Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Littleton
Gate installation in Littleton usually runs $2,800-$7,500 for a standard driveway gate, and $4,500-$12,000 when you add an automatic opener or a wide double gate across an acreage entrance. We’ve been welding, hanging, and automating gates in Littleton’s ZIP codes since 2001, and we know what this soil does to a post footing better than anyone passing through on I-25. Hal Gatewood answers the phone himself, and the person you talk to is the person who shows up with the welder. Call (877) 610-2993 and we’ll come measure your entrance, walk the HOA spec sheet with you if you’re in Highlands Ranch or Ken Caryl Ranch, and put the price in writing before any steel hits the ground.
Why Gatewood Fence & Gate Is Littleton’s Preferred Gate Installation Company
Hal Gatewood has had his name on the shop since 2001. That’s not a marketing line. It means when a gate he hung in 2009 starts sagging off a heaving post on West Bowles Avenue, the same guy who installed it is the one who comes back to fix it. We drive into Littleton every week across 80120, 80121, 80122, and the unincorporated spreads around 80166. We know that Ken Caryl Ranch’s architectural review committee won’t approve a composite gate board if the community’s approved fence spec calls for cedar. We know that mid-century ranch homes in older Littleton proper still have corroded wrought-iron hinges nobody fabricates anymore, and we weld replacements on site rather than telling you to order a part that hasn’t been made since 1987.
Every job carries the 90-Day Done Right Promise in writing. If the gate doesn’t swing true or the operator misses a limit, one call brings Hal back. No runaround. No “you must have bumped it.” Just a guy who reads his own invoices.
We’re licensed and insured, we answer the phone with a live person 24/7, and we don’t send a call center or a faceless crew from three counties away. The address is published. You can drive to the shop and look Hal in the eye if you want to. And when you call (877) 610-2993 for an estimate in Littleton, you get a number before we start, not after.
Our Gate Installation Services in Littleton
Driveway Gate Installation
A driveway gate in Littleton has to handle more than just opening and closing. The freeze-thaw cycles at 5,300 feet push clay soil up against post footings every winter, and a gate that starts plumb can lean half an inch by spring. We set posts deeper than code minimums, backfill with compacted structural fill that stabilizes in bentonite-rich clay, and build frames strong enough that a minor heave doesn’t twist the hinge line. Whether you’re on a quarter-acre lot off South Santa Fe Drive or a five-acre spread west of Wadsworth, we install the gate to match your fence line and the community spec.
Pedestrian Gate Installation
Pedestrian gates in Littleton take a beating because they get used ten times more than the driveway gate. We build them with the same heavyweight hinges and welded corners as a vehicle gate, because a lightweight kit from a box store lasts about three winters before the latch ears tear off. If you’re in a Highlands Ranch courtyard home with an HOA that regulates gate style, we’ll pull the approved fence spec sheet before we quote, so you don’t pay for a redo when the architectural committee rejects a material they never approved.
Sliding Gate Installation
Sliding gates make sense on Littleton acreages where a swing gate would need 14 feet of clear radius and a snow berm would block it half the year. We install cantilever and track-style sliding gates for driveways that run long and straight off Titan Road or through horse properties in the southern ZIP codes. The track has to survive bentonite heave, so we pour a continuous concrete bearing and set the rollers on adjustable plates. When the ground moves, we adjust the gate instead of replacing the whole run.
Swing Gate Installation
Swing gates are the most common gate in Littleton’s 1980s-2000s suburban tracts, and the most common failure is the hinge post, not the gate panel. A gate sags in the hinge post, not in the middle, and that’s where we start. We install heavy-duty swing operators from Viking and DoorKing with articulating arms, battery backup, and safeties wired to meet UL 325. On a double gate across a pasture entrance, we coordinate the sequencing so the leaf that opens first closes last, and we add a lag pin or ground track if livestock will crowd the line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Littleton
We’re certified to install and service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. For Littleton customers, that means we stock common boards, arms, and safeties in the truck when we head down from the Denver metro office, because nobody wants to wait a week for a Viking control board to ship while their gate stays open all night. If you bought a Ghost Controls kit and the photocells are throwing false faults, we can walk the wiring and replace what’s actually bad, not sell you a whole new opener. Hal’s been inside these systems since 2001, and the brands haven’t changed his opinion: fix the failing part, replace what’s dead, and leave the rest alone.
