Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kings Bridge
A new gate in Kings Bridge runs between $2,400 and $11,000 depending on whether you need a pre-hung iron double gate, a sliding driveway gate with a Linear operator, or a roll-down security gate for a Broadway storefront. Most residential installs in the 10463 zip code land between $3,800 and $6,800, including removal of the old gate and re-coring rotted posts. We answer the phone live at (877) 610-2993 and can usually have a crew at your building within a day to measure and quote. Hal Gatewood has been doing this work since 2001, and the shop is close enough that you can drive over and look him in the eye before you sign anything.
There’s no call center and no national outfit subcontracting your job. Just our own people, our own welding rig, and a written price that doesn’t change at your door.
Why Gatewood Fence & Gate Is Kings Bridge’s Preferred Gate Installation Company
Kings Bridge is not like a new subdivision in Westchester where every house has a roomy driveway and a two-car garage. Here you’ve got pre-war brick rowhouses on side streets, six-story apartment buildings on Kappock Street and Bailey Avenue, and commercial storefronts along Broadway that need security gates that actually work every morning. We know these buildings because we’ve worked on hundreds of them. We know that a gate post set in 1920s concrete on Tibbett Avenue is going to move when the ground freezes. We know that a sliding gate on a shared driveway off Kingsbridge Road has to be staged so your neighbor can still get their car out. That stuff doesn’t show up in a generic install manual.
Our reputation in Kings Bridge comes from showing up, doing the work with the gate still on your property, and standing behind it with the 90-Day Done Right Promise in writing. If we set a post and it’s wrong, one call brings us back. No runaround, no “that’s not covered.” We also hold a strong local review record from Kings Bridge customers, and a live person answers our phone 24/7. You’ll never wait for a voicemail or a dispatch queue when your gate won’t close and your building is open to the street.
Our Gate Installation Services in Kings Bridge
We do full Gate Installation in Kings Bridge, from demolition of the old iron to the final safety sensor check. Here’s what that looks like for the four jobs we handle most often in 10463.
Driveway Gate
Most driveway gates in Kings Bridge are hung on legacy steel or wrought iron posts that predate modern building codes. We don’t weld new hinges onto a rotted post and call it done. We re-core the footing, set the post to depth, and plumb it before the panel ever goes on. On a side street off Kingsbridge Road we recently replaced a double swing gate where one post had heaved two inches out of level from a hard winter. The new panels were Laser-cut steel, powder coated, and squared to the curb line so they close without dragging.
Sliding Gate
Sliding gates are the right call for Kings Bridge shared driveways and narrow lots where a swing gate would block the sidewalk or the neighbor’s access. These installs need more than a track and a motor: the frost line matters, the gate travel clearance matters, and the loop detectors in the apron have to be set so the gate doesn’t close on a parked car. We install Viking and DoorKing slide operators on rack and pinion drives and set the safety loops before we hand you the remotes.
Swing Gate
A properly hung swing gate in Kings Bridge starts with the post, not the panel. We dig below the heave line, pour a footing that won’t shift after a Bronx freeze-thaw, and then hang the leaf so it clears the pitch of your driveway. Many of our swing gate installs here are on pre-war rowhouse driveways where the apron slopes toward the street and a poorly set gate will bind on the uphill side within a season. We account for that before the concrete sets.
Pedestrian Gate
Pedestrian gates in Kings Bridge often guard building side entrances and rear service courts, and they take far more cycles than a driveway gate. We install with weld-on barrel hinges instead of screw hinges whenever the frame allows, and we set the latch strike so it doesn’t rattle loose from slamming in the wind off the Harlem River. For gated vestibule entries on 4-to-6 story buildings, we’ll match the existing ironwork profile so the new gate doesn’t look like a patch job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kings Bridge
We’re certified on nine major gate operator brands, and for Kings Bridge work we stock parts for the ones we see most: Linear swing and slide operators, Viking commercial operators, Ghost Controls kits for residential gates, and DoorKing slide and barrier operators for apartment and commercial lots. If you already have an operator and you’re happy enough with it, we install the new gate around it and run new conduit and wiring. If the operator is old and tired, we’ll quote a replacement in the same visit. We keep common control boards, remotes, photo eyes, and loop detectors on the truck, so most Kings Bridge installs don’t stall waiting on a part.
The Kings Bridge Installation Approach
Here’s the thing about gate work in Kings Bridge: you can’t just set posts and hang panels the way you would in a new-construction suburb. In the 10463 zip code, pre-war apartment buildings and rowhouses often have gate posts embedded in original concrete aprons that heave every freeze-thaw cycle. We’ve pulled posts on Godwin Terrace and found the old concrete cracked all the way through, with rebar that rusted to dust decades ago. So our installation approach here always includes re-coring the footing and re-setting it below the frost line, not just welding new hinges onto a drifting post. That one step is the difference between a gate that’s still square in five years and one that sags within a season. A gate sags in the hinge post, not in the middle, and that’s where we start.
