Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lutherville-Timonium
Gate installation in Lutherville-Timonium typically runs $2,400 to $9,500 depending on gate style, material, and whether we’re adding automation. Most single swing gate installs land between $2,800 and $4,500, while automated double driveway gates start around $5,500 and climb from there. If your existing gate is fighting you every spring thaw or the operator is old enough to have grandkids, our Gate Repair in Lutherville-Timonium team can help - call (877) 610-2993 and we’ll give you a straight answer, not a sales pitch.
We work the 21094 ZIP constantly, and we know these neighborhoods. The older streets off York Road, the split-levels and ranchers up toward Timonium, the long driveway colonial lots near I-83. When you call Gatewood Fence & Gate, you’re not getting a middleman and you’re not getting a national outfit. You’re getting Hal Gatewood and a crew that has welded, hung, and rescued gates in Lutherville-Timonium more times than we can count.
Why Gatewood Fence & Gate Is Lutherville-Timonium’s Preferred Gate Installation Company
Hal Gatewood has been owner-operating this business since 2001. Not a franchise. Not a rotating cast of subcontractors. The same name is on the shop, the invoice, and the work. Lutherville-Timonium homeowners tend to like that, because they already got burned once by a company that quoted one thing on the phone and charged another at the door. Our estimate is the price. It’s quoted and agreed before any work starts, in writing.
We answer the phone with a live person 24 hours a day, 7 days a week. Not a voicemail, not an automated attendant, not a call center three states away. When you call about a gate that won’t close on a Sunday night in the 21094, a real person picks up. That matters more than most people realize until they need it.
Lutherville-Timonium customers also get something you won’t find on a big-box invoice: the 90-Day Done Right Promise. It’s stamped on every job. If something isn’t right, one call brings us back. No runaround, no fine print, no “that’s not covered.” Hal’s name is on it, and he doesn’t hide from his own work.
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. That means when you have a 40-year-old BFT operator or a newer FAAC swing arm, we don’t scratch our heads. We know the board, the wiring, and the failure modes on these specific units.
Our Gate Installation Services in Lutherville-Timonium
We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates all over Lutherville-Timonium. Most of what we do falls into two camps: replacing a gate that’s finally done, or retrofitting an older one so it stops failing every season. Here’s what each looks like around here.
Driveway Gate Installation
A new driveway gate in Lutherville-Timonium usually means a steel or ornamental aluminum frame on properly set concrete footings, with hinges sized for the panel weight. We don’t reuse shallow 1960s footings for a new gate. We dig below Baltimore County frost depth, set the posts in concrete, and let it cure before anything gets mounted. A single driveway swing gate install typically runs $2,800 to $4,500 complete, including posts, hardware, and manual operation. If you want automation, that’s additional, and we’ll spec the operator to the gate weight, not the other way around.
Pedestrian Gate Installation
Pedestrian gates on these half-acre-plus Lutherville-Timonium lots often sit alongside the driveway or off a side yard. We build and install them with self-closing hinges where Baltimore County code requires it, and we match the style to your existing fence or driveway gate. A basic ornamental steel pedestrian gate runs $900 to $2,200 depending on width and whether we’re setting new posts or working with solid existing ones. These are the most straightforward installs we do, and they usually take a single day.
Sliding Gate Installation
Sliding gates make sense on Lutherville-Timonium properties where the driveway is short or slopes toward the house and a swing gate would hit the grade. We install cantilever and track-style slide gates, mostly cantilever for 21094 homes because tracks clog with leaves, ice, and road grit here. A manual sliding gate starts around $4,000 and an automated slide gate runs $7,000 to $9,500 with a FAAC, BFT, or Viking operator. We always spec the safety photocells and edge sensors on automated slide gates, no exceptions, because a slide gate that meets a car or a kid is a serious liability.
Swing Gate Installation
This is the bread and butter of Luterville-Timonium’s older neighborhoods. Original ornamental iron double swing gates from the 1960s and 70s were hung on shallow footings, and they heave every spring. When a homeowner calls us for a new swing gate installation, we almost always end up resetting or replacing the hinge posts, not just hanging a new panel. A new single swing gate with posts runs $2,400 to $4,000. A double swing gate starts at $4,800 and goes up with automation. If the posts are solid, we’ll save you money by reusing them. If they’ve heaved, we’ll show you why before we touch anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lutherville-Timonium
Gatewood Fence & Gate is certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Lutherville-Timonium, we see a lot of BFT and FAAC operators on the older ornamental iron gates, and Linear or Viking on the newer slide installs. We keep common control boards, remotes, photocells, and Gate Parts & Welding in Lutherville-Timonium supplies on the truck so we’re not driving back and forth across Towson for parts. If your operator is a brand we don’t recognize, we’ll tell you that too, straight up.
Common Gate Installation Problems We See in Lutherville-Timonium Homes
Not every old gate needs a burial. But a lot of what we see in the 21094 has the same root causes. These are the patterns, not the exceptions:
- Frost heave on shallow footings: The original 1950s-80s gate posts around York Road and I-83 were often set shallower than Baltimore County’s frost depth. Every freeze-thaw cycle lifts the uphill post a little more than the downhill post, and by spring the gate drags on the apron and shears the bottom hinge.
- Obsolete operator boards: A 1970s gate operator doesn’t have modern UL 325 entrapment protection. When the board dies, it’s not worth patching. Replacement with a properly rated operator is the cheaper answer in the long run, and it’s the safe one.
- Rust from I-83 salt spray: Properties close to the I-83 corridor get road salt mist airborne in winter. It settles on ornamental iron gates and accelerates rust on the hinge side, where the paint wears first. We regularly weld cracked hinge mounts and replace corroded posts on gates that look fine from the street.
- Worn hinges on heavy iron doubles: A double swing gate hangs entirely on its hinge pins. Forty years of opening and closing, plus salt corrosion, wears those pins into ovals. The gate starts to droop, then the leaves stop meeting in the middle. That’s a hinge and post problem, not a panel problem, and it’s exactly the kind of thing we fix rather than replace.
Pricing for Gate Installation in Lutherville-Timonium, MD
Here’s what honest money looks like in this market. A single ornamental steel swing gate installed on new posts runs $2,400 to $4,000. A double driveway swing gate runs $4,800 to $7,500 manual, and $6,000 to $9,500 with automation and safety photocells. Sliding gates start around $4,000 manual and $7,000 to $9,500 automated. Pedestrian gates run $900 to $2,200.
What moves the price is the post work. If we’re digging new footings below frost depth, that’s labor and concrete and cure time. If your existing posts are solid and plumb, the install is faster and cheaper. We quote the price before any work starts, and that’s the price you pay. No trip charge inside the county. $40 off any repair over $200. A free second opinion on any written estimate. And a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on Gate Installation.
We Also Serve Cities Near Lutherville-Timonium
We work throughout Lutherville-Timonium and the towns around it. If you’re in Timonium, Hampton, Towson, or Mays Chapel, the same crew and the same 90-Day Done Right Promise apply. We know the housing stock up and down York Road, and we don’t treat a Hampton colonial any different than a Timonium rancher: the gate gets fixed right or it gets replaced honestly. See more about our local coverage on the Gate Installation in Lutherville-Timonium page.
Serving Lutherville-Timonium, MD - Our Local Coverage Area
We’re based in the Lutherville-Timonium area and offer Lutherville-Timonium Gate Access Control services because we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lutherville-Timonium
Because the original post footings from the 1950s-80s era were set shallower than Baltimore County’s frost depth, and the uphill post heaves more than the downhill post every freeze-thaw cycle. The gate then rides low on the hinge side, drags the driveway apron, and eventually shears the bottom hinge or burns out the operator. The fix is to reset the posts below frost depth and re-hang the gate. We do this routinely on York Road-adjacent properties in the 21094, and it’s exactly the kind of repair our Gate Installation team handles. Call (877) 610-2993 and we’ll come look at your footings.
Generally speaking, no. A 1970s slide gate operator lacks modern UL 325 entrapment protection, and you can’t bolt photocells and edges onto an obsolete board and call it safe. When those boards fail, replacement with a new operator is the honest answer. We install FAAC, BFT, Linear, and Viking automated slide operators with current safety sensors, and we quote that replacement as a fixed price before any work starts.
Road salt spray drifts off I-83 in winter and settles on iron and steel gates, especially on the hinge side where paint wears thin from movement. That accelerates rust, and we regularly find hinge posts corroded from the inside out on properties within a few hundred yards of the highway. We weld cracked hinge mounts, replace corroded posts, and repaint with a rust-inhibiting primer so the repair lasts. If you’re close to I-83, have your gate hinges and post bases checked before winter, not after.
It depends on the post, not the panel. If the hinge post is still plumb and the metal around the hinge is sound, new hinges and a weld repair get that gate back to square for a few hundred bucks. If the post has heaved or corroded, patching the panel is wasted money because you’ll fix it twice. We’ll tell you which situation you have, show you what we’re seeing, and quote both options. A new single swing gate install in Lutherville-Timonium runs $2,400 to $4,000, and sometimes that’s the cheaper answer over three years.
Any automated gate installed in the 21094 needs UL 325 compliant operators with primary entrapment protection, which means photocells or contact edges that stop and reverse the gate if something is in the way. Secondary protection like a reversing edge is required in many configurations, especially on slide gates. We install all new gate automation with the required safety devices on every single job. We don’t sell automation without sensors, no matter how simple the gate. Call (877) 610-2993 for an exact quote, estimates are free.
Call Gatewood Fence & Gate for Honest Gate Installation in Lutherville-Timonium
If your gate is dragging, sagging, stubborn, or just done, call (877) 610-2993. You’ll get a live person, a straight answer, and a written estimate quoted before any work starts. Hal Gatewood has been doing this since 2001, and his name is on the shop. No dispatch queue. No runaround. Just a gate guy who will tell you the truth about your posts, your operator, and what a new installation should cost in Lutherville-Timonium.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lutherville-Timonium and the surrounding Baltimore County communities since 2001.