Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Las Vegas
Gate installation in Las Vegas runs $2,400 to $9,800 for a typical automated driveway gate, depending on whether you’re automating an existing manual gate or starting from scratch with new posts, gate, operator, and the conduit runs that should have gone in during the build but usually didn’t. Most installations in Las Vegas take one to three days once materials are on site, and we quote the price before any work starts, in writing, so the number doesn’t move on you at the door. We know the gates, the operators, the HOA boards, the thermal expansion, and the hard water out here because we’ve been working these streets since before a lot of the Summerlin-side communities even had gates on their punch lists.
Call (877) 610-2993 and you’ll get Hal or someone who works shoulder to shoulder with him, not a recording. We’ll schedule a free measure, put the price in writing, and show you exactly what the job will look like before we start digging.
Key Takeaways:
- Free measure and written estimate, with the price agreed before work starts.
- Installation typically takes one to three days once materials are on site.
- We run the conduit, loop detectors, and safety photocells that should have gone in at the build.
- Live person answers the phone 24/7, and Hal answers for the job with the 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Las Vegas’s Preferred Gate Installation Company
Hal Gatewood put his name on the shop and his address on the invoice, and he’s been installing and repairing gates here since 2001. When you call Gatewood Fence & Gate for a gate installation in Las Vegas, the person who answers is the person who stands behind the work. No call center, no dispatched crew from three states away, no estimate that changes at the door. Hal and his crew show up in the window they promised, and if it’s not done right, the 90-Day Done Right Promise brings them back. It’s written on the invoice, not buried in fine print.
Las Vegas homeowners call us because we know the difference between a gate that’s actually failing and a gate that’s just bearing the marks of Las Vegas: heat, hard water, dust. We’ve corrected plenty of installs where the gate itself was square and the original operator was undersized. That’s the kind of thing that only becomes obvious when you’ve seen a few hundred of them. We also keep a real inventory of parts for common Las Vegas gate brands, which means when a board fails on a LiftMaster or an FAAC, we aren’t waiting on a parts drop to keep the job moving.
Local reviews tell the same story: show up on time, do the work in the driveway, charge what you quoted, and stand behind it. That’s the whole business model.
Our Gate Installation Services in Las Vegas
We install every common type of Gate Installation across the Las Vegas metro, from single-family driveway gates in older neighborhoods to HOA slide gates and pedestrian access points. Every job starts with a look at the existing post footings, the operator sizing, and the conduit that exists or doesn’t. From there, here’s what we handle:
Driveway Gate
Driveway gate installation is the work we do most in Las Vegas. If you’re in a 1950s-1970s ranch home around the 89101 to 89110 corridor where the original gate was set with shallow post footings, we don’t hang an operator on that and hope. We reset the footing, square the hinges, and then automate. A gate sags in the hinge post, not in the middle, and that is where we start. Most driveway gate installs in Las Vegas run $3,200 to $8,500, including the operator, safety edges, and the wiring and conduit runs to get it to code. We quote it before we start.
Slide Gate
Slide gates are the standard for Las Vegas HOA entrances and wide driveways, and they carry their own discipline. The original installs from the 1990s and 2000s boom often included operator wiring stub-ended at the pad, but no spare conduit for loop detectors, keypads, or safety photocells. When we install or re-install a slide gate in Las Vegas, we address that: we’ll trench and run what’s needed so the gate meets current UL 325 requirements, not what happened to pass inspection twenty years ago. If your slide gate has started binding every afternoon, the steel has likely expanded with the heat and is riding up on the rack. We fix the rack mesh and the pinion, then re-commission the operator.
Swing Gate
Swing gates on a double driveway need a correctly sized operator and correctly placed hinges, and Las Vegas heat punishes both. A builder-grade operator sized to the edge of its duty cycle will burn out in two or three summers on a double swing gate that spans a wide driveway, even if the gate itself is still square. We size the operator to the real gate, the real leaf weight, and the real Las Vegas summer. If you’re automating an existing manual swing gate, we check the post first. The old ranch-home footings were never dug to handle an operator’s torque.
Pedestrian Gate
Pedestrian gate installation covers everything from a matching wrought-iron walk gate alongside a new driveway gate to a keypad-controlled pedestrian access point at an HOA pool or clubhouse entrance. In Las Vegas, pedestrian gates take the brunt of hard-water scale and UV damage because they’re opened by hand, dozens of times a day, and the pivot points are close to sprinkler lines and irrigation overspray. We use sealed bearings and properly set posts, and we harden the wiring for the Mojave sun. These jobs usually run $1,200 to $3,400 depending on size, material, and access control.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Las Vegas
We are certified to service and install nine major gate brands, including FAAC, BFT, and Linear operators, which covers most of what’s installed across Las Vegas HOA entrances and residential driveways. We stock common parts for these brands locally, which keeps turnarounds short when a board fails or an arm snaps. Viking operators show up a lot around Las Vegas as well, especially on the 1980s and 1990s HOA stock. And when a builder-grade operator fails early, we often replace it with a properly sized unit from a brand we trust and stand behind, fully covered by the 90-Day Done Right Promise.
If a customer has a written estimate from another Las Vegas company, bring it to us and we’ll give you a free second opinion. Hal will tell you straight whether the work is needed at all, and that habit has earned us long-standing relationships across the valley.
