Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kings Park West
Gate installation in Kings Park West, VA typically costs between $2,800 and $9,500 for a full driveway gate, while pedestrian gate installs run $1,200 to $3,400. Most jobs in the 22032 zip code take one to two days once materials are on site, and we quote the full price before any work begins. If you’ve got a gate that’s sagging, rotted, or simply past saving, call Gatewood Fence & Gate at (877) 610-2993 and Hal will come out himself to measure, walk the lot, and give you a written Gate Repair - Kings Park West quote you can hold us to.
Kings Park West is a specific place to work. The homes were built in a tight window, mostly between 1968 and 1985, which means every gate on the block is aging at the same rate. We know the soil, we know the HOA process, and we know the difference between a post that needs re-setting and one that’s been dead for five years.
Why Gatewood Fence & Gate Is Kings Park West’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001 and put his name on the shop. That matters in Kings Park West, where the Civic Association reviews exterior changes and neighbors talk. We show up with a published address, a real license number, and a crew in uniform. More than half our Kings Park West work comes from referrals down the street or around the corner, and that’s the reputation we actually care about.
Our Gate Installation team has replaced and retrofitted more gates in the 22032 zip code than most companies install in a year. We’re not a national chain with a rotating cast of subcontractors. The person who answers the phone at midnight is the same person who will stand in your driveway the next morning and tell you honestly whether your gate can be salvaged or whether it’s time to start fresh.
Calls are answered by a live person, 24 hours a day. Not a voicemail. Not a call center three states away. If your gate fails on a Sunday night and your driveway is wide open, you’ll talk to someone who knows what a hinge post is.
Our Gate Installation Services in Kings Park West
Swing Gate Installation
Swing gates are the most common setup in Kings Park West, especially on the colonial and split-level lots built between the late 1960s and mid-1980s. We install single and double swing gates in steel, aluminum, composite, and pressure-treated wood, and we set every post at least 30 inches deep with gravel drainage. The frost line in Fairfax County runs 18 to 24 inches, but Piedmont clay heaves harder than most soils, so we go deeper than code minimum by default.
Double Gate Installation
Double gates on rear lots that back to wooded buffers come with their own set of problems. The two leaves have to meet cleanly at the center, and if one post has shifted even half an inch, the gap widens and the latch stops catching. In Kings Park West, we regularly see double gates where one hinge post has canted forward from freeze-thaw cycles while the other stayed put. We square both posts, set new footings, and hang the leaves so they close dead center every time.
Pedestrian Gate Installation
Pedestrian gates in Kings Park West don’t get the same attention as driveway gates, and that’s exactly why they fail so often. Many original rear-yard gates were built with pressure-treated posts set 18 inches deep and hardware that’s now rusted through. We install walk gates with galvanized or powder-coated hinges, rot-resistant framing where the lot backs to stream valley, and proper post depth that won’t shift in the clay. A new pedestrian gate with quality hardware typically runs $1,200 to $3,400 including labor, materials, and a written quote you approve first.
Sliding Gate Installation
Sliding gates are less common in Kings Park West because most driveways are already wide enough for swing gates, but we do install them where a slope or a tight turnaround makes a swing gate impractical. Sliding gates need a steel track, guide rollers, and a cantilever or wheeled frame, and the ground prep matters in clay soil. We compact the base properly so the track doesn’t settle unevenly within the first year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kings Park West
Hal is certified to service nine major gate operator brands, and in Kings Park West we keep a rolling stock of Gate Parts & Welding - Kings Park West for the ones we see most often: Linear, Viking, Ghost Controls, and DoorKing. If your operator from the 1980s has a dead control board and the part is discontinued, we’ll tell you straight and show you the retrofit alternatives. We can also set you up with a new opener from any of the brands above, wired and tested the same day the gate goes in.
Common Gate Installation Problems We See in Kings Park West Homes
- Gate posts heaving from Piedmont clay freeze-thaw cycles. Fairfax County’s clay swells when wet and contracts when dry, and winter makes it worse. Posts set at 18 to 24 inches, which was the old normal, shift every season until the footing cracks. We set at 30 inches minimum, with gravel drainage at the base.
