Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lake Mary
A new driveway gate in Lake Mary typically runs $4,800 to $12,500 installed, depending on the operator, materials, and whether we’re automating a manual gate or starting from scratch. Most installations take two to three days once materials arrive, and we quote the full job in writing before any work starts. If you live in Heathrow, Timacuan, or one of the older subdivisions off Rinehart Road, you already know that Lake Mary gate work comes with HOA layers most towns don’t have. We’ve been sorting through those layers since Hal Gatewood first put his name on the shop in 2001, and a live person answers our phone at (877) 610-2993 around the clock.
Why Gatewood Fence & Gate Is Lake Mary’s Preferred Gate Installation Company
Lake Mary isn’t like Sanford or Longwood when it comes to gates. This city is built on master-planned communities, and that changes how every job runs. We’ve worked with HOA boards in Heathrow, property managers in Timacuan, and architectural review committees across 32746 and 32795 long enough to know which questions they’ll ask before they’ll approve anything. That means fewer delays, fewer surprises, and a job that passes review the first time.
Our Gate Installation team shows up with the right equipment on the truck, not a plan to come back later. Hal has been repairing gates since 2001 and still welds on site rather than hauling panels off to some shop. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When we quote a job in Lake Mary, the price we hand you is the price you pay, and every job carries the 90-Day Done Right Promise in writing.
We also listen. Lake Mary homeowners tell us the same thing over and over: they’ve been burned by a company that quoted one number on the phone and showed up with a different one. We answer calls with a person, not a voicemail tree, and we show up in the window we give you. You want to look us in the eye before you sign anything? Drive to the shop. Hal will be there himself, or you can catch him in the aisle at the hardware store.
Our Gate Installation Services in Lake Mary
Sliding Gate Installation
Sliding gates are the workhorse of Lake Mary’s gated communities, especially where a swing gate would eat up drive lane space. In Heathrow and similar neighborhoods with tight entry lanes and guard shacks, a slide gate keeps traffic flowing without swinging a 20-foot leaf into the visitor lane. We install commercial-duty slide operators sized for high cycle counts, not the residential units a builder would bolt on. Pricing for a new sliding gate and operator in Lake Mary runs $6,000 to $14,000 for a typical single-lane entry.
Swing Gate Installation
Swing gates dominate the residential side of Lake Mary, especially in subdivisions built between 1985 and 2005. The older ones are usually half ornamental iron, half sagging. What few people catch before they call us is that the gate is only as good as the post holding it up. A gate sags in the hinge post, not in the middle, and that’s where we start. New swing gate installations in Lake Mary start around $4,800 and climb with column work, automation, and access control. We set posts deep enough that the gate stays square through ten Central Florida summers.
Security Gate Installation
Security gates in Lake Mary aren’t just for looks. The guard-attended entries in Heathrow run 24 hours a day, seven days a week, at cycle counts that destroy residential-duty operators. A security gate installation has to account for access control wiring, loop detectors, safety edges, and often a box for keypads, card readers, and telephone entry. We run dedicated conduit for every security gate we install, because direct-burial cable in this soil fails in months, not years. Expect $7,500 to $18,000 for a complete security gate package depending on the operator and access system.
Driveway Gate Installation
The typical Lake Mary driveway gate is an ornamental aluminum or wrought-iron double leaf on brick or stucco columns, often on a lot that backs up to a golf course or conservation area. Homeowners want it automated, and most of the time the original build forgot to run power to the gate location. We handle the low-voltage and line-voltage runs, the operator, the safety photocells, and the loop detector as one package. A new automated driveway gate in Lake Mary runs $5,200 to $12,000, with the spread driven by gate size, column condition, and how far we have to trench for power.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Mary
We install and service operators from the brands you actually see in Lake Mary’s neighborhoods: FAAC, BFT, Linear, and Viking among them. Our crews are certified on nine major gate brands, so when a FAAC swing arm gives out on a Timacuan entry or a Viking slide operator starts chattering on Markham Woods Road, we’ve already got the parts on the truck half the time. Hal stocks locally rather than ordering from a warehouse three states away, which means a quicker turnaround for Lake Mary customers and fewer return trips.
Common Gate Installation Problems We See in Lake Mary Homes
- Builder-grade operators worn out by high cycle counts. Lake Mary’s guard-attended entries run 24/7. A residential-duty operator installed by the original builder lasts a year, maybe eighteen months, before the gear train or control board gives up. We spec commercial-duty operators for those applications and we don’t apologize for the difference in cost.
- Undersized post footings from the 1980s and 1990s buildout. Lake Mary’s older HOA communities poured footings sized for ornamental gate hardware, not the weight of brick or stucco-clad concrete block columns. Those columns tilt over time, the hinge posts go with them, and a gate that dragged yesterday is a failure next month. Fix the panel without the post and you’ll fix it twice.
- Lightning damage to operators and loop detectors. Central Florida thunderstorms from June through September pound Lake Mary with near-daily strikes. Surges travel through the buried loop wiring and fry logic boards even when the lightning never touches the gate. If your gate won’t open after a storm, the board is the first place we look.
