Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kings Park
A new driveway or pedestrian gate in Kings Park typically runs $2,400-$7,800 installed, depending on the gate style, operator choice, and post work the site requires. We quote the full job before any work starts, and the number we give you is the number on the invoice. Hal Gatewood has been building and repairing gates since 2001, and we’ve spent enough time on Kings Park’s tree-lined streets to know that salt air off Long Island Sound and 50-year-old post footings change the entire job. Call (877) 610-2993 and you’ll get a live person, not a voicemail queue.
Why Gatewood Fence & Gate Is Kings Park’s Preferred Gate Installation Company
Kings Park homeowners call us because we answer the phone ourselves and we show up when we say we will. The 11754 ZIP has a lot of gates that were hung in the Reagan administration, and the people who live there have learned that a national outfit quoting one price on the phone and charging another at the door is not the exception, it’s the business model. Our model is the opposite. Hal owns the shop, his name is on every invoice, and the 90-Day Done Right Promise is stamped in writing on every job. If something isn’t done right, one call brings him back. No runaround.
We’re certified on nine major gate brands including FAAC, BFT, Linear, and Viking, and we keep parts on the truck that other companies have to order in. That matters in Kings Park, where a failed LiftMaster operator on a 1980s ornamental double gate is a weekly occurrence. When you call us from a shaded lot off Old Dock Road or a ranch home near Meadow Road, we already know what we’re likely to find before we pull up. That local knowledge is not something you can fake with a website.
Our Gate Installation Services in Kings Park
Driveway Gate Installation
A driveway gate in Kings Park starts at about $3,200 for a single swing gate with a basic operator, and $5,400-$7,800 for a double gate with entrapment protection and a modern control board. The biggest variable on a Kings Park job is the post footing. Homes built during the 1960s and 70s suburban boom around the old Kings Park Psychiatric Center often have original galvanized posts set in shallow concrete that heaves every winter. We set new footings below frost depth so the gate stays plumb through March.
Pedestrian Gate Installation
Pedestrian gates in Kings Park run $900-$2,600 depending on width, material, and whether you want a keypad or intercom. We see a lot of salt-corroded latch hardware on the walk gates that face Long Island Sound, and we install stainless and powder-coated hardware that holds up better in coastal air. A properly hung pedestrian gate on a new post should not sag for years, not months.
Sliding Gate Installation
Sliding gates are a good fit for Kings Park driveways where a swing gate would eat too much space or fight the grade. Sliding gate installs run $4,200-$8,500 including the operator, track or cantilever roller system, and safety photo eyes. On the hilly streets near Nissequogue River State Park, we often recommend a cantilever slider so leaves, snow, and storm debris don’t jam a ground track. Salt air means the roller hardware has to be sealed units, not the cheap ones that seize after two winters.
Swing Gate Installation
Most Kings Park driveways have swing gates, and most of the ones we’re called to replace are double swing gates from the 1980s and 90s that have cracked welds at the hinge posts. A new swing gate installation runs $2,400-$6,900 depending on single or double, ornamental iron or aluminum, and operator. We weld on site. The gate never leaves your driveway, and we do not swap a panel without fixing the post, because a gate sags in the hinge post, not in the middle, and that is where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kings Park
We install and service FAAC, BFT, Linear, and Viking operators, along with five other major brands. For Kings Park’s salt-air shaded lots, we frequently recommend FAAC swing gate operators for their sealed limit switches and heavy-duty gearboxes, and BFT for sliding gates where a reliable obstruction sensor matters. Because we stock parts locally, we’re not waiting on a warehouse in another state when a BFT control board fails on a Kings Park gate. The parts are here, and we are here.
Common Gate Installation Problems We See in Kings Park Homes
- Rust-through at concrete collars: original galvanized chain-link and gate posts from the 1960s and 70s are rusting through right where the post meets the concrete collar. You can’t fix the sag until the hinge post gets replaced.
- Seized pivot hinges on 1980s ornamental iron: salt air off Long Island Sound accelerates oxidation on uncoated iron, and by the time the gate won’t swing, the hinge pins have often galled beyond saving. Welding a new hinge barrel is sometimes possible; a new post is sometimes the cheaper answer.
- Freeze-thaw heave throwing gates out of plumb: Kings Park’s winter cycle freezes and thaws the soil repeatedly, and older shallow-set posts heave. By early spring, the gate won’t latch and the operator strains until it burns out.
