Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hampton
A new gate installation in Hampton typically runs $2,800 to $9,500 for a standard automated driveway gate, and $1,200 to $4,800 for a pedestrian gate, depending on the ironwork, operator, and the condition of the ground it stands on. Most Hampton jobs take one to three days on site after the posts are set, and we quote the full price before anything gets ordered. Hal Gatewood has been doing this work since 2001, and the person who measures your driveway is the same person who stands behind the finished gate.
We know Hampton because we’re down the road. Our shop is in Baltimore County, and we’re in Hampton’s ZIP 21286 regularly. Call (877) 610-2993 and a live person picks up, any hour. We’ll set a time to measure, walk you through the options that actually match your house, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Hampton’s Preferred Gate Installation Company
Hampton isn’t a place where you hang a stock chain-link gate and call it done. The homes on Dulaney Valley Road and the side streets off Hampton Lane are mid-century colonials, Cape Cods, and estate properties with real setbacks and long driveways. A gate here has to look like it belongs with the house, not like someone bolted on an afterthought. That’s the work we do.
Hal’s name is on the shop, and the shop is down the road - that is the oldest accountability there is. We’re licensed, insured, and our address is published where anyone can look it up. Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround.
You’ll also get a live person on the phone, 24/7. Not a voicemail, not a queue. When a gate motor dies at 9:45 on a Sunday night and the gate is stuck open, you want a real voice. You get one. And while we can’t promise same-day on a new installation - that work is measured, ordered, and scheduled properly - we can promise a free measure and a written price within days of your call.
The person who shows up to your Hampton door is background-checked and uniformed. Not a rotating cast. You’ll see the same face at the hardware store. That matters up here.
Our Gate Installation Services in Hampton
Hampton’s housing stock runs heavy toward custom ornamental ironwork, and that’s where we spend most of our time. Here’s what we install most often in Hampton, and what each one really involves.
Driveway Gate
A driveway gate in Hampton is usually a statement piece, not a security afterthought. We build and install gates matched to the house - often ornamental iron with scroll, spear-tip, or finial details that echo the period of the home. On a 1960s colonial on a tree-lined street in Hampton, we installed a custom ornamental swing gate with scroll and spear-tip details. The existing operator was a 20-year-old LiftMaster unit that had been binding because frost heave had pushed the hinge post out of plumb. We set new concrete post footings below the frost line, replaced the hinge post, and mounted a new LiftMaster operator with safety photocells. The gate now swings silently and latches reliably even after hard freezes. That’s the difference between patching and installing for Hampton soil.
Typical driveway gate installation in Hampton runs $3,200 to $9,500, including posts, hinges, operator, and the gate itself. Call (877) 610-2993 for a free measure.
Pedestrian Gate
Pedestrian gates in Hampton often match a driveway gate that’s been there for decades, or they’re the first phase of a larger entry project. We match the existing ironwork - same picket spacing, same spear pattern, same finish - so the new gate doesn’t look like an add-on. Most Hampton pedestrian gates run $1,200 to $4,800 depending on size and detailing.
Sliding Gate
Some Hampton properties on steeper grades or with tighter driveway curves need a sliding gate instead of a swing. Sliding gates ride on a track and carry their own weight through roller trucks, which means the post alignment has to be dead-on. With Hampton’s clay-heavy soil and freeze-thaw cycles, we set sliding gate posts below the frost line and backfill with gravel so the track stays true year after year. A sliding gate in Hampton generally runs $3,800 to $9,000, depending on length and motor.
Swing Gate
Swing gates are the most common gate type in Hampton because they match the character of the homes. A heavy ornamental swing gate needs an operator sized for its weight and wind load, and it needs hinge posts that won’t move. We see older Hampton gates where frost heave has shifted the hinge post a half inch, and that half inch makes the gate bind and strain the motor. We fix the post problem at the root rather than bolting on a bigger motor to force it. Swing gate installation in Hampton typically costs $2,800 to $8,500.
We also handle Gate Installation for double gates, security gates, and custom fabricated pieces. If it’s metal and it moves, we’ve built it or fixed it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hampton
We’re certified to service nine major gate brands, and we keep common parts for Hampton jobs on the truck: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On heavy ornamental gates - the kind you find all over Hampton - FAAC and BFT operators handle the weight well, and Linear makes solid swing-gate arms for mid-weight panels. We match the operator to the gate’s actual weight and position it so the motor isn’t fighting the panel. If the brand you had isn’t on our list, we’ll tell you straight what needs to change and why. No upsell, just what the gate actually needs.
Common Gate Installation Problems We See in Hampton Homes
- Frost heave pushing hinge posts out of plumb. Hampton sits on clay-heavy soil, and Baltimore County gets dozens of freeze-thaw cycles every winter. The ground swells and contracts, and over a few seasons it shifts gate posts just enough that the gate binds, drags, or won’t latch. The fix is setting new footings below the frost line, not shimming the hinge.