- Corroded hinge hardware and failed powder coat. Year-round humidity and intense UV accelerate oxidation on any ferrous hardware. Ornamental iron gates that lose their finish start rusting at the hinge pins and pivot points, which is exactly where the load concentrates. A gate that creaks on the way open is usually two seasons from a broken weld.
Pricing for Gate Installation in Lake Mary, FL
Gate installation in Lake Mary runs $4,800 to $18,000 depending on what’s involved. A simple automated driveway gate on existing columns sits at the lower end. A commercial-grade sliding security gate with access control, loop detectors, and new conduit runs higher. The biggest cost drivers in Lake Mary are gate size and weight, operator duty rating, column repair or replacement, and how far we need to run power. Here’s a straight breakdown:
- Automated driveway gate (single leaf, existing columns): $4,800 - $7,500
- Automated driveway gate (double leaf, new columns): $6,500 - $12,000
- Sliding gate with commercial operator (HOA/community entry): $7,000 - $14,000
- Security gate with access control and safety package: $8,500 - $18,000
- Pedestrian gate (new, with closer and latch): $1,200 - $3,400
The price we quote is the price you pay, agreed in writing before any work begins. Estimates are free, and no trip charge inside the county. Call (877) 610-2993 for a written quote.
We Also Serve Cities Near Lake Mary
We cover Lake Mary and the communities packed right against its edges. That includes Longwood, Sanford, Winter Springs, and Heathrow, along with the unincorporated pockets between them along Lake Mary Boulevard and 17-92. If you’re anywhere in the 32746 or 32795 ZIP codes, or just across the line, call and ask. We’ll tell you straight if we can get there.
Serving Lake Mary, FL - Our Local Coverage Area
We’re based in the Lake Mary area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lake Mary
In Heathrow and most of Lake Mary’s master-planned communities, yes, you need HOA and often architectural review approval before any gate installation work begins. This is one of the biggest differences between Lake Mary and the surrounding cities. Across the line in Sanford or Longwood, a single homeowner can usually greenlight their own gate. In Lake Mary, the board or the architectural review committee signs off first, and they’ll want to see specifications for the operator, materials, and often conduit routing. We’ve worked with enough Lake Mary HOAs to know what they’re looking for, and we’ll help you put the submittal together. Call (877) 610-2993 and we’ll walk you through the approval path before you spend a dime.
Because a residential-duty operator isn’t built for a gate that cycles every time a car enters or exits a 500-home community. In Lake Mary’s guard-attended entries, a gate can run 800 to 1,500 cycles a day. A builder-grade swing arm or slide operator rated for 10 to 15 cycles a day wears out its gear train within a year. Then the community is stuck locked open or locked closed while a property manager scrambles for a repair. We install commercial-duty operators sized for the actual cycle count, and we stock the parts locally so we’re not waiting on a warehouse. Call (877) 610-2993 if a builder-grade unit just failed on your community gate.
The big missing piece is usually power. Most manually installed gates in Lake Mary’s older subdivisions never had a conduit run to the gate location during the original build. Adding automation means running line-voltage and low-voltage wiring, installing the operator, setting the limit switches, mounting safety photocells, and burying a loop detector if you want the gate to open automatically for exiting traffic. On a brick column in Lake Mary, we often have to notch the column to run new conduit because the original build left no spare raceway. A manual gate automation job here typically runs $3,800 to $8,000 depending on gate size and trenching distance. Call (877) 610-2993 for a written quote.
If the post tilts even slightly or the gate catches at the latch, the footing is the problem. In Lake Mary’s 1980s and 1990s HOA buildouts, builders often poured footings sized for light ornamental gates, not the weight of the brick or stucco-clad concrete columns they set on top of them. A gate sags in the hinge post, not in the middle, and a new operator bolted onto a compromised post won’t fix the sag. We check the post, the footing, and the hinge weld before we recommend any operator, and we’ll tell you honestly if the post needs work too. Call (877) 610-2993 if your gate is dragging and you want a straight answer.
Yes. Current standards require entrapment protection on any automated gate, which means safety photocells, obstruction sensors, or both, depending on the operator type. A gate that runs 24/7 in a Lake Mary community entry is doing thousands of cycles a month, and the safety devices are the first line of defense against a gate closing on a car or person. We won’t install an automated gate without the proper entrapment protection, and we test the reversing function before we call the job done. If you’re worried a gate on your Lake Mary property doesn’t meet current safety standards, call (877) 610-2993. We’ll inspect it and tell you what it needs.
Call Gatewood Fence & Gate for Gate Installation in Lake Mary
If you need a gate installed, automated, or replaced in Lake Mary, call Hal Gatewood’s crew. We answer the phone around the clock with a person, we show up when we say we will, and the price we quote is the price you pay. Free estimates, no trip charge inside the county, and every job carries the 90-Day Done Right Promise in writing. A gate that isn’t done right isn’t done, and we’ll make it right. Call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lake Mary since day one, with his name on the shop and his word on every job.