Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Huntington Station
Gate installation in Huntington Station usually runs $1,800 to $6,500 depending on the gate width, material, and whether you need an opener, and most jobs take one to three days on site. We know the drives off Depot Road, the side streets off Jericho Turnpike, and the tight lots where a 12-foot single swing gate makes more sense than a double. Our crew serves all of 11746 with real local knowledge, not a map app and a guess. If you need a gate quoted, measured, and installed right the first time, call (877) 610-2993.
Hal Gatewood started this shop in 2001 because he kept seeing gates installed loose, welded thin, and squared to nothing. That still bothers him. When you call about a gate in Huntington Station, you get Hal or one of his crew, not a phone tree. We show up when we say we will, price the job before we touch it, and stand behind the work with a written 90-Day Done Right Promise.
Key takeaways:
- Most Huntington Station gate installs run $1,800-$6,500, quoted upfront before work begins
- We weld on site, so your gate stays in the driveway, not hauled to some shop
- Same crew, same name on the invoice since 2001
- No trip charge inside the county, $40 off any repair over $200
Why Gatewood Fence & Gate Is Huntington Station’s Preferred Gate Installation Company
We have worked on enough postwar Cape Cods and ranches in Huntington Station to know what those properties throw at a gate installer. The lots are small, the driveways are tight, and half the existing gates were hung in the 1970s on posts that have since heaved out of square. Neighbors along Oakwood Road, Maplewood Road, and Route 110 talk, and they pass our name along. That is how a local company should work. Our reputation in this hamlet is built on showing up, welding it square, and backing it up in writing.
We answer the phone around the clock with a live person. No voicemail maze, no answering service in another time zone. If your gate will not close at 11 p.m. and you live in 11746, you will talk to someone who knows what a gate is, not someone reading a script. The name on the shop is Hal Gatewood. His address is published and his license number is easy to look up. That matters to the 50-to-70-year-old homeowner who already got burned by a national outfit once and will not let it happen again.
We also understand the code landscape in the Town of Huntington. That is not a small thing. More on that below, but know that we do not skip the permit question and we do not leave you holding an unpermitted opener that bites you at resale.
Our Gate Installation Services in Huntington Station
Every gate we install in Huntington Station starts with the post. A gate sags in the hinge post, not in the middle. We dig deeper footings than the original installers usually did, set the posts in concrete below the frost line, and square the frame before the first weld. Then we build or mount the gate to stay square.
Driveway Gate Installation
Most Huntington Station driveways feed a Cape Cod or split-level on a lot tight enough that a single swing makes more sense than a double. We measure the width, check the grade, and tell you honestly whether a swing or slide will hold up better on your specific driveway. A typical single driveway gate install here runs $1,800 to $4,200 without an opener.
Pedestrian Gate Installation
Side yards, walkways to the rear entrance, pool access, trash enclosures. We build and hang pedestrian gates to match the driveway gate, matching steel gauge and rack style so the whole property looks like it belongs together. Most pedestrian gate installs in Huntington Station run $400 to $1,200 depending on width and hardware.
Sliding Gate Installation
Where the driveway has a steep grade change just inside the fence line, a swing gate will drag or bind. We see that on several Huntington Station side streets where the house sits higher than the road and the driveway drops. A sliding gate rides on a rail or uses a cantilever design and shrugs off the grade. Slide installs start around $2,800 and climb with opener and track work.
Swing Gate Installation
Swing gates remain the most common choice in Huntington Station, partly because they suit the older neighborhood character and partly because they cost less to install well than a slide. But freeze-thaw heave in the sandy-loam soil tilts hinge posts over the years, and that is where cheap installations fail. We set posts four feet deep, below the frost line, and weld hinge brackets that will not twist. A properly installed double swing gate without an opener runs $2,500 to $6,500 here, depending on steel thickness and finish.
For broader context on materials and styles, our Gate Installation hub page covers the full range of what we build and install.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Huntington Station
We are certified to service and install nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters in Huntington Station because the parts you need on a Tuesday afternoon are not things you want to wait a week for. We keep common hinge kits, operator boards, remotes, and safety edges in stock and on the truck. When we say we can do the job, we mean this week, not after a backorder. If you already have an opener or a brand preference, call us and we will tell you straight whether it makes sense to reuse it or replace it. We do not swap parts that do not need swapping.
