Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kirby
Gate installation in Kirby, Texas typically runs $1,800 to $6,400 depending on the gate type, material, and whether you’re adding automation. Most Kirby jobs we quote are swing gates on older chain-link or steel frames, and we’ll give you a written price before any work starts. If you live in the 78244 ZIP code, we’re already familiar with your streets, your soil, and the way your gate was probably hung decades ago. Call (877) 610-2993 and Hal or his crew will walk you through it.
Why Gatewood Fence & Gate Is Kirby’s Preferred Gate Installation Company
We’re the kind of company that keeps a published address and a phone number Hal answers himself. That matters in Kirby, where a lot of folks have been burned by outfits that quote one number on the phone and hand over a different invoice at the door. We’ve been at this since 2001, and the 90-Day Done Right Promise is written on every job ticket. If it’s not right, we come back and make it right. One call does it.
Kirby homeowners tend to have older gates. The post-WWII tract homes off Ackerman Road, the side streets around Old Seguin Road, the blocks near the Kirby Community Center: these are not new subdivisions with pristine entrances. They’re homes built in the 1950s through 1970s, and their gates show it. We know what a sagging hinge post looks like in black clay soil, and we know what happens when a 1965 swing gate finally gives up. Our Gate Installation team has repaired and replaced enough of them in Kirby that we can usually spot the failure point before we even get out of the truck.
Response time to Kirby is straightforward: we schedule real windows and show up in them. A live person answers the phone 24/7, not a voicemail, not a queue. When you call, you get a straight answer about when we can be there and what it’ll cost.
Our Gate Installation Services in Kirby
Driveway Gate Installation
A driveway gate in Kirby is often the first thing people see when they pull onto your street, and around here most of them are swing-style gates across a single or double drive. We install both single-panel and double-panel driveway gates, and we’ll match the gate to your existing fence line, whether that’s chain-link, steel tube, or wood. If you’re on a corner lot near the Kirby city limits, we’ll flag the boundary question before quoting: a new automated driveway gate may fall under Kirby’s permit authority, but cross the line and it flips to San Antonio’s. We check that first.
Pedestrian Gate Installation
Pedestrian gates in Kirby tend to be small, side-yard gates that people use daily. The hard part is usually the post: in black clay soil, a pedestrian gate post set too shallow will tilt within a couple of years. We set posts below the active soil zone and use proper concrete for the clay’s shrink-swell cycle. If you have an older pedestrian gate with a rotted or corroded hinge side, we can often re-hang the existing panel onto new hardware rather than scrapping it.
Sliding Gate Installation
Sliding gates are less common in Kirby’s older neighborhoods but show up on the commercial parcels along Center Street and on some of the larger corner lots. A sliding gate needs a level track or a cantilever design, and it needs a solid post at the receiving end. In Kirby’s soil, that receiver post has to be set deep or the gate will chatter and bind within a couple of rainy seasons. We install sliding gates with safety hardware that meets current UL 325 entrapment-protection standards, and we’ll tell you honestly whether your lot has the room for a slide or whether a swing gate makes more sense.
Swing Gate Installation
Most of what we do in Kirby is swing gate work. A single swing gate across a driveway, a double swing gate on a wider entrance. We see a lot of original 1950s and 1960s swing gates that have outlived their hardware: the hinges are corroded, the frame has sagged, and the post has started to lean. We weld on site, so we can often repair the frame without hauling the gate off. When the gate is too far gone, we’ll tell you that too, and give you a straight price for a new one rather than charging you to patch something that’ll fail again.
We also handle double gate installations and security gate installs for Kirby properties that need a stronger perimeter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kirby
We service and install gate operators from Linear, Viking, Ghost Controls, and DoorKing, among others. For Kirby customers, that matters because a lot of the older openers out here are reaching the end of their service life. If you’ve got an original Linear operator from the 90s or a first-generation Viking control board, we can often keep it running if the parts are still supported. When they’re not, we’ll put in a new operator that fits your gate and show you how it works before we leave. We keep common parts on hand, so we’re not waiting a week for a hinge or a receiver to ship.
Common Gate Installation Problems We See in Kirby Homes
- Leaning hinge posts. Kirby sits on Bexar County’s black clay belt. The soil swells when it rains and shrinks when it dries, and over decades that cycle tilts gate posts out of plumb. In Kirby, we re-set more posts that were poured too shallow than we replace whole gates.
- Rotted or corroded original hardware. The 1950s through 1970s chain-link gates in Kirby usually have galvanized hinges and post caps that have finally given up. The gate still works, sort of, until one morning it doesn’t.
