Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Fort Myers Shores, FL
Gate repair in Fort Myers Shores usually comes down to three things: a rusted hinge, a failing motor, or a post that has rotted at grade. If your gate is sagging, scraping the driveway, or refusing to open, we can almost always fix it on-site without hauling it away. Call (877) 610-2993 and you’ll reach a live person, not a voicemail, whether it’s noon or close to midnight.
Why Fort Myers Shores Homes Are Different
Fort Myers Shores sits squarely in the bull’s-eye of Hurricane Ian’s 2022 landfall destruction zone. A large share of the repair calls we run here involve gates installed quickly in late 2022 or early 2023, often by unlicensed labor brought in to clear insurance-claim backlogs. Lee County’s permitting office has flagged some of those installations, and we routinely find improperly sized hinges, non-compliant motor mounts, and posts that were never set deep enough to begin with. A repair can’t hold on a gate that was wrong from day one, so our first step is often correcting that foundation before we touch the failing part.
Then there’s the water. Fort Myers Shores has a dense network of Orange River-adjacent canals that hold salt-laden humidity against metal surfaces twelve months a year. Steel hinges, strike plates, latch boxes, and automatic operator internals oxidize here noticeably faster than in inland Lee County neighborhoods. Homes here were built primarily between the 1960s and 1980s, and the original gate hardware from that era is heavily rusted and often paired with aging wooden posts that have rotted at grade. When you work gates in this community, you learn fast: stainless and powder-coated aluminum are the floor, not an upgrade.
Gate Repair in Fort Myers Shores
Gate repair in Fort Myers Shores typically runs $180 to $340 for hinge and post work, and $260 to $480 for electric operator repairs. Most jobs get handled in a single visit. We carry common wear parts on the truck, so we’re not ordering from a warehouse while your driveway stays open. Hal Gatewood has been fixing gates since 2001, and the person who answers your call is connected to the same operation that shows up at your door in the 33905 zip. Gate Repair in this area means dealing with salt air, post-Ian shortcuts, and original hardware that has been in the Florida humidity for 40 or 50 years.
Electric Gate Repair
Electric gate repair in Fort Myers Shores means dealing with what the canal air does to control boards, limit switches, and loop detectors. The humidity off the Orange River gets inside operator housings and corrodes terminals faster than you’d expect. We stock parts for the brands you already have, and we test the entire circuit before we call it done. A gate that opens halfway and reverses is usually a limit switch problem, not a dead motor. If your opener went in during the post-Ian rush, we check the mount and the wiring before we assume the motor is bad. Electric operator repair here lands between $260 and $480 for boards, limit switches, and actuator work.
Automatic Gate Repair
Automatic gate repair in Fort Myers Shores is a different animal than it is inland. Salt-laden humidity from the canal system accelerates corrosion on actuator arms, photoelectric sensors, and keypad contacts. A gate that worked in November can short out by March. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we carry the common wear parts on the truck. In Fort Myers Shores specifically, we also see a lot of post-Ian installations where the motor mount was never properly sized, and the opener is already pulling loose from the post. Full motor replacement on a swing or slide gate runs $700 to $1,400 depending on brand and horsepower.
Hinge & Post Repair
In Fort Myers Shores, hinge and post repair is the bread and butter. A gate sags in the hinge post, not in the middle, and that’s where we start. The original homes here were built mostly from the 1960s through the 1980s, and the original gate hardware is heavily rusted, often paired with wooden posts that have rotted at grade. Throw in the canal air and you have a recipe for a gate that scrapes the driveway on one side and swings loose on the other. Hinge and post repair typically runs $180 to $340 depending on how far the post has rotted and whether we need to pull the old footing.
Gate Realignment
Gate realignment in Fort Myers Shores often follows the same story. Wind loading from summer storms, shifting post footings, and rusted hinge barrels all throw a gate out of square. We re-level the leaf, reseat the posts if needed, and adjust the latch and strike so the gate closes flush and latches under its own weight. A gate that won’t latch in a hurricane is a problem you don’t want to discover in September. Realignment usually runs $150 to $250 when the posts are still sound.