Common Gate Installation Problems We See in Huntington Station Homes
We see the same failures across the hamlet, house after house. Here are the ones that cost homeowners the most when they go ignored:
- Heaved hinge posts on swing gates. Suffolk County ground frost from December through March works on sandy-loam soil and tilts posts out of plumb. The gate drags, the latch misses, and the opener strains until it burns out. We set new footings below the frost line and re-square the gate to match.
- Rust at the welds and hinge pins. Long Island air, even this far inland, is humid and salt-tinged. Original galvanizing fails first at the weld points. By the time the hinge snaps, the gate has been weak for years. We grind the old weld, re-weld to solid steel, and seal it properly.
- Unpermitted solar openers without safety edges. On the rural-side acreage around Huntington Station we find solar gate openers installed years ago with no photocells and no reversing edges. That is an entrapment risk, and around livestock it is worse. We bring those installations up to code while we do the install.
- Double gates that were never tuned as a pair. The slave leaf opens slower, the master drags, or the whole thing binds against the driveway grade. Fix the panel without the post and you will fix it twice. We tune both leaves as a system, not as two separate doors.
The thread in all of these is the same: original 1960s and 1970s hardware on a 2020s lot. Huntington Station’s housing stock is full of galvanized chain-link and ornamental wrought-iron gates that are 40 to 60 years old and failing at the welds. Our repair-first philosophy fits this hamlet. We restore what is worth restoring and replace only what cannot be saved.
Pricing for Gate Installation in Huntington Station, NY
A single swing gate without an opener on a standard Huntington Station driveway runs $1,800 to $4,200 installed. A double swing gate runs $2,500 to $6,500. Add a solar opener and a keypad entry and you are generally looking at $3,800 to $8,500 all in, depending on gate weight and operator duty. Pedestrian gates run $400 to $1,200. Sliding gates start around $2,800 and climb from there. Those are real numbers for this market, not bait. The price we quote is the price you pay, and it is agreed before we start any work.
You will get a written estimate with the work broken down line by line. No surprise add-ons at the end. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Huntington Station
If you are in South Huntington, Greenlawn, East Northport, or Elwood, we work those neighborhoods regularly and carry the same up-front pricing and 90-Day Done Right Promise across the area. For a fuller picture of our local service area, see our Gate Installation in Huntington Station page. You will get the same crew and the same name on the invoice.
Serving Huntington Station, NY - Our Local Coverage Area
We’re based in the Huntington Station area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Huntington Station
Yes. On a long driveway where trenching the mains would mean 300 to 400 feet of conduit, we install solar arrays with a deep-cycle battery and a heavy-duty operator sized for the gate’s weight. We did exactly that on a rural driveway off Depot Road where the mains would have required a 400-foot trench. The homeowner runs his gate off solar and a 35Ah battery with a keypad entry from his pickup and a loop detector so he exits without stopping. Call (877) 610-2993 for a site visit.
Yes, the Town of Huntington requires permits for fence and gate structures, and an automated opener without a permit is a code liability that catches up to homeowners at resale or when a neighbor complains. We flag that early and walk you through the permit process on the install side. We have seen unpermitted solar openers on acreage around the hamlet with no safety edges and no photocells, and we correct those while we work.
First we check the hinge posts. Freeze-thaw heave in sandy-loam soil tilts them out of plumb, and that is where the sag starts. We sink a new footing below the frost line, re-set the post, then square both leaves and tune the rack and pinion on the slave gate so the pair opens and closes as one. On one rural job off Depot Road we corrected exactly that on a pair of 14-foot farm gates. Call (877) 610-2993 and we will diagnose it on site.
Yes. We can build a new galvanized chain-link swing gate on the same footprint, with the same post-to-post span and the same rack style, so it reads as a match to the fence line. If the posts and frame are still solid, we may be able to grind and re-weld the rusted hinge points and restore the gate instead of replacing it. That is a $400 to $900 repair versus a $1,800 to $3,500 install, so we will tell you honestly which one your gate actually needs.
At minimum, a reversing edge and a set of monitored photocells so the gate stops and reverses on any obstruction, including an animal. On acreage we also recommend a loop detector for exit and a keypad or remote for entry. We install all of those on every new opener, including solar setups. Never run an older opener without photocells, and do not let anyone install one without them.
Call (877) 610-2993 for a free estimate on any gate installation in Huntington Station. Hal Gatewood’s name is on the shop, and the shop is down the road. We answer the phone live, every time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Huntington Station since 2001.