- Rotting hinge posts on 40-year-old wooden gates. Most Kings Park West privacy fences went in with the original homes between 1968 and 1985. The posts below grade are now spongy, and the gate sags even though the hinges look fine on the surface. We replace the post, and if the panel is still sound, we hang it back up.
- Rear gates rotting twice as fast near Long Branch and stream buffers. Lots that back to shaded, moisture-heavy parkland see wooden gates fail years before street-facing ones. If your rear gate frame is soft at the corners, metal or composite framing is the smarter replacement.
- Legacy operators without modern entrapment protection. Before UL 325, gate openers didn’t require photocells or auto-reverse. Old control boards can’t be retrofitted safely, and replacement boards are often discontinued. We install new operators with current safety features and explain exactly what changed.
Pricing for Gate Installation in Kings Park West, VA
A single swing driveway gate in Kings Park West runs $2,800 to $5,500 installed, with steel or aluminum on powder-coated steel posts. A double swing gate runs $4,500 to $9,500 depending on width, material, and whether you add a gate operator. Pedestrian gates run $1,200 to $3,400. Sliding driveway gates run $5,000 to $10,500, with track prep and ground work accounting for a larger share of the job.
What moves the price: gate material, post depth and drainage work, operator type, and whether the old post footings need to be broken out. We don’t do vague estimates. The number Hal writes down is the number you pay, and it’s agreed before any work starts. Standing offers apply: $40 off any install over $200, no trip charge inside Fairfax County, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Kings Park West
We install gates throughout the surrounding Fairfax County communities, including Burke, Fairfax, Springfield, and Mantua. If you’re in Gate Installation in Kings Park West territory and need us next door, we’re already familiar with the same county code, soil, and HOA landscape. Call (877) 610-2993 and tell us what street you’re on.
Serving Kings Park West, VA - Our Local Coverage Area
We’re based in the Kings Park West area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kings Park West
Yes, in most cases you need approval from the Kings Park West Civic Association before changing the material or appearance of a gate that’s visible from the street. The Civic Association maintains aesthetic guidelines for exterior changes, and Fairfax County also has fence and gate permit requirements for certain installations. We can help you understand what applies to your lot and what documentation the association expects. Call (877) 610-2993 and we’ll walk you through it.
Because the hinge post is moving below grade, not the hinges themselves. In Kings Park West, the Piedmont clay holds water, freezes, and expands, and any post set shallower than the 18 to 24 inch frost line will cant a little more each winter. Once the footing cracks, the post leans and the gate sags at the latch side. The fix is a new post set deeper, not shimming the hinges.
Install rot-resistant composite or powder-coated metal framing for any gate on a lot that backs to Long Branch or other Accotink Creek stream-valley buffers. The permanent shade and ground moisture in those rear yards can rot a wooden frame in half the time of a street-facing gate. We see this constantly on lots in the 22032 zip code. Composite and metal cost more upfront but you won’t be replacing the frame in six or seven years. Call (877) 610-2993 for a free measure and written quote.
Usually you need a new operator. Gate openers installed before UL 325 standards became mandatory don’t have the control logic to support entrapment protection, and the old boards can’t be flashed or upgraded. Homemade retrofits are unsafe, especially with double swing gates moving under motor power. We install new operators from Linear, Viking, Ghost Controls, and DoorKing with photocells, auto-reverse, and entrapment sensing built in.
Because the county minimum doesn’t account for how Fairfax County clay actually behaves here. The frost line is 18 to 24 inches, but Piedmont clay swells and shrinks through wet-dry cycles even below that depth, and posts set at 24 inches still shift over time. We set at 30 inches with gravel drainage so the post has mass below the active clay zone and water doesn’t pool at the footing. It costs a little more upfront and stops the gate from canting within two winters.
Call Gatewood Fence & Gate for Gate Installation in Kings Park West
If your gate is sagging, rotted, or the operator died years ago, call Hal at (877) 610-2993. He’ll come out to Kings Park West, look at the posts, check the soil, and give you a written price before any work starts. Free estimate, no trip charge inside Fairfax County, and the 90-Day Done Right Promise on every job. If it’s not done right, we come back and make it right. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kings Park West since 2001.