- Shaded-lot corrosion near Nissequogue River State Park: properties on the wooded streets bordering the park get double punishment: coastal salt air plus constant shade and moisture from tree canopy. Hinge posts and operator boards on those lots fail noticeably faster than on open yards in Commack.
Pricing for Gate Installation in Kings Park, NY
Here’s what Kings Park homeowners should expect to pay for gate installation:
| Gate Type | Typical Installed Range (11754) |
|---|---|
| Pedestrian gate (basic aluminum or vinyl) | $900 - $2,600 |
| Single swing driveway gate with operator | $3,200 - $5,400 |
| Double swing driveway gate with operator | $5,400 - $7,800 |
| Sliding gate with operator | $4,200 - $8,500 |
| Security gate (steel, reinforced, with access control) | $6,500 - $12,000+ |
The price includes the gate, operator, hardware, post work, and a written 90-Day Done Right Promise. What changes the number most in Kings Park is the condition of the existing posts and the footing depth. Replacing a rusted hinge post set in a shallow 1970s footing adds real cost, because the alternative is a gate that sags again in two years. We quote before we start, and the quote doesn’t creep. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Kings Park
Our Gate Installation team works throughout the North Shore and central Suffolk, including Smithtown, Commack, East Northport, and Elwood. If you’re in one of those towns and need a new gate or a second look at an estimate you already have, we’ll come. Learn more about our work in this area on the Kings Park page.
Serving Kings Park, NY - Our Local Coverage Area
We’re based in the Kings Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kings Park
Yes, in most cases. UL 325 requires entrapment protection, typically photo eyes and a reversing mechanism or contact edge, on all automatic gate operators. If your existing operator is a LiftMaster, FAAC, BFT, Linear, Viking, or another supported brand and the control board has input terminals for safety devices, we can usually retrofit photo eyes and a contact edge without replacing the whole operator. If the control board is obsolete and won’t accept modern entrapment sensors, replacement is the only code-compliant option, and we will tell you that honestly before any work starts. Call (877) 610-2993 and we’ll check your board.
The soil near the Nissequogue River and the park boundary holds more moisture, and Kings Park’s winters freeze and thaw enough to heave a shallow footing by an inch or more each season. An inch at the post means a quarter-inch gap or a latch that won’t catch at the gate leaf. Our crew sets new post footings below frost depth, typically 42 inches in Suffolk County, and we pour concrete with a drainage base so water doesn’t pool against the post. We recently replaced a seized swing gate on a shaded lot off Old Dock Road where the failed footing had been poured at 24 inches, and the post had leaned enough to crack the operator arm. The gate was fine; the footing was the problem.
Look at the post, not the gate. Worn hinge barrel bushings cause the gate leaf itself to drop slightly at the latch end while the post stays plumb. A rusted hinge post leans, and you’ll typically see rust staining at the concrete collar, flaking metal, or a visible gap between the post base and the concrete. In Kings Park, where salt air has been working on iron since the 1980s, the post is usually the culprit. If you can grab the gate and rock it and the post moves with it, the footing has failed. Call us and we’ll tell you which one you’re dealing with before you spend a dollar.
We lean toward FAAC for swing gates on Kings Park’s shaded, salt-air lots, because the sealed gearbox and limit switch design holds up better in damp, corrosive conditions than exposed competitors. For sliding gates on the same type of lot, we’ll often recommend BFT, because their obstruction sensing handles cold-weather operation more reliably. The brand matters less than the installation details, though: sealed wire nuts, dielectric grease on connections, and a post footing that drains. A properly installed operator on a properly set post will outlast the same unit thrown on an old heaving post by years. Call (877) 610-2993 for a site-specific recommendation.
In most cases, no. Replacing a residential gate operator on an existing residential gate in the Town of Smithtown, which governs Kings Park, typically does not require a building permit when you’re swapping like-for-like. However, if you’re adding a new gate where one didn’t exist, running new electrical for an operator, or changing the gate’s swing direction so it opens over a public sidewalk, a permit and possibly a zoning review can come into play. When we quote a Kings Park job, we’ll flag anything that needs town approval before we start, so you’re not dealing with it after.
Call Gatewood Fence & Gate for Gate Installation in Kings Park
If you live in Kings Park and you need a new gate, a second opinion on an estimate, or someone to look at a post that has been rusting since the Clinton administration, call (877) 610-2993. Hal answers the phone, or someone from his crew does. We’ll give you a straight quote, show you what’s wrong before we touch anything, and stand behind the work with the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kings Park since 2001.