Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Malden
Gate installation in Malden, MA typically runs $1,400-$6,800 depending on whether you need a pedestrian gate, a driveway swing gate, or a sliding gate built around frost-protected footings. Most Malden jobs take one to three days on site, and we schedule around your driveway so you’re never locked out of your own parking. Call (877) 610-2993 and you’ll talk to a live person who actually knows Malden’s triple-deckers, shared driveways, and 02148 lot lines. Hal Gatewood has been doing this since 2001, and he still answers the phone himself.
Key Takeaways
- Malden frost regularly reaches 36+ inches, so every post gets a footing dug below that depth, never a shallow pour.
- Shared driveways and narrow side yards usually point toward a sliding gate, not a swing gate.
- We’re the Gate Installation crew that welds and fixes what other companies want to rip out and replace.
- Every Malden job includes a free on-site measure and a written price before any work starts.
Why Gatewood Fence & Gate Is Malden’s Preferred Gate Installation Company
We’ve worked on gates all over Malden, from the streets around Malden Center to the neighborhoods up toward Oak Grove. Most of what we see here is the same story: original brick piers from the 1910s, tight side yards, and hardware that was never meant for a two-family rental where six people cycle the gate every hour. Hal’s crew shows up in uniform, background-checked, and we quote the job before we touch anything. The price you agree to is the price on the invoice. No phone-quote lowball, no surprise at the door. You can also drive to the shop and look Hal in the eye, because the name is on the building and the building is down the road. That’s the kind of accountability that matters when you’ve been burned before.
Our 90-Day Done Right Promise is stamped in writing on every Malden job. If something isn’t right, one call brings Hal back. That’s not buried in fine print. It’s the promise on the page. We also give a free second opinion on any written estimate you’ve gotten from another company, and we don’t charge a trip fee inside the county. Seniors and veterans get a permanent 10% discount, no haggling required.
Our Gate Installation Services in Malden
Sliding Gate Installation
Sliding gates are the workhorse of Malden. When a triple-decker’s shared driveway leaves you with nine feet of width and a neighbor’s car parked inches from the property line, a swing gate simply won’t clear. We install rack-and-pinion slide gates with the track recessed into pavement where needed, so the gate doesn’t trip anyone or bounce over a curb lip. If the only spot for overtravel is tight, we engineer the track and end-stop so the gate never rams the post. This is the gate type we recommend most often in 02148.
Swing Gate Installation
A double swing gate works when you have the depth for the arc and a driveway opening wide enough to split the load. But in Malden, the catch is always the same: the hinge post sits in a brick pier that’s been heaving for a hundred years. We don’t just hang a new gate on the old pier and call it done. We core the original brick, pour a fresh 42-inch frost-protected footing, and set a steel post that won’t walk out of plumb by spring. The gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
Side-yard pedestrian gates in Malden take more daily cycles than most suburban driveway gates ever will. Tenant turnover, deliveries, kids going in and out, trash barrels through the side passage. We install pedestrian gates with commercial-duty hinges and latches from the start, sized for the narrow brick walkways behind Maplewood Street three-deckers or the side passages near Ferryway School. If an old ornamental wrought-iron gate still has good bones, our Gate Parts & Welding in Malden team can weld and refit it rather than replace the whole thing.
Driveway Gate Installation
Driveway gates in Malden mean automatic openers, safety photocells, and hardware that can handle dozens of open-close cycles a day without drifting off the limit switches. We stock parts for Linear, Viking, Ghost Controls, and DoorKing, so we’re not waiting on a slow shipment while your driveway sits open. Whether you need a security gate for a multi-unit off Pleasant Street or a simple chain-link driveway gate on the east side, we measure first, quote honestly, and schedule the install without taking your parking out of service while we work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Malden
We’re certified to service nine major gate brands, and in Malden we most often work with Linear and Ghost Controls for slide-gate openers because their limit-switch logic handles high-cycle tenant use better than most residential boards. DoorKing and Viking show up on commercial-leaning installs. We stock local parts for these systems, so a bad board or a stripped rack can be swapped same-visit instead of leaving a shared driveway blocked for days. If you already have a brand picked out, tell us on the call and we’ll tell you straight whether it’ll survive a Malden winter or whether we’d upspec a component here and there.
Common Gate Installation Problems We See in Malden Homes
- Frost heave ruins post plumb. Massachusetts frost penetrates 36+ inches here, and Malden’s original brick piers and hand-poured concrete footings get pushed out of square every winter. A swing gate that dragged on the ground in March probably hung straight in October. We dig footings below the frost line, every time.
- Side yards too tight for overtravel. A slide gate needs about 1.5 times the opening width in overtravel. On a narrow Malden lot, that’s often impossible unless we recess the track into the pavement and tune the end-stop. We do this routinely.
- Shared driveways with no room for a swing arc. Two-family and three-family lots often share one curb cut. A swing gate would hit the neighbor’s car. The answer is a slide gate with a keypad or remote for each unit, and an opener built for commercial-grade cycling.
