Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irvine
Gate installation in Irvine usually costs between $2,800 and $9,500 depending on whether we’re hanging a single pedestrian gate or building a full automated double swing gate with access control. Most jobs in Irvine take one to three days once materials are on site. If you’re in Woodbridge, Northwood, Turtle Rock, or the Great Park Neighborhoods, we can usually have someone at your property within 24 hours to measure and price the job. Hal Gatewood has been running this outfit since 2001, and the phone number, (877) 610-2993, rings to a live person any hour of the day.
We know Irvine’s gates better than most because we’ve been correcting what other companies install here for over two decades. The HOA layer, the builder-grade hardware, the Santa Ana winds that show up every fall, the way UV chews through rubber seals in this dry inland climate. All of it changes how a gate should be installed. Off-the-shelf labor from outside the city misses those details, and that’s how you end up replacing an operator that should have lasted fifteen years.
Key Takeaways
- Typical gate installation in Irvine runs $2,800 to $9,500, with automation and access control adding $1,200 to $3,800.
- Irvine HOAs control materials, finishes, and even hardware brands. We handle the approval paperwork and match specs exactly.
- Newer Great Park Neighborhoods homes often lack low-voltage conduit at the gate location. We trench and retrofit it the right way.
- Every job gets our 90-Day Done Right Promise in writing, plus a live person answering the phone 24/7 at (877) 610-2993.
- We service Viking, Ghost Controls, DoorKing, and Elite operators, with parts stocked locally for faster turnaround in Irvine.
Why Gatewood Fence & Gate Is Irvine’s Preferred Gate Installation Company
Irvine homeowners call us because the name on the invoice is the same guy who shows up. Hal Gatewood started this company in 2001, and he still walks job sites, still welds on site, still gets irritated when he finds a gate post set in three inches of concrete by somebody who should have known better. Irvine’s neighborhoods are tight. Word travels through the Northwood and Turtle Rock Nextdoor groups and the HOA board meetings at Orchard Hills. When we do a job right, the neighbors hear about it. When a builder’s operator fails two years in, they call us to fix what should have been done correctly the first time.
We answer the phone around the clock. Not a voicemail, not a call center. Calling (877) 610-2993 at 2 a.m. because your security gate won’t close gets you a person who knows the difference between a DoorKing 9150 and an Elite SL3000. That matters when you have a gate stuck open and an HOA fine clock running. We also keep parts for the brands Irvine actually uses, Viking, Ghost Controls, DoorKing, Elite, on hand or a day away, which means your repair doesn’t stall while somebody waits on a backordered board from a distributor three states over.
Our crews are background-checked and uniformed, and they know Irvine’s HOA rules before they knock on the door. We’ve worked inside enough Irvine Company rental communities and enough single-family villages to know when a job needs written property management approval before we touch a hinge. That compliance step is real here, and it’s something a contractor from Santa Ana or Anaheim might not think to ask about until the work is already done and the property manager is unhappy.
Our Gate Installation Services in Irvine
We install and automate every type of residential and light commercial gate common in Irvine. Here’s what that looks like in practice. Our Gate Installation team handles everything from a simple side-yard pedestrian gate to a full community entrance with license-plate recognition.
Driveway Gate
Driveway gates in Irvine’s planned villages tend to be powder-coated aluminum or wrought iron, and the HOA usually has a spec sheet telling you exactly which finish and hardware you’re allowed to use. We pull that spec, match it, and build a gate that actually opens and closes smoothly ten years from now. A single driveway gate in Irvine typically runs $3,200 to $6,800 installed, depending on width and whether it’s automated.
Pedestrian Gate
Pedestrian gates in Irvine are usually simpler, but the HOA still cares about the finish. We install gates that match the existing powder coat so the side yard doesn’t look like an afterthought. A standard pedestrian gate in Irvine runs $900 to $2,400 installed, more if it needs a maglock or keypad entry tied into the community system.
Sliding Gate
Sliding gates are common in Irvine, especially on wider driveways and at rental community entrances. The big thing in Irvine is the track. Santa Ana winds push debris into slide tracks, and a track that wasn’t set level during the original install will bind within a year or two. We set tracks on proper footings and make sure the roller spacing matches the gate weight. Sliding gate installation in Irvine runs $4,500 to $9,500 with automation.
Swing Gate
Swing gates remain the most common residential style in Woodbridge, Northwood, and Turtle Rock. The failure point is almost always the hinge post. A gate sags in the hinge post, not in the middle, and that is where we start. We size the post footings for the actual gate weight, not the builder’s minimum spec. Double swing gate installation in Irvine runs $5,800 to $11,000, including operators and safety edges.
Security Gate
Security gates in Irvine increasingly include license-plate-recognition access control, especially in the Great Park Neighborhoods and at Irvine Company rental properties. That requires both mechanical gate skills and low-voltage programming knowledge. We do both in-house. A full security gate with LPR, keypad, and crash-rated posts in Irvine runs $9,000 to $18,000 depending on the spec the property manager or HOA requires.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irvine
We’re certified to work on nine major gate brands, but in Irvine we see a lot of Viking, Ghost Controls, DoorKing, and Elite hardware. These are the brands specified by Irvine HOAs and installed by builders, which means we stock common parts locally and can turn most repairs in a day or two instead of a week waiting on freight. If your gate has a Viking operator and the board fails, we likely have the replacement on the shelf or a day away. That speed matters when your gate is stuck open and the security of a whole community depends on fixing it fast.
