Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Maitland
Gate installation in Maitland typically runs $2,400-$9,800 depending on whether we’re hanging a single pedestrian gate on an existing post or engineering a lakefront slide gate with new footings, track, operator, and keypad. Most jobs we quote are started within 5-10 business days, and we send a live person to measure and write the price before any work begins. If your gate sits on a shared driveway or a narrow lake lot, you’re exactly the kind of job we know best. Call (877) 610-2993 and Hal or one of his crew will talk you through it.
Why Gatewood Fence & Gate Is Maitland’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and his name is on every invoice. We’re not a franchise and we don’t subcontract. When you call, a live person answers around the clock. When we show up in Maitland, the person who measured your gate is usually the same person welding it. If something isn’t right, the 90-Day Done Right Promise means one call brings us back. No escalation department, no ticket number.
Maitland customers keep calling us because we actually understand the old lake-cottage plats. Shared driveways, 10-foot rights-of-way, gates that have to clear a neighbor’s turnaround: those are the standard conditions here, not the odd job. We’ve repaired and installed enough gates off Lake Sybelia, Lake Destiny, and the streets that feed Lake Maitland to know what fails and why. That local knowledge saves you money because we don’t guess at the footing depth or the swing arc.
Our Gate Installation Services in Maitland
Driveway Gate Installation
Most Maitland driveway gates we install are either a swing gate on hinges or a slide gate on a track, and the right choice comes down to your lot geometry. On a narrow lakefront parcel, a swing gate often consumes too much of the driveway arc. On a wide 1970s ranch lot, a swing gate is usually the cleanest and cheapest option. We’ll tell you which one actually fits your property, not which one we’d rather sell.
Pedestrian Gate Installation
A pedestrian gate off a side yard or rear fence line keeps kids and dogs in without making you open the big driveway gate every time. In Maitland’s older neighborhoods, these gates often need new posts because the originals were set in 18-inch footings that have since leaned. We pour proper 36-inch footings for any post carrying an operator or daily use.
Sliding Gate Installation
Sliding gates are the workhorse on Maitland’s lakefront streets. When a lot is tight and the driveway runs parallel to the house, a slide gate rides a track instead of swinging into the road or the neighbor’s turn radius. On shared driveways we often specify a cantilevered or rear-mounted operator so the track doesn’t interfere with the neighbor’s access. We also route track above storm drains where the City of Maitland requires drainage clearance.
Swing Gate Installation
Swing gates are common on the 1950s-1970s ranch homes that make up a big share of Maitland’s housing stock. Those gates were often hung from decorative wrought-iron posts set years ago, and when someone retrofits an automated operator, the hinge posts start pulling. We weld on site and reinforce or replace posts so the operator isn’t fighting a foundation that was never engineered for it.
Our full Gate Installation team also handles double gates, security gates, and gate access control, and every install includes a written price agreed before we start.
Double Gate Installation
Double gates are the usual solution when the driveway opening is too wide for a single swing leaf, and Maitland has plenty of those on the lakefront and in the larger estate lots east of I-4. Each leaf needs its own hinge post, and if the opening is uneven or the ground slopes toward the lake, we adjust the bottom gap so the gates don’t bind after the first heavy rain. We also pair double swing gates with a center drop rod or magnetic lock where HOA rules require a lower visual profile.
Security Gate Installation
For a security gate in Maitland we’re usually combining a heavy steel or aluminum frame with an operator, a keypad or access control system, and safety photocells. On shared driveways, the layout matters more than the motor: if the gate arc crosses into the neighbor’s legal turnaround, a slide gate is often the only compliant option. We handle the full installation, including the power run and the safety edges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maitland
We’re certified to install and service nine major gate brands, and around Maitland we work most often with FAAC, DoorKing, and Ghost Controls for slide and swing operators. These are the brands that stand up to lightning-heavy summers and year-round humidity without eating control boards every other month. We stock common repair parts locally so a motor swap or a board replacement doesn’t mean a two-week wait on a part from out of state. For the lakefront gates around Lake Maitland and Lake Sybelia, we favor sealed housings and surge-protected boards because the moisture and storm surge here destroy exposed electronics faster than inland.
