Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Jacksonville
Gate installation in Jacksonville runs $1,800 to $8,500 for most residential work, with sliding driveway gates on the higher end and pedestrian gates on the lower. We’re a local, owner-operated shop, and we handle everything from a simple swing gate on a Riverside bungalow to a full double gate with automation in a Southside HOA. Call (877) 610-2993 and Hal Gatewood or one of his crew will answer. No voicemail, no queue.
We’ve been at this since 2001, which means we know what Jacksonville gate work actually looks like: sandy soil that shifts posts, salt air that eats hardware, and old FAAC and LiftMaster operators out in the Baymeadows and Mandarin subdivisions that are all failing around the same time. That local knowledge matters more than most people realize.
Why Gatewood Fence & Gate Is Jacksonville’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, the shop is in this market, and the phone number has been the same for over two decades. When a homeowner in Arlington or Ortega calls, they get a live person who knows the streets, not a script. That’s the oldest accountability there is.
We’re not some faceless national outfit that quotes one price over the phone and shows up with another. Our Gate Installation crew does the work with the same people from start to finish. The person who surveys your driveway is the person who welds your hinges. We stand behind every job with the 90-Day Done Right Promise in writing: if it’s not right, we come back. No runaround.
Jacksonville homeowners between 50 and 70 have seen the bait-and-switch before. They call us because the estimate we give is the price they pay, before any work starts, agreed to in writing. That’s not a selling point to us. It’s just how you run a business you intend to keep.
Our Gate Installation Services in Jacksonville
We install gates in every corner of Jacksonville, from the riverfront properties near San Marco to the subdivisions off Hodges Boulevard in the 32215 and 32216 ZIPs. Every job starts with a look at the actual driveway: the slope, the soil, the clearances, the way the existing fence ties in, and whether a neighbor shares the access.
Driveway Gate Installation
A driveway gate in Jacksonville has to handle more than open and close. It has to hold its post alignment in sandy coastal-plain soil and survive the humidity and salt air that blow inland from the Intracoastal. We set posts deeper than code minimums and we don’t cut corners on the concrete. Where a driveway gate meets a shared access or a narrow setback, we’ll design around it so both properties can keep using the drive while we work.
Pedestrian Gate Installation
Pedestrian gates in Jacksonville’s older neighborhoods, especially Riverside, Avondale, and Springfield, often belong to early-1900s houses with strict historic character. We install new pedestrian gates that hold up to decades of coastal humidity without rusting out at the bottom hinge, and we can match period-appropriate steel work so the gate doesn’t look like it was dropped in from a catalog.
Sliding Gate Installation
Sliding gates are the right answer for a lot of Jacksonville driveways, particularly where a swing gate would arc into the street, block a neighbor’s parking, or climb onto a sidewalk. We install rack and pinion sliding gates in the Southside and Baymeadows areas all the time, welded and anchored for high-wind loading during tropical storm season. A slide gate is also the only practical choice when the driveway rises steeply or a vehicle is parked tight to the entry.
Swing Gate Installation
Swing gates fit Jacksonville properties with a flat entry and enough set-back for the gate leaf to arc without hitting anything. We install single and double swing gates, and we always account for the way Jacksonville’s shifting soil affects hinge posts. A gate that sags in the middle isn’t sagging in the middle: the hinge post has moved, and that’s where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jacksonville
We’re certified to service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, Elite, DoorKing, Ghost Controls, and Mighty Mule. We keep common parts on hand for Jacksonville’s aging suburban gate systems, so we’re not waiting on a truck from out of state to finish your install. When a FAAC or Linear operator from the late 1990s finally gives up in a Southside subdivision, we can usually have the replacement moving the same week, not the same month.
Common Gate Installation Problems We See in Jacksonville Homes
- Post heave and footing rot in sandy soil. Jacksonville’s coastal-plain soil drains fast and shifts with wet and dry cycles, which is why a gate post set too shallow will lean within the first year. We pour deep footings and set posts below the frost and root zone.
- Salt air corrosion on tracks and hinges. The Atlantic and the St. Johns River estuary push salt-laden air 20 to 30 miles inland, far beyond what most people expect. Slide gate tracks in Jacksonville bind and strip rack and pinion gears faster than in inland Florida cities, so we spec corrosion-resistant hardware from day one.
- Shared driveway access conflicts. A lot of Jacksonville properties, especially in older riverfront neighborhoods, have shared driveways. Installing a gate without a loop detector or a proper swing path means the neighbor gets trapped in their own driveway when the gate fails to auto-open. We design for that from the start.