Common Gate Installation Problems We See in Irvine Homes
Irvine’s housing stock has predictable failure modes. Here’s what we see most often when we’re called in after another company walked away:
- Builder-grade operators in Great Park Neighborhoods (92618) failing within two to three years. The original installers set undersized post footings and never accounted for the actual gate weight, so the operator burns out pulling a gate that’s slowly sagging. Fix the panel without the post and you’ll fix it twice.
- No low-voltage conduit at the gate location. Homeowners in Woodbridge and Northwood install a manual gate during construction, then realize there’s no power run for an operator, no conduit for a keypad, no loop for the safety photocell. After landscaping is done, that retrofit means trenching across a finished driveway. We do it cleanly, but it’s a cost that should have been avoided at build.
- Slide gate tracks binding after Santa Ana events. Villages like Turtle Rock get wind-blown debris packed into slide tracks every fall. The debris is the symptom. The cause is usually track alignment that was never corrected after installation. We clean the track and fix the alignment, so the operator stops tripping its clutch.
- HOA compliance stalls. Irvine is one of the largest master-planned cities in the country, and virtually every visible gate falls under HOA-governed specifications for material, color, finish, and hardware. We cannot begin visible repairs until written property management approval is in hand. We handle that process for you, but it’s a layer of complexity that doesn’t exist at the same scale in neighboring Santa Ana or Anaheim.
Pricing for Gate Installation in Irvine, CA
Here’s the honest math for Irvine. A basic pedestrian gate runs $900 to $2,400. A single swing driveway gate with one operator runs $3,200 to $6,800. A double swing gate with automation and safety edges runs $5,800 to $11,000. A sliding gate runs $4,500 to $9,500. Add access control, keypads, or license-plate recognition, and you’re adding $1,200 to $3,800 depending on the system. The price is quoted and agreed before any work starts. Never an estimate that changes at the door. Never a surprise line item. Call (877) 610-2993 and we’ll come measure, walk the HOA requirements with you, and put the number in writing. The quote is free, and you’ll get $40 off any job over $200.
| Service | Typical Irvine Price Range |
|---|---|
| Pedestrian gate | $900 - $2,400 |
| Single swing driveway gate (manual) | $1,800 - $3,800 |
| Single swing driveway gate (automated) | $3,200 - $6,800 |
| Double swing gate (automated) | $5,800 - $11,000 |
| Sliding gate (manual) | $2,800 - $5,500 |
| Sliding gate (automated) | $4,500 - $9,500 |
| Access control add-on | $1,200 - $3,800 |
| Security gate with LPR | $9,000 - $18,000 |
We Also Serve Cities Near Irvine
We cover Gate Installation in Irvine and the surrounding communities, including Tustin, Aliso Viejo, Santa Ana, and North Tustin. If you’re a few minutes outside Irvine proper, the same crew, the same pricing, and the same 90-Day Done Right Promise follow you. Scheduling is coordinated from our Los Angeles office, but the teams that show up at your door work Irvine locally and know the streets, the HOAs, and the gate hardware common to this part of Orange County.
Serving Irvine, CA - Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Irvine
Yes. In nearly all Irvine villages, including Woodbridge, Northwood, Turtle Rock, and Orchard Hills, the HOA must approve any visible change to gate hardware, finish, or automation before work begins. We handle the approval paperwork and can often get it turned around in a few days. Call (877) 610-2993 and we’ll tell you exactly what your specific HOA requires.
Builder-grade operators in the 92618 zip code fail early because they were installed on undersized post footings without accounting for gate weight. The post shifts, the gate sags, and the operator burns out pulling a gate that’s fighting the hinge. We correct the post, the footing, and the operator, so the gate opens like it should. Estimates are free.
Yes. We trench conduit across driveways and through landscaping to run power and low-voltage wiring for the operator, keypad, and safety photocell loop. It’s common in Woodbridge and Northwood, where manual gates went in during construction. We did it recently in Orchard Hills, trenching a new conduit run and integrating a LiftMaster LA500 where the builder had left nothing but a 120V stub-out. Call (877) 610-2993 for a free measure and a written price.
Irvine Company rental communities and newer Great Park developments increasingly require license-plate-recognition access control alongside traditional keypads and fob readers. We design and install those systems, which need both mechanical gate work and low-voltage programming. A full security gate package in Irvine runs $9,000 to $18,000. Call (877) 610-2993 to talk through the spec.
Yes. Fall Santa Ana events stress hinges and operators, blow debris into slide-gate tracks, and slam gates against their stops. Post-Santa Ana season is our busiest repair window in Irvine. If your newly installed gate suddenly binds or won’t close after a wind event, the wind usually exposed an install problem that was already there. Call (877) 610-2993 and we’ll find the real cause.
Call Gatewood Fence & Gate for Gate Installation in Irvine
If you need a gate installed, automated, or retrofitted in Irvine, call (877) 610-2993. Hal Gatewood’s name is on the shop and on every invoice, the address is published, and the license is there for anyone to look up. We quote the price before we start, we show up when we say we will, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. No fine print. One call, and you’ll get a live person, a straight answer, and a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irvine since 2001.