- Obsolete operator control boards. We get calls from Kirby homeowners with working swing gates and dead control boards. Early LiftMaster and Linear boards are often no longer supported, and the honest answer is sometimes a full operator replacement rather than chasing an obsolete part.
- Gates with no modern safety protection. A lot of Kirby gates predate UL 325 entrapment-protection requirements. They’ll open and close, but they won’t stop if a child or a pet is in the path. Adding photocells and proper edge sensors to an older automated gate is one of the more common retrofits we do here.
On a 1960s ranch house off Ackerman Road, our crew replaced a sagging chain-link swing gate where the original galvanized hinge post had rotted at the footing. We set a new post in concrete with proper depth for black clay soil, corrected the sag with new hinges, and installed a LiftMaster LA400 swing gate operator with safety photocells. The homeowner had been manually lifting the gate for years because the old opener board was obsolete. Took us most of a day, and the gate swings true now.
Pricing for Gate Installation in Kirby, TX
Here are straight numbers for Kirby. A basic steel or chain-link pedestrian gate install runs $350 to $900. A single swing driveway gate in steel or aluminum typically runs $1,800 to $4,200 depending on width, material, and hardware. A double swing gate runs $2,800 to $6,400, and a sliding gate with a track or cantilever system starts around $2,500 and goes up with automation. Add an operator and safety package, and you’re looking at an additional $800 to $2,500 on top of the gate itself. Prices in Kirby track about 5-10% under what you’d see quoted in San Antonio proper, mostly because the lots are smaller and the access is usually straightforward.
Every quote is written, itemized, and agreed before we start. No trip charge inside the county. $40 off any repair over $200 if it turns out you need a repair instead of a full install. And a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Kirby
Besides our Kirby work, we regularly take gate installation jobs in Windcrest, Converse, Live Oak, and Universal City. If you’re near the Kirby city line and not sure whether your address falls under Kirby’s permit authority or San Antonio’s, call us and we’ll check before we quote.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kirby
It depends on how far the post has moved and whether the concrete footing is cracked. If the footing is intact and the post has simply tilted, we can sometimes straighten it and pack the base. If the footing has shifted or rotted, which is common in Kirby’s clay, the post needs to be dug out and re-set at proper depth. That’s the fix that lasts. Call (877) 610-2993 and we’ll take a look and give you a straight answer.
In most cases, yes. If the operator still has a functioning control board and power, we can add photocells and an external edge sensor so the gate stops and reverses on contact. Some early LiftMaster boards don’t have the input ports, and in that case the safer fix is a new operator. We’ll tell you which one you have. Call for an exact quote, estimates are free.
Kirby is its own incorporated municipality, so permits for gate work inside the 78244 ZIP code fall under Kirby’s authority, not San Antonio’s. If the job involves structural post replacement or a new automated operator, a permit is often required. If your address sits near the boundary and the work crosses into San Antonio, the authority flips. We verify the exact city boundary before quoting any automated or structural gate job, so you don’t get caught with a stop-work order.
We replace hinges all the time without taking the gate down. If the frame itself is still solid, we cut the old hinges off, weld new ones in place, and re-hang the gate. If the post is also failing or the frame is sagging badly, you may be better off putting that hinge money toward a new gate rather than repairing one that’s about to fail in a different spot. We’ll show you the condition and let you decide.
The post moves. In Kirby’s black clay, if the post was set too shallow or without a proper concrete collar, the shrink-swell cycle will shift it within a couple of years and the gate will start to drag or bind. That’s why we set posts below the active soil zone and use a deeper footing than the county minimum. It costs a little more up front and saves you a re-set two years later. Call (877) 610-2993 for a free estimate on any gate install or repair in Kirby.
Key Takeaways
- Gate installation in Kirby runs $1,800 to $6,400 for most driveway gates, with pedestrian gates starting around $350.
- Kirby has its own permit authority for gate work; boundary verification matters before quoting.
- Black clay soil in Kirby tilts and shifts gate posts more than most people expect. Proper post depth is the single biggest factor in how long your gate stays level.
- We weld on site, so many older Kirby gates can be repaired rather than replaced.
- Every quote is written and agreed before work starts. No trip charge inside Bexar County.
Get Your Kirby Gate Installed Right
If you’re in Kirby and you’ve got a gate that’s sagging, a post that’s leaning, or an opener that’s gone quiet, call us. Hal Gatewood and his crew have been doing this since 2001, and we’ll give you a straight answer and a written price. The name is on the shop, and the shop is a short drive from Kirby. That’s the oldest accountability there is. Call (877) 610-2993 for a free estimate, or stop by and look us in the eye.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kirby since 2001.