Common Gate Installation Problems We See in Littleton Homes
- Bentonite heave on post footings. Littleton sits on expansive clay that swells and shrinks with every Chinook-driven freeze-thaw swing. A post set too shallow will lean a quarter-inch per year until the gate won’t latch anymore.
- HOA rejections on materials. Highlands Ranch and Ken Caryl Ranch architectural review committees require pre-approval for any material change from the community’s approved fence spec. Installing a composite board where the spec calls for cedar is a full redo at your cost.
- UV-degraded wood and vinyl hardware. At 5,300-5,600 feet, Littleton’s UV load cracks gate boards and turns vinyl post caps into brittle plastic in three to five years. We spec UV-stable materials or steel where it makes sense.
- Corroded original hardware on mid-century homes. Older Littleton proper (80120, 80121) still has original wrought-iron or chain-link gate hardware that’s corroded and out of production. We fabricate and weld replacements instead of scrounging salvage yards.
Pricing for Gate Installation in Littleton, CO
A standard single driveway swing gate in Littleton runs $2,800-$4,500 installed. A double swing gate across a wide driveway or pasture entrance typically runs $4,500-$8,000. Adding an automatic operator with safeties and battery backup pushes the total to $6,500-$12,000 depending on the operator brand, the post size, and whether we need to trench for power or convert to solar with a Viking or Ghost Controls panel. Sliding gates run $3,500-$9,000 for the gate and track work, not including the operator. Every quote is written and agreed before work starts, so the price on the paper is the price you pay. Hal’s standing policy: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Littleton
While this page focuses on Gate Installation in Littleton, our crews regularly run down from the metro office to Gate Installation jobs in Columbine, Highlands Ranch, Southglenn, and Greenwood Village. If you’re on the edge of 80120 or across the county line, call (877) 610-2993 and we’ll tell you straight whether it’s in our service area and when we can get there.
Serving Littleton, CO - Our Local Coverage Area
We’re based in the Littleton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Littleton
Yes. Both Highlands Ranch and Ken Caryl Ranch operate architectural review committees that require pre-approval for any material change from the community’s approved fence spec. We pull the fence spec sheet before we quote so the gate we build matches what the committee already approved. Call (877) 610-2993 and we’ll tell you what your community requires before you spend a dollar.
The post heaves because Littleton’s bentonite-rich clay swells with moisture and shrinks in the dry Chinook winds, moving the footing a little every season. A reset that doesn’t address the soil under the post will heave again within a few years. We set posts deeper than local code and backfill with stabilized material so the footing moves less. Call (877) 610-2993 and we’ll dig up what’s actually happening under your hinge post.
Yes. On long driveways off West Titan Road where trenching mains power runs 300 feet through bentonite clay, we install solar-powered operators from Viking or Ghost Controls with battery banks sized for Littleton’s winter sun angles. On a recent job near 80125 we set a 14-foot swing gate with a solar Viking operator, embedded loop detectors, and photocells, then coordinated with the owner to keep the pasture gate clear while livestock moved. Call (877) 610-2993 and we’ll spec the panel and battery size for your exact sun exposure.
For heavy double swing gates across dirt driveways, we install Viking and DoorKing operators with articulating arms rated for wide, heavy leaves, plus battery backup and properly sequenced closing. We’re certified on both brands and stock parts for them. Call (877) 610-2993 and we’ll measure the actual leaf weight and pick the operator that moves it without burning out.
Automatic gates in Littleton must meet UL 325 safety standards, which means photocells at the gate opening, edge sensors where a gate could contact a person or car, and proper force settings on the operator. We wire every automatic gate with primary and secondary entrapment protection and test it with the gate under load. Call (877) 610-2993 and we’ll verify your current gate or install one that’s compliant from day one.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Littleton and the Front Range since 2001.