Does my Fort Myers Shores HOA need to approve a hinge replacement?
In many Fort Myers Shores communities, yes, even a hinge replacement can require approval if the management company has architectural guidelines covering gate style, height, or finish. We document the existing gate condition and specify that the repair restores the original look, which speeds approval along. Call (877) 610-2993 and we’ll help you figure out whether your community requires sign-off.
My post-Ian gate is already sagging. Why is it failing so fast?
Because the post was likely set into the original footing without rot treatment, or the footing itself was compromised and got buried instead of replaced. Canal humidity accelerates any weakness at grade, so you see failure within months. The fix is a new footing, a pressure-treated post with stainless brackets, and a square rehang. Call (877) 610-2993 for a free estimate.
Gate Installation in Fort Myers Shores
A new driveway gate in Fort Myers Shores typically runs $2,800 to $7,400 installed, depending on gate style, material, and operator. Most jobs take one to two days once materials are on site, and we always hand you a written price before we cut a single post hole. If you’re off Palm Beach Boulevard or tucked into one of the canal-side streets near the Orange River, call (877) 610-2993 and we’ll come out, measure, and give you a number you can hold us to. Gate Installation here means working with tight lot lines, shared driveways, and hardware that has to survive salt air.
Sliding Gate
Sliding gates are the workhorse in Fort Myers Shores, and for a specific reason: shared driveways. A lot of properties north of Palm Beach Boulevard have rights of way that a swing gate would block. A slide gate keeps the neighbor’s access clear and your property secure. We install cantilever and rail-style sliding gates with stainless hardware and rack systems rated for coastal grit. A slide gate with an operator starts around $4,400 and goes up to $7,400 or more for a custom cantilever with safety photocells.
Driveway Gate
A driveway gate in Fort Myers Shores does two jobs: it keeps the street out and keeps the salt air from eating whatever you hang on it. We build and install steel, aluminum, and welded custom driveway gates sized to your opening. Most homes here were built between the 1960s and 1980s, so the original posts are often rotted at grade. We replace the post, not just the panel, because a gate sags in the hinge post, not in the middle. A standard residential driveway gate, steel or aluminum, runs $2,800 to $5,400 installed.
Pedestrian Gate
Canal-front lots in Fort Myers Shores often have a separate walk gate next to the driveway gate, and it’s the one that sees daily use. We install standalone pedestrian gates with proper hinges, self-closing hardware, and latches that won’t fuse shut from salt corrosion. We’ll match the walk gate to your driveway gate and mount hardware that keeps working after a storm, not just on a sunny day. A single pedestrian gate installed typically runs $800 to $1,900.
Does my shared driveway rule out a swing gate in Fort Myers Shores?
Usually yes. If your driveway shares a right of way with a neighbor, a swing gate will arc into their access path, which violates clear-access requirements and creates a dispute before the gate is even finished. A sliding gate keeps the shared driveway open. Call (877) 610-2993 and we’ll look at your frontage and tell you straight.
What if my post-Ian gate was installed without a permit?
Get it inspected and corrected. Lee County’s permitting office has flagged a number of post-Ian installations in Fort Myers Shores for non-compliant motor mounts and improperly sized hinges. If yours hasn’t been caught yet, it likely will be at resale. We assess the gate against Lee County requirements, pull the permit if needed, and bring it up to code. Call (877) 610-2993 for an exact quote.
Gate Motor & Opener in Fort Myers Shores
Gate motor repair in Fort Myers Shores usually runs $240 to $460, and most jobs are completed the same visit. We’ve been fixing gates here long enough to know the canal-side salt air eats operator internals faster than anything inland, and that a lot of the post-Ian rush jobs are already failing. Hal Gatewood runs this company. His name is on the shop and on every invoice, and a live person answers when you call (877) 610-2993. Gate Motor & Opener work here means diagnosing corrosion, correcting bad mounts, and keeping slide gates gliding on tight lots.