Common Gate Installation Problems We See in Las Vegas Homes
Some of these are Las Vegas-specific. Some show up everywhere, but the heat and water make them worse here. Either way, we see these often enough to know them by name.
- Missing conduit and wiring from the original build. Builders stubbed wiring at the gate pad and called it done. No spare conduit for loop detectors, keypads, or photocells. Homeowners have to trench across finished driveways to bring the gate up to UL 325. We run what’s missing.
- Undersized builder-grade operators on double swing gates. A wide driveway with a heavy gate and a too-small motor. The motor strains against thermal expansion every afternoon and burns out within a few summers, while the gate itself is still square. We size the operator to the actual gate.
- Shallow post footings from older manual gates. The 1950s through 1970s ranch-home boom set posts shallow because the gates were manual. Add an operator without resetting the post, and the gate starts sagging and binding within months. Fix the panel without the post and you’ll fix it twice.
- Hard-water calcium scale seizing hinges and rollers. Las Vegas municipal water is among the hardest in the country, and sprinkler overspray leaves mineral crust on gate hardware year-round. A gate that appears dead is often just a seized hinge binding the operator. We check hinges and rollers before we ever condemn a motor.
Pricing for Gate Installation in Las Vegas, NV
Here’s what gate installation in Las Vegas actually costs, based on what we’ve installed and what we’ve had to correct.
- Pedestrian gate install: $1,200-$3,400
- Single swing driveway gate with operator and conduit runs: $3,200-$6,000
- Double swing driveway gate with operator: $4,500-$8,500
- Slide gate with operator, loop detector, and safety photocells: $5,000-$9,800
What moves these numbers in Las Vegas is the state of the post footings, whether conduit is already in place, and whether the gate is being fabricated to an existing block wall opening or built straight and true from new posts. HOA-managed slide gate work often requires a written spec and board review, which we handle. Every job gets a written quote before we start, and no trip charge inside the county. Seniors and veterans get a permanent 10% discount, and any repair over $200 gets $40 off as a standing offer. Call (877) 610-2993 for an exact quote; the estimate is free.
On a 2004 Summerlin-adjacent HOA entry in the 89134 corridor, we pulled a builder-grade LiftMaster slide gate operator that was binding every afternoon. The steel gate had thermally expanded over 3/16 inch and was riding up on the rack. We cut the rack, reset the pinion mesh with a proper post footing, and ran new loop detector conduit while we were in the trench, then re-commissioned the operator with a safety photocell pair the original install never had. That’s the difference between swapping parts and installing it right.
We Also Serve Cities Near Las Vegas
We cover Gate Installation in Las Vegas and the surrounding communities, including Winchester, Paradise, Spring Valley, and Whitney. If you’re in one of those areas and need a gate installed, automated, or corrected, call us. We’ll tell you whether it’s a quick job or a full re-install, and we’ll put the price in writing before we move a single tool.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Las Vegas
Thermal expansion. Las Vegas summer temperatures above 110°F cause steel and aluminum gates to expand several millimeters, which throws slide gates off their track or forces swing gates against their stops. On a slide gate, the gate expands and rides up on the rack, binding the operator. The fix is to reset the rack and pinion mesh with the right clearance for Las Vegas heat, and to make sure the post footing is solid. Call (877) 610-2993 and we’ll correct it before it burns out the motor.
Usually you can automate the existing gate, but the hinge post and footing may need to be reset first. Many Las Vegas manual gates, particularly those added as aftermarket security gates in the older 89101 through 89110 neighborhoods, were set with shallow footings that never anticipated an operator’s torque. We’ll tell you after a look at the post. If the post is sound and the gate is square, we automate it in place.
Builders should have run spare conduit from the gate pad to the operator location for loop detectors, keypad entry, and safety photocells. Many didn’t; they stubbed the operator wiring and left it at that. To fix it now, we trench a dedicated conduit run to the required points and pull the wiring. It’s disruptive work, but it’s the only way to bring the gate to current UL 325 compliance without ripping out finished driveway sections piecemeal. We handle it for Las Vegas HOAs regularly.
Yes. Under UL 325 safety requirements, an automated gate must have a monitored safety device, and in Las Vegas specifically, loop detectors and photocells also prevent warranty headaches because the heat and dust degrade unprotected photo-eye housings faster here. We recommend both a loop detector and a photocell pair on every automated driveway gate. They’re inexpensive insurance against a gate closing on a car or a person, and against the liability that follows.
FAAC and BFT both hold up well in Las Vegas when sized correctly and installed with proper clearance. The brand matters less than the sizing. An undersized operator from any brand will burn out within two or three summers against a gate that’s expanding daily. Hard water scale is a separate issue: it attacks hinges and rollers, not the motor itself, so we check those surfaces before diagnosing the operator. Call (877) 610-2993 and we’ll tell you what’s actually failing, free of charge.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, installing gates across Las Vegas since 2001.
If your gate is sagging, binding, or just not installed the way it should have been, call (877) 610-2993 and talk it through. We’ll give you a straight answer and a written price, and the name on the shop will be the same name on the invoice. That’s the oldest accountability there is.