- Rust through at the post base and panel joints. Summer humidity and afternoon thunderstorms in Hampton accelerate surface rust on ornamental iron, and salt-laden runoff from winter road treatment eats at the post footing connection. We see original 1950s and 1960s ironwork where the post looks solid from the top but is nearly gone at grade level. That’s a welding and fabrication job, not a touch-up.
- Operators burned out from fighting a misaligned gate. A heavy estate gate that’s sagging or out of plumb adds resistance to the operator every cycle. Eventually the motor gives out - not because the motor was cheap, but because the gate was dragging. We fix the panel and post alignment first, then install the right operator for the weight.
- Ornamental details replaced with off-the-shelf parts. Many Hampton gates carry scroll, spear-tip, and finial work that generic installers can’t match, so they swap in standard panels that look wrong the day they’re installed. We weld and fabricate on site to match the existing style. The Hampton National Historic Site shaped this whole community’s eye for period ironwork, and we respect it.
Pricing for Gate Installation in Hampton, MD
Here’s what gate installation actually costs in Hampton, in real numbers, not “it depends” language.
| Gate Type | Typical Hampton Cost Range |
|---|---|
| Pedestrian gate, standard arch or flat top | $1,200 - $2,600 |
| Pedestrian gate, ornamental with spear-tip or scroll | $2,800 - $4,800 |
| Driveway swing gate, single panel, basic operator | $2,800 - $5,000 |
| Driveway swing gate, double ornate panels, heavy operator | $5,500 - $9,500 |
| Sliding driveway gate with track and motor | $3,800 - $9,000 |
| Security gate with intercom and camera entry | $6,000 - $14,000 |
What moves the number: panel weight and detailing, whether the posts are being replaced, whether power needs to be run to the gate, and whether the existing driveway or landscape needs modification. You’ll get one price, in writing, before any work begins. We don’t change the number at the door. Standing offers apply to Hampton customers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Estimates are free - call (877) 610-2993 and we’ll come measure.
We Also Serve Cities Near Hampton
Most of our gate work concentrates in Hampton and the surrounding Baltimore County communities. We regularly install and repair gates in Towson, Lutherville-Timonium, Timonium, and Carney, and because we’re local to the county, the same crew and the same pricing follow you. No matter which of these neighborhoods you call from, the person who answers is the person who’ll show up.
Serving Hampton, MD - Our Local Coverage Area
We’re based in the Hampton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hampton
Because the soil moves. Hampton’s clay-heavy ground absorbs winter moisture, freezes, and swells - then thaws and contracts in spring. That cycle, repeated dozens of times each winter, pushes gate posts out of plumb by small amounts every year. If the previous repair only adjusted the hinges or the operator arm without resetting the post footing below the frost line, the gate will drift again within a season. The permanent fix is digging out the old footing, setting new concrete below frost depth, and re-hanging the panel from a post that can’t move. Call (877) 610-2993 and we’ll tell you whether your post is truly below the frost line, which you can’t see from the surface.
Yes. We weld and fabricate on site, so a new panel or section gets the same picket profile, the same scroll work, and the same spear-tip or finial detailing as the original. Most Hampton gates from the 1950s, 60s, and 70s were built with decorative ironwork that no off-the-shelf panel can match. We match it in the driveway, not in a catalog. Bring us a photo or the original panel, and Hal will tell you exactly what’s involved and what it costs before you commit.
Yes, on almost any automated driveway gate in Hampton we recommend installing a loop detector in the driveway surface. A loop detector senses a vehicle above it and holds the gate open or triggers it to close only after the car has cleared the swing path. That’s especially important on Hampton’s longer, curved driveways where a vehicle can sit partly in the gate’s arc. It costs more up front but prevents the gate from closing on a car door or bumper, which ruins a panel fast. We include loop detector options in every Hampton driveway gate quote.
For a heavy ornamental swing gate in Hampton, we generally recommend a ram-style or articulated-arm operator sized above the panel’s actual weight, typically from FAAC or BFT. The gate’s weight, height, and wind exposure matter more than the brand name, and a Hampton gate with solid iron panels and decorative scrollwork catches more wind than a simple tube gate. Undersizing the operator is the most expensive mistake we see because the motor burns out fighting the load. We measure the panel, calculate its actual swing load, and then pick the operator. Call (877) 610-2993 and we’ll spec it correctly the first time.
Sometimes, yes. If we’re installing a sliding security gate, the driveway needs a level track bed and enough straight run beside the opening for the panel to retract fully. If we’re adding an automated swing gate, we may need to re-grade or trim back landscape that sits inside the panel’s swing arc. Hampton’s older properties often have mature plantings right at the driveway edge, and we’ll tell you during the measure exactly what has to move and what can stay. You’ll know before we start, in writing.
Get a Free Estimate for Your Hampton Gate Installation
If you live in Hampton and you’re thinking about a new driveway gate, a matched pedestrian gate, or a security gate, call us at (877) 610-2993. We’ll come out, measure, and give you a written price. Free estimate, no trip charge inside the county, and the price we quote is the price you pay. Hal Gatewood has been doing this since 2001, and the name is on the shop. You’ll talk to a person, not a recording.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hampton since our founding in 2001.