Motor Installation
A new gate motor installation in Fort Myers Shores typically runs $1,100 to $2,600 depending on gate length, weight, and whether power is already at the post. Many canal-front properties have no electrical run, so battery backup and solar charging come into play. We install the operator with stainless hardware and corrosion-resistant brackets. We also make sure the gate is properly balanced before the motor ever goes on, because a motor installed on a dragging gate fails early.
Motor Repair
Motor repair in Fort Myers Shores is our most common call. We replace circuit boards, capacitors, limit switches, and seized gearboxes. We also do on-site welding so the gate stays in your driveway instead of getting hauled off to a shop across the county. A sagging gate is often the real culprit behind a burned-out motor, so we check the hinge post before we ever crack open the operator. Most motor repairs land between $240 and $460; full replacement runs $750 to $1,800 depending on brand and gate weight.
Slide Motor
Slide gates dominate Fort Myers Shores because so many properties have restricted working space. A swing gate needs room to arc, and a lot of canal-front lots simply don’t have it. Slide motors take the abuse of salt-laden air differently than swing motors: rack and pinion teeth corrode, drive chains stretch, and carrier wheels seize. We replace racks, re-pour post footings with stainless hardware, and realign track systems. Slide motor rebuilds, including new rack, carrier wheels, and track realignment, typically land between $1,100 and $2,400.
Why does my Fort Myers Shores gate motor corrode so much faster than inland?
Because Fort Myers Shores sits on a network of Orange River-adjacent canals that trap salt-laden humidity against metal surfaces year-round. We see slide motor internals, hinge posts, and rack teeth rust out here in two years when the same part lasts seven or eight inland. Stainless hardware and corrosion-resistant brackets are the fix, not an upgrade. Call (877) 610-2993 and we’ll show you what your gate needs.
Can you correct a post-Ian motor mount that’s already failing?
Yes, we correct post-Ian rush jobs all over Fort Myers Shores. We pull the operator, re-pour the post footing if needed, install stainless bolts and a properly sized bracket, then remount and realign the motor. If the original installer cut corners on the rack or the loop detector, we fix those too. Call (877) 610-2993 for a written price before we touch anything.
Gate Access Control in Fort Myers Shores
Gate access control in Fort Myers Shores comes down to three things: hardware that can handle canal-side salt air, operators with enough muscle for wide driveway and acreage gates, and a tech who knows which post-Ian installations were done right and which were rushed. A typical keypad or remote service call runs $145 to $240, and most repairs are done the same day. If your gate won’t open, won’t close, or the keypad quit after the last storm, call (877) 610-2993. Gate Access Control work here means sealing connections against humidity and programming systems that hold up year-round.
Keypad Entry
Keypads are the most common access control we service in Fort Myers Shores, and they fail here faster than inland because salt-laden humidity works into the wiring and contacts. We replace corroded keypads, rewire weathered connections, and program codes on site. If your keypad works sometimes and not others, it’s usually corrosion on the wiring terminals inside the housing, not the keypad itself. A new keypad install typically runs $185 to $320, including programming.
Remote Control
Remote control systems on Fort Myers Shores gates get a workout, especially on canal-front properties where the gate sits between the house and the water. When a remote stops working, we check the receiver, the antenna placement, and the operator board before touching the remote itself. We carry remotes and receivers for FAAC, Linear, and BFT systems on the truck. Programming a new remote runs $95 to $150, and receiver replacement is typically $220 to $340.
Phone Entry
Phone entry systems let you buzz visitors in from your cell phone, and they’re growing in Fort Myers Shores because so many lots have long driveways where a hardwired intercom would cost a fortune to trench. We install and service phone entry units that work through your existing gate operator. A phone entry add-on runs $450 to $800, depending on whether you want a basic two-way call unit or a cellular-based system that works without a landline.