We also plan the staging around shared driveways and rights of way. In Kings Bridge, a lot of gates sit on strips of land two families use. When we replaced a rowhouse gate on a narrow side street off Kingsbridge Road, a swing gate would have blocked the shared driveway and the sidewalk every time it opened. We mounted a LiftMaster gate operator with a rack and pinion drive, placed loop detectors in the asphalt apron, and set reach-in keypad entry posts on both sides because the prewar brick wall left no room for a standard pedestal. During the work, we kept one leaf of the old double gate functioning for pedestrian access while we re-cored the hinge posts in the frozen concrete. The neighbor never lost access. That’s how it has to work here.
Common Gate Installation Problems We See in Kings Bridge Homes
Kings Bridge has a specific set of gate problems, most tied to the age of the housing stock and the Bronx winters. Here’s what we run into:
- Heaving posts from freeze-thaw cycles. Original concrete aprons from the 1920s crack and shift every winter, pushing gate posts off plumb and making new gates bind. We re-core below the frost line so the post stops moving.
- Rusted-through wrought iron from road salt. Broadway and Kingsbridge Road get heavy brine spray all winter. Iron posts and hinge plates pit fast, especially on gates close to the curb. We replace with galvanized or powder-coated steel where the old iron is beyond welding.
- Sliding gates on shared driveways that fail because loop detectors were skipped. Without a properly placed loop in the apron, a slide gate will close on a parked car or refuse to close at all. We set loops before the gate goes live and test them with a real car.
- Security gate installs on Broadway storefronts with no room for photocells. Daylight basements, pipe bollards, and narrow sidewalks leave nowhere for standard sensor posts. We re-route conduit and use low-profile reflective eyes so the gate meets UL 325 without eating the sidewalk.
Pricing for Gate Installation in Kings Bridge, NY
A typical single swing gate install in Kings Bridge runs $2,400 to $5,200. A sliding driveway gate with a new operator runs $4,800 to $8,500. Commercial roll-down security gates for Broadway storefronts start around $6,000 and can reach $11,000 with motor, slat, and bottom-bar replacement. Double gates on shared driveways typically run $5,500 to $9,000 because both leafs have to be set, squared, and tied into a single operator. What moves the price: re-coring failing footings, running new conduit for safety sensors, matching existing ornamental ironwork, and the condition of the posts. We quote the full price before any work starts, and that price is the price. Free estimates in Kings Bridge, no trip charge inside the county, and $40 off any install over $200. Veterans and seniors get a permanent 10% discount. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Kings Bridge
Our crew works across the northwest Bronx and into the neighborhoods around Kings Bridge, including Spuyten Duyvil, Fordham, Riverdale, and Morris Heights. If you’re in one of those areas and your gate is failing, the same live phone line gets you the same crew and the same written price.
Serving Kings Bridge, NY - Our Local Coverage Area
We’re based in the Kings Bridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kings Bridge
Because the panel was never the problem. The post was. In Kings Bridge, original concrete aprons from the 1920s to 1940s heave every freeze-thaw cycle, and a new gate hung on a moving post will sag fast. We re-core and re-set the footing below the frost line before we hang anything, which is the only way to stop the sag at the source. Call (877) 610-2993 and we’ll inspect your post before you spend money on a new panel.
Yes, and we do it regularly on side streets off Kingsbridge Road and Tibbett Avenue. We keep one leaf of the old double gate working as pedestrian access while we re-core the other side, and we stage the slide track so the neighbor’s car can still pass. The install finishes with both family’s remotes programmed and the safety loops tested. For a shared driveway slide gate in Kings Bridge, budget $4,800 to $8,500.
We use low-profile reflective photo eyes and re-route the conduit up and around daylight basements and pipe bollards instead of setting standard pedestal sensors in the walkway. The gate still meets UL 325 safety standards, but the sidewalk stays clear and the sensors survive street sweeps. This is one of the most common fixes we make on Broadway between 225th and 238th.
Yes, three of them. The original iron is heavier than modern steel, so the operator has to be sized for the leaf weight, not just the opening width. The posts often have no flat mounting surface, so we weld on a steel backer plate before bolting the operator arm. And the wiring can’t be surface-run across a historic entry, so we run it through the post or under the apron in conduit. We’ve done this on pre-war buildings all over 10463, and we can usually match the existing iron profile so the operator disappears into the design. Call (877) 610-2993 for a site visit.
A sliding gate, or a single swing leaf hinged on the building side to open inward tight against the wall. In a 10-foot court, a swing gate that opens outward will block the alley and a double gate will eat the whole space. We measure the actual clearances and the direction of foot traffic before recommending anything. For tight Kingsbridge service courts, a slide gate with a recessed track runs $4,500 to $7,500 installed. Call (877) 610-2993 and we’ll come measure it for free.
Contact Gatewood Fence & Gate in Kings Bridge
If your gate is failing, or you’re ready to replace it, call us at (877) 610-2993. We answer live, day or night. We’ll schedule a free measure, give you a written price that won’t change at your door, and show up in the window we promised. Hal Gatewood has been at this since 2001 and the name is on the shop, the van, and every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.