop, the shop is published, and the phone rings at his desk, not a call center. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Margate since 2001.