Do I need entrapment protection on my automatic gate in Fort Myers Shores?
Yes, Florida building code requires entrapment protection on any automatic gate, and Fort Myers Shores is no exception. That means safety photocells, a reverse mechanism, and a properly adjusted loop detector. If your gate closes on an obstruction and doesn’t reverse, you have a safety problem. We check entrapment protection on every operator we touch. Call (877) 610-2993 to schedule an inspection.
Why does my keypad work sometimes and not others?
In Fort Myers Shores, intermittent keypad failure is almost always corrosion on the wiring terminals inside the housing. Canal humidity gets in, the contacts oxidize, and the signal degrades. We open the housing, clean or replace the terminals, and seal it against moisture. If the keypad itself is shot, replacement runs $185 to $320 including programming. Call (877) 610-2993 and we’ll diagnose it on site.
Gate Parts & Welding in Fort Myers Shores
Gate parts and welding in Fort Myers Shores usually means one of three things: a hinge rusted through to the point of failure, a post that’s given up in saturated canal-side soil, or a gate that was rehung too fast after Hurricane Ian and is now dragging, squealing, or swinging crooked. Most of it can be fixed on-site, in your driveway, the same day we arrive, without hauling the gate back to a shop. Call (877) 610-2993 and tell us what broke. Gate Parts & Welding work here means stainless hardware, deeper footings, and welds that hold in salt air.
Hinge Replacement
Hinges in Fort Myers Shores take a beating from salt-laden humidity that hangs over the canal grid year-round. We replace rusted hinge pins, worn barrels, and stress-cracked hinge plates with stainless or powder-coated aluminum hardware sized for the gate’s actual weight, not whatever came off the shelf. Incorrectly sized hinges are the number one cause of sag and drag, and we see a lot of that on post-Ian installs in the 33905 area. Hinge replacement here runs $180 to $360 depending on gate size.
Post Replacement
Fort Myers Shores sits on saturated, often sandy soil, and after heavy hurricane rains, post footings can lose bearing and rotate. We pull the old post, dig a deeper footing, and set the new post in properly compacted concrete, then weld fresh hinge plates or brackets onto the gate panel before rehanging. We rehung a canal-front swing gate after the hinge post rotated in saturated ground: the original posts had rotted at grade and the gate was dragging. Post replacement with a new concrete footing runs $300 to $640.
Rail Repair
Wind load on solid infill gates is a genuine problem in Fort Myers Shores, especially during tropical storm gusts that push hard against a closed gate. Bowed top rails, cracked middle rails, and bent bottom rails are all common. If left alone, a bent rail will eventually pull the gate out of square and strain the operator. We straighten or replace rails, weld cracked tubing, and reinforce corners where wind stress concentrates. Rail repair here runs $160 to $380 on most residential gates.
Custom Welding
Some gates aren’t worth scrapping. If the frame is solid but a hinge plate has torn loose, or you need a custom latch mount for an older 1970s gate, we weld on-site in Fort Myers Shores. We fabricate replacement brackets, weld gate panels back to their frames, and reinforce stress points that factory welds missed. On-site welding keeps the gate in your driveway, which means no trailer rental, no crane, and no week-long wait. Custom welding jobs start around $240 and go up based on material and time.
Why do gate hinges rust so fast in Fort Myers Shores compared to inland Lee County?
The Orange River canal grid traps salt-laden humidity against metal surfaces year-round, which attacks steel hinges, pins, and latch hardware much faster than inland. Zinc-plated hardware that lasts a decade in Lehigh Acres will show serious rust in Fort Myers Shores within three to five years. That’s why stainless or powder-coated aluminum is the standard here, not an upgrade. Call (877) 610-2993 for an honest assessment.