- Residential hardware failing in months. Hardware rated for a single-family gate gets destroyed on a rental property where the gate opens thirty times a day. We upspec hinges, latches, and operators to commercial-duty so we’re not back in one season.
Pricing for Gate Installation in Malden, MA
What does gate installation cost in Malden? Here are honest, local ranges. A pedestrian gate install starts around $1,400 and tops out near $3,200 depending on whether we’re reusing the existing post or pouring a new footing. A single swing driveway gate runs $2,800-$5,500. A sliding gate for a shared driveway, including the track, opener, safety photocells, and a 42-inch frost-protected footing, runs $3,800-$6,800. The factors that move the price here are footing depth, what’s left of the existing pier, and whether the gate needs automation. Every quote is written, includes all labor and materials, and is agreed before we start. Call (877) 610-2993 and we’ll come out to Malden, measure for free, and put the number on paper.
| Gate Type | Typical Malden Cost |
|---|---|
| Pedestrian gate (new install) | $1,400 - $3,200 |
| Single swing driveway gate | $2,800 - $5,500 |
| Sliding driveway gate with opener | $3,800 - $6,800 |
| Frost-protected footing only | $600 - $1,100 |
We Also Serve Cities Near Malden
We install gates across Gate Installation in Malden and the surrounding communities, including Everett, Melrose, Medford, and Chelsea. If you’re just over the line, call anyway. The no-trip-charge policy covers the county, and we’re in the area every week.
Serving Malden, MA - Our Local Coverage Area
We’re based in the Malden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Malden
Yes, you can, and this is exactly what we install most often in Malden’s two-family and three-family neighborhoods. A slide gate travels parallel to the fence line instead of swinging out, so it never crosses your neighbor’s half of the driveway or arcs over the sidewalk. We recess the track when the curb or pavement profile demands it, and we set the end-stop so the gate parks fully clear of both the property line and the sidewalk. Every unit gets its own entry method, usually a remote and keypad, so access is independent. Call (877) 610-2993 and we’ll measure the shared driveway for free.
Typically we can save the pier by coring out the old post anchor, pouring a new 42-inch frost-protected footing behind or within it, and setting a fresh steel post that won’t heave. Malden’s frost pushes 36-plus inches deep, so if the original footing was shallow, that’s why the gate hangs crooked every spring. We do this Gate Repair in Malden on site, and we don’t tell you to rip out your original brickwork unless the pier itself is crumbling. In that case, the new footing replaces its function entirely. Call us and we’ll tell you which path you’re on after one look.
Yes. Nine feet is wide enough for a pedestrian gate or a narrow slide gate, even with a steep curb. The key is the overtravel pocket: a standard slide gate needs space beyond the opening to open, and when that doesn’t exist, we recess the track into the pavement and use a compact rack-and-pinion setup so the gate opens fully without crossing into the neighbor’s yard or jamming into the house. The steep curb gets addressed with a custom transition, so the gate rolls clean and the track doesn’t become a trip hazard. We’ve done this on side yards all over 02148.
It means we install commercial-duty components from the start, not residential hardware that will fail in one season. Tenants who cycle a gate thirty or more times a day destroy residential hinges, latches, and opener boards quickly. We upspec to high-cycle hinges, commercial latching hardware, and an opener board from Linear, Ghost Controls, or DoorKing, sized for continuous use. We also set up Malden Gate Access Control so each tenant gets a code or remote without letting one tenant’s lost remote compromise the whole property. The gate should work every single cycle, not just the first month after install.
Yes. On Malden properties with one driveway and no street parking to spare, we stage the work so your vehicle access stays open all day. We demount the old gate in phases, prep the footings and track on one side, and schedule the pour and rail work around your coming and going. If the driveway has to be closed briefly, we tell you the exact window in the written estimate before you agree. Most Malden installs never close the driveway longer than a few hours, and those hours are planned in advance. Call (877) 610-2993 and we’ll walk you through the sequence for your exact lot.
Malden-specific note: On a two-family on Boylston Street near Malden Center, our crew pulled a sagging ornamental swing gate whose hinge post had been set directly into an original 1910s brick pier. With a tenant parking spot inches from the property line, there was no room for a swing arc, so we cored the old pier, poured a new 42-inch frost-protected footing, and mounted a rack-and-pinion slide gate with a Ghost Controls opener and safety photocells. The driveway stayed passable throughout the install, and the gate now cycles dozens of times daily without drifting.
Here’s what this page tells you that no other Malden gate page will: Gate installation here is not a generic job. It’s a job defined by frost heave, 100-year-old piers, shared driveways, and high-cycle hardware demands. Since 2001, Hal Gatewood has welded, cored, poured, and rebuilt gates across Malden so they survive the next winter, not just the first inspection. We measure free, we quote before any work starts, and the 90-Day Done Right Promise is in writing. Call (877) 610-2993 and a live person answers, day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Malden since 2001.