Common Gate Installation Problems We See in Maitland Homes
- Shared driveway gates hit by the neighbor’s car. On old Maitland plats, the swing arc often overlaps the neighbor’s legal turning area. A slide gate or a re-hung pivot solves what a new motor never will.
- Slide gate tracks packed with lake debris. Wind-blown algae, pollen, and lake sediment collect in the bottom channel and overload the drive motor. Homes off Lake Maitland get this within the first wet season if the track isn’t cleaned and drained properly.
- Retrofit operators pulling hinge posts out of shallow footings. 1950s ranch gates were built as manual gates. Add an operator and the daily cycling yanks posts set in 18 inches of concrete. We pour 36-inch footings and reinforce the post before hanging the motor.
- Control boards fried by summer lightning. Central Florida’s June-through-September storms send surges that cook gate boards and keypads. We install surge protection on every automation job and recommend it on every existing gate.
Pricing for Gate Installation in Maitland, FL
A single manual pedestrian gate in Maitland typically runs $2,400-$4,200 including posts, hardware, and labor. A driveway slide gate with a new operator, track, and keypad starts around $5,800-$9,800 on most lakefront lots where footings and drainage clearance drive the cost up. A standard automated swing gate on an existing 1970s driveway opening usually lands between $4,200-$7,500. Double gates add $1,800-$3,500 depending on the second leaf and operator sizing. The price you’re quoted is the price you pay. We write it down before any work starts, and the estimate is free. Call (877) 610-2993 and we’ll measure, not guess.
We Also Serve Cities Near Maitland
If you’re in Fern Park, Forest City, Lockhart, or Fairview Shores, you’re within our regular service radius. Whether you’re a few blocks from Lake Sybelia or just over the line toward Lockhart, the same crew and the same 90-Day Done Right Promise apply. See what we do across the area on our Maitland page or call us directly.
Serving Maitland, FL - Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Maitland
Yes, if the gate sits within a dedicated right-of-way or easement, the City of Maitland generally requires a permit and may require the gate to swing or slide a set distance back from the property line. We prepare the drawings and handle the permit paperwork as part of the quote. Call (877) 610-2993 and we’ll check your specific lot and easement before you spend a dollar.
In nearly every case, the track is packed with wind-blown algae, pollen, and lake sediment, which makes the motor work harder and trip its thermal overload. The fix is cleaning the track, checking the drain path, and often adding a sealed motor housing with better ventilation. We see this on Lake Maitland and Lake Sybelia properties within the first 18 months of a new install.
Yes. On a shared driveway off Lake Sybelia, we installed a FAAC slide gate operator with rack-and-pinion drive because a swing gate would have blocked the neighbor’s car turnaround. The existing footings were only 18 inches deep, so we poured new 36-inch concrete footings, routed the track above the storm drain, and added a safety photocell and keypad entry so both owners kept using the driveway the entire time. That’s standard for us, not a special request.
Usually the panel isn’t bent; the hinge post is leaning or the lower hinge has worn out of round. On the older ranch homes around Maitland, the posts were set shallow and the hinges were never built for an automated operator. We can weld a reinforcement plate and reset the post in place. If the panel is actually rusted through at the bottom rail, we’ll tell you straight and weld a new section rather than pushing a replacement you don’t need.
Yes. Lakefront lots in Maitland hold elevated humidity all year, and the near-daily summer storms deliver more lightning surges than inland neighborhoods. We specify sealed or better-vented operators with surge-protected control boards, and we use corrosion-resistant track hardware. A basic inland operator will work for a while and then fail early. Call (877) 610-2993 for a quote that accounts for actual lakefront conditions.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Maitland since 2001.
Ready to stop wondering who will show up? Call (877) 610-2993 for a free estimate on gate installation in Maitland. Hal answers the phone, and if he doesn’t, a live person on his crew does. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.