What fails first on a solid infill gate in Fort Myers Shores wind?
The rails bend first, usually the top rail under wind load during tropical storm gusts. After that, the hinge plates twist, and finally the operator gears strip when the gate binds mid-cycle. We see this pattern over and over on solid infill gates, especially those facing east or west where storm winds hit the flat face directly. Repairing the rail early, before the operator fails, usually saves the whole gate. Call (877) 610-2993 and we’ll come take a look.
Brands We Service in Fort Myers Shores
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common wear parts locally so a repair isn’t waiting on a freight truck from out of state. See our brands for the full picture.
Pricing for Gate Repair in Fort Myers Shores, FL
Here are honest ranges for the work we do in the 33905 market, not national averages. Every number below is quoted and agreed before we start.
| Service | Typical range in Fort Myers Shores |
|---|---|
| Hinge or latch replacement | $140 - $260 |
| On-site welding repair | $180 - $340 |
| Gate re-hang and adjustment | $220 - $420 |
| Operator/motor diagnosis and repair | $190 - $450 |
| Electric gate operator repair | $260 - $480 |
| Full motor replacement | $700 - $1,400 |
| Gate realignment | $150 - $250 |
| Post replacement with new footing | $300 - $640 |
| Driveway gate installation | $2,800 - $7,400 |
| Pedestrian gate installation | $800 - $1,900 |
| Keypad replacement | $185 - $320 |
| Remote programming | $95 - $150 |
What pushes a price up in Fort Myers Shores is usually a rotted post, a post-Ian mount that has to be corrected, or hardware that has to be ordered in stainless because the canal air ate the original. The price you get is the price you pay. We write it down before we touch a bolt, and we honor that number.
Neighborhoods We Serve in Fort Myers Shores
We work the whole 33905 area. The neighborhoods below are the ones we’re on most often, but if your street isn’t listed, call anyway. Most repair calls in Fort Myers Shores get same-day or next-morning service, depending on when you call and whether a part has to be ordered.
- Buena Vista Boulevard corridor
- Marinette Canal area
- Orange River-adjacent lots
- Palm Beach Boulevard corridor
- Buckingham Road side streets
Service Area - Cities Near Fort Myers Shores
While Fort Myers Shores is our primary service area, we also work in Gateway, FL, North Fort Myers, FL, Lehigh Acres, FL, Fort Myers, FL, and Villas, FL. Dispatch and scheduling are coordinated from our Miami office; crews serve Fort Myers Shores locally. If you’re unsure whether your property is inside our coverage area, call (877) 610-2993 and a live person will tell you straight.
Serving Fort Myers Shores, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Fort Myers Shores and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Fort Myers Shores coverage area; if your address is on it, we can help.
Also serving nearby: Fort Myers Shores, FL, Gateway, FL, North Fort Myers, FL, Lehigh Acres, FL, Fort Myers, FL, Villas, FL.
FAQs About Gate Repair in Fort Myers Shores
Most repair calls in Fort Myers Shores get same-day or next-morning service, depending on when you call and whether a specific part has to be ordered. We carry common wear parts on the truck, so most days we can handle it in one visit. Call (877) 610-2993 as early as you can and we’ll give you a straight answer.
Yes, we see them all over Fort Myers Shores. We assess the gate against Lee County requirements, correct undersized hinges or non-compliant motor mounts, and pull a permit if needed. The goal is to make the gate safe and code-compliant so it holds. Call (877) 610-2993 for a written estimate.
A live person answers your call, schedules a window, and shows up in that window. We diagnose the gate, write down a price, and you approve it before we start work. Most repairs are done in a single visit. Every job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993 and we’ll get you on the schedule.
If your gate is sagging, dragging, or refusing to open in Fort Myers Shores, don’t let it turn into a bigger problem. Call (877) 610-2993 for a free estimate. Hal Gatewood’s name is on the shop, and a live person answers around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Myers Shores Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly