Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fairfax Station
A new driveway gate in Fairfax Station typically runs $4,800 to $14,500 installed, depending on the gate’s width, material, and operator. Most projects take two to four weeks from measurement to final walkthrough because we order custom steel to fit exact post spacing rather than forcing a stock panel onto your driveway. If you’re calling around for gate installation in Fairfax Station, call (877) 610-2993. We’ll answer with a live person, schedule a free measure, and give you a written price before any work starts.
Fairfax Station isn’t a place where you want a rushed install. The drives are long, the lots are wooded, and plenty of the homes are custom-built with architectural details a stock gate would fight. Our crews know the roads here, the way the clay soil holds water, and where the older estate systems are starting to fail. That local knowledge means the gate you get is the gate that actually fits your property.
Why Gatewood Fence & Gate Is Fairfax Station’s Preferred Gate Installation Company
Hal Gatewood has owned and run Gatewood Fence & Gate since 2001. His name is on the shop, his address is published, and his license number is there for anyone who wants to check it. That matters to people in Fairfax Station because you’re not looking for the cheapest bid. You’re looking for someone who will show up, do it right, and still be reachable if something shifts a year later.
A live person answers our phone 24 hours a day, seven days a week. No voicemail during dinner. No dispatch queue. If a storm drops a branch on your gate track at midnight, you’ll talk to someone who knows what you’re describing. We also bring on-site welding to every Fairfax Station job, which means a custom ornamental gate or a sagging hinge post gets repaired in your driveway instead of hauled to some distant shop.
Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. That’s not a warranty buried in a PDF. It’s stamped on your invoice. And for Fairfax Station homeowners who have been burned by a national company quoting one number on the phone and another at the door, our pricing is quoted and agreed before the first tool comes off the truck.
Our Gate Installation Services in Fairfax Station
Driveway Gate Installation
A long private drive off Ox Road or Zion Drive usually calls for a heavier gate than a short suburban driveway. We size operators for the gate’s actual weight and cycle frequency, not some generic chart. For Fairfax Station estates with gravel drives, we account for the extra drag a stone surface puts on the gate wheel and the operator’s gearbox, and we recommend operators with enough reserve torque to handle it.
Our Gate Installation team handles ornamental steel, aluminum, and wood privacy gates. We’ll match your existing fence line so the new gate doesn’t look like an afterthought.
Pedestrian Gate Installation
Plenty of Fairfax Station properties pair a wide driveway gate with a matched pedestrian gate for walking in and out without cycling the heavy operator. It saves wear on the motor and keeps horses or dogs from slipping through when the drive opens. We build pedestrian gates with the same post depth and hinge hardware as the main gate, because a sagging walk gate is still a sagging gate.
Sliding Gate Installation
Sliding gates work well on Fairfax Station lots where the driveway slopes or where a long driveway means a swinging leaf would block too much of the entry. We install cantilever and V-track slide gates, and we pay close attention to how many trees overhang the track. Falling branches and leaf debris are a constant issue in the 22039 ZIP, so we set track channels with debris clearance in mind.
Swing Gate Installation
Swing gates remain the classic look for the custom homes east of South Run and off Henderson Road. The trick on Fairfax Station soil is the post footing. Heavy clay expands and contracts through freeze-thaw cycles, and posts set too shallow will heave by the second spring. We dig deeper footings, set posts below the frost line, and use through-bolt hinge hardware rated for the gate’s full weight and wind load.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairfax Station
We’re certified to service and install equipment from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Fairfax Station jobs, we commonly spec Linear and DoorKing operators on medium-duty swing gates, and Viking or Ghost Controls on heavier estate systems. When a control board fails on a 2002-era opener, we don’t tell you the whole system is junk. We replace the board if it’s replaceable and tell you honestly when it isn’t. Parts for the brands above are stocked locally, so you’re not waiting on a UPS truck for three weeks.
Common Gate Installation Problems We See in Fairfax Station Homes
- Post heaving and misalignment: The same freeze-thaw cycle that cracks Fairfax County roads also shoves gate posts out of plumb. By March, a swing gate that cleared the ground in October is dragging on the concrete or binding at the latch. The fix starts with the post, not the panel.
- Failing underground conduit and control boards: The gates installed when these homes went up in the late 1990s and early 2000s are dying on a schedule. Wire insulation cracks, conduit fills with water, and control boards burn out. We see this on property after property across the 22039 ZIP.
- Debris in slide tracks and blocked photo-eyes: A thick tree canopy means a storm off the Occoquan watershed drops branches and leaves right onto your gate track. Slide gates stop halfway, photo-eyes get blocked, and the gate sits there stuck open until someone clears it.
- Undersized operators from old installs: A heavy ornamental gate hung in 1999 might have been paired with an operator that was undersized even then. Now it’s 25 years old, the motor is tired, and the gate is twice as hard to move. We see this constantly in Fairfax Station and we always size the new operator for the gate that’s actually there, not the gate that was ordered.
Pricing for Gate Installation in Fairfax Station, VA
| Gate Type | Typical Range (Installed) |
|---|---|
| Single swing gate - steel or aluminum | $4,800 - $7,500 |
| Double swing gate - ornamental steel | $7,500 - $14,500 |
| Sliding gate - cantilever or V-track | $6,200 - $12,000 |
| Pedestrian gate - matched to existing | $1,800 - $3,400 |
| Opener and control package (operator, keypad, photo-eyes) | $2,200 - $5,800 |
What moves the number on your job is the gate’s width and material, the operator’s duty rating, and how much site work the posts need. Fairfax Station clay soil means we sometimes pull longer and deeper footings than a job in Springfield would need. Every estimate is free, and the price we quote is the price you pay. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a written estimate.
We Also Serve Cities Near Fairfax Station
If you live just over the line, we serve Burke, Kings Park West, West Springfield, and Springfield with the same crew and the