- HOA operator failures across entire subdivisions. Hundreds of Jacksonville gated communities were built by the same developers in the 1997-2006 window, and their original FAAC and Elite operators are hitting end-of-life at the same time. When one street starts calling, the next street over is usually a few months behind.
Pricing for Gate Installation in Jacksonville, FL
Here’s what Jacksonville gate work actually costs, based on the jobs we’ve done in the last several years:
- Pedestrian gate (steel or aluminum, manual): $1,800-$3,200
- Single swing driveway gate (manual, standard steel): $2,600-$4,800
- Single swing driveway gate with operator and keypad: $4,200-$6,800
- Sliding driveway gate with operator, track, and rack: $5,000-$8,500
- Double swing gate with operator and loop detector: $5,500-$9,000+ depending on width and automation
The price is set before work starts, in writing, and that’s the price. We don’t show up and “discover” extra costs midway through. We also have standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Jacksonville
Our Gate Installation work regularly takes us out to Jacksonville Beach, Oakleaf Plantation, Bellair-Meadowbrook Terrace, and Fruit Cove. If you’re inside Duval County or just over the line, we’ll come out, look at the driveway, and give you a written price. Gate Installation in Jacksonville is what we do every week, and we treat the outlying areas the same way.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Jacksonville
A swing gate is usually cheaper and simpler, but it needs enough set-back space for the gate leaf to arc open without hitting the street, a parked car, or a neighbor’s property. A slide gate runs along a track parallel to the fence line, so it’s the right choice when your Jacksonville driveway is tight, narrow, or shared. We’ll look at the actual measurements and tell you which one actually fits, rather than selling you whichever one costs more.
In Jacksonville’s historic districts like Riverside, Avondale, and Springfield, yes, you often need design review approval before altering street-facing gates or fences. The city wants replacement gates to match the historic character of the property, which means period-appropriate steel frames and hardware. We handle that paperwork for you and make sure the gate passes design review the first time. In the city’s outer suburban subdivisions, permits are generally simpler but still required for electrical wiring and automated operators.
We start with materials that hold up in this climate: galvanized steel or aluminum frames, stainless steel hinges and fasteners, and powder-coating instead of wet paint. For slide gates, we use corrosion-resistant track hardware and seal the rack and pinion assembly. It costs a little more up front, but in Jacksonville’s humidity and salt air, hardware that rusts out in three years is more expensive than hardware that lasts twenty. We’d rather do it once.
Yes, and we do it regularly in Jacksonville’s older neighborhoods where shared driveways are common. We install gates with loop detectors or photocells positioned so the gate auto-opens when a vehicle approaches from either side, and we set the swing or slide path so neither address ever gets blocked. In a recent Riverside job, we installed a slide gate across a shared driveway where a swing gate would have blocked the neighbor’s parking. Both addresses stayed accessible through the whole install. That kind of planning is the only way to do shared driveway work.
We don’t leave you with a dead gate. If we’re installing a new gate and the existing operator fails during the job, we can repair or replace the operator on the same visit in most cases. Since many Jacksonville suburban HOAs use the same FAAC, Elite, or Linear operators installed in the late 1990s and early 2000s, we carry common parts for those systems. Your gate stays operational while we finish the install, and the operator replacement is quoted before any work is done. Call (877) 610-2993 for an exact quote, estimates are free.
Gates That Fit the Actual Jacksonville Driveway
Jacksonville isn’t like the rest of Florida. It’s the largest city by area in the lower 48, which means a gate on a Southside cul-de-sac off Gate Parkway faces entirely different conditions than a gate on an Avondale street from 1925. The soil here is sandy coastal plain that heaves. The air is salty well inland. The housing stock spans century-old historic homes and 20-year-old suburban tracts, and the automated gates from that suburban boom are aging out at the same moment.
In the riverside historic districts, gate installations often require preserving a 1920s wrought-iron frame while fitting new automation, because the replacement gate has to match the property’s historic character to pass local design review. That’s not something you’d run into in the newer subdivisions off Beach Boulevard or in the 32217 ZIP. It takes someone who’s done it before.
We also see a lot of double gates and slide gates going in where a single swing gate simply won’t fit. Tight setbacks, narrow rights of way, and driveways that two addresses share mean the gate has to slide, or split, or activate on a loop detector that doesn’t trap the neighbor. If you need a gate that lets both you and the family next door get in and out without a fight, we’ll build it so it keeps working for years, not months.
Call (877) 610-2993 for a free estimate. Hal’s name is on the shop and the shop is in this market. If you want to drive to the office and look him in the eye before you sign, he’ll be there.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Jacksonville since 2001.