Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Long Beach
Gate installation in Long Beach runs between $1,800 and $7,500 for most residential jobs, and we quote every price in writing before any work starts. That range covers a simple pedestrian gate replacement in California Heights up to a full double driveway gate with automation on Naples Island. We’ve been installing and repairing gates across Long Beach since 2001, and we know exactly what the salt air off the harbor does to steel, aluminum, and control boards. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Long Beach’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and he’s been standing behind gate work in Long Beach for over two decades. When you call, you get a person who knows the difference between a gate that sags because the hinge post rotted in Bluff Park salt air and one that was just hung wrong in the first place. We don’t run a dispatch queue, and we don’t route calls through a center three states away. You call, we answer.
Long Beach homeowners keep our number because we weld on site instead of hauling gates back to a shop. That matters when a 1930s wrought-iron pedestrian gate in Bixby Knolls needs a hinge reset same day, not next week. Every job we do in Long Beach carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround, no fine print.
Our Gate Installation Services in Long Beach
Driveway Gate Installation
Driveway gates in Long Beach range from simple single swing gates on 1940s bungalows in California Heights to wide double gates guarding newer homes near Eldorado Park. We install both, and we build the frame to handle the constant onshore wind and salt that eats unprotected steel. For homes in ZIP codes 90822 and 90832, we recommend marine-grade powder-coated aluminum or galvanized steel as the baseline, not an add-on.
Pedestrian Gate Installation
Pedestrian gates in Long Beach take the worst of the salt air because they sit low and catch every breeze off the harbor. The original wrought-iron gates on 1920s and 1930s homes in Bluff Park and Bixby Knolls have often been up for 80 years with nothing but paint holding them together. We replace those with properly welded frames and hinges that won’t seize in two years. If the existing gate can be saved, we say so, and we fix it in place rather than swapping it for something cheap.
Sliding Gate Installation
Sliding gates are common at apartment complexes and commercial lots throughout Long Beach, particularly in the 1960s-1980s multifamily corridors of 90805 and 90810. These gates cycle dozens of times a day, and the operators that drive them fail faster here than the manufacturers’ maintenance schedules account for. We install cantilever and V-track sliding gates with operators sized for heavy daily use, and we always set the safety photocells and edges to current code before we leave.
Swing Gate Installation
Swing gates in Long Beach neighborhoods like Naples Island work against a microclimate that hangs humidity in the air year-round. Brackish water on three sides of many lots means standard steel hinges and latches on swing gates routinely fail within two to three years. We set swing gates with marine-grade stainless or powder-coated hardware from the start, and we reset hinge posts to full concrete depth so the gate doesn’t sag into the latch in the first year. Our full Gate Installation team handles everything from a single pedestrian gate to a matched double gate set.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Long Beach
We service and install operators from FAAC, BFT, and Linear, among others, because those are the brands Long Beach homes and complexes actually have on the ground. When a legacy FAAC board corrodes out on a Naples Island driveway gate, we stock the replacement parts locally and don’t make you wait on a freight delivery. BFT operators hold up better in marine air than most, and we often recommend them for exposed coastal lots. Linear swing and slide operators are common in Long Beach apartment complexes, and we carry the control boards and photocells to keep them running.
Common Gate Installation Problems We See in Long Beach Homes
- Salt-air control board failure. Older LiftMaster and DoorKing boards in Long Beach corrode at the connectors and traces, leaving the gate stuck open or closed. The humidity off the harbor carries chlorides that inland boards never face, and boards that would last 12 years in Lakewood often die in six or seven here.
- Rusted hinge posts on 1920s-1940s ornamental iron gates. The gate looks fine, but the post rotted underground. You can’t sag-correct a gate when the post itself is gone. In California Heights and Bluff Park, we regularly reset posts to proper concrete depth and install new hinge blocks rather than trying to patch what salt has already eaten.
- Pre-UL 325 gates with no entrapment protection. Gates hung before modern safety requirements often lack photo-eyes or edge sensors entirely. Some older panels cannot be retrofit for that equipment, which means replacement is the honest answer, not a patch job that leaves a gap in protection.
- Heavy daily cycling on 1960s-1980s apartment gates. A sliding gate at a North Long Beach complex cycles hundreds of times a week. The hardware wears, the rollers flatten, and the operator’s duty cycle gets exceeded. We size replacements for the actual cycle count, not the builder’s original spec.
Pricing for Gate Installation in Long Beach, CA
A pedestrian gate replacement in Long Beach typically runs $1,800 to $3,200 depending on size and post condition. A single swing driveway gate with a new operator runs $3,500 to $5,800. Double driveway gates, common on larger lots in the 90833 and 90822 areas, run $5,000 to $7,500 installed with automation. Sliding gates for apartment complexes run higher because they require track, cantilever hardware, and heavier operators. The biggest variable in Long Beach is existing post condition. If salt has eaten the post, we reset it in new concrete which adds labor but prevents the job from failing in two years. Every price we give is quoted in writing and agreed before any work starts. Call (877) 610-2993 for a free estimate at your Long Beach property.
We Also Serve Cities Near Long Beach
If your property sits just outside Long Beach, we serve the surrounding area including Signal Hill, Lakewood, Carson, and Compton. For full details on our local service, see Gate Installation in Long Beach. If you’re anywhere in the county, there’s no trip charge to come look at your gate.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Long Beach
Naples Island gates sit near brackish canal water on multiple sides, which keeps humidity high and pushes salt aerosols directly onto metal hardware. Standard steel hinges and latches there fail within two to three years instead of the ten-plus a manufacturer might assume. We install marine-grade stainless or powder-coated aluminum hardware on Naples Island as the baseline because anything less is a guaranteed callback. Call (877) 610-2993 and we’ll walk your gate and tell you what’s actually failing.
Sometimes yes, sometimes no. If the gate panel and posts are structurally sound, we can add photo-eyes, edge sensors, and a current-code operator without replacing the whole gate. If the panel is rusted through at the hinge points or the control board is gone, replacement is the honest answer because patching a failing panel with safety equipment won’t hold. We’ll tell you which one your gate needs when we see it.
In Long Beach, every six months is realistic, versus once a year for inland cities like Compton or Lakewood. The marine layer and harbor particulate get into control boxes, corrode contacts, and seize moving parts faster here. Six-month service catches board corrosion and hinge wear before the gate stops working at 11 p.m. on a Saturday. Call (877) 610-2993 to set a service schedule on your Long Beach gate.
For Bluff Park’s Spanish Colonial Revival homes, powder-coated aluminum gives the closest look to original wrought iron without the rust problem that plagues steel in coastal Long Beach air. Aluminum doesn’t oxidize the way iron does, and the powder coat holds its color through years of marine humidity. If you want real wrought iron for authenticity, we can fabricate it, but we’ll recommend stainless hinges and marine-grade fasteners either way.
Yes, if the gate is automated and vehicles drive through it, a loop detector is standard on sliding gates in Long Beach complexes. It tells the operator when a car is present so the gate doesn’t close on it. In older 1960s and 1970s complexes in 90805, we often find the original loop wire has corroded or the detector board has failed, and we replace both as part of a full sliding gate installation. Call (877) 610-2993 and we’ll check your existing loop before quoting.
If your gate in Long Beach is old, rusted, sagging, or stuck, call (877) 610-2993. We’ll come look at it, give you a written price before any work starts, and do the job so it stays done. Hal Gatewood has been at this since 2001, and if it’s not right, the 90-Day Done Right Promise means we come back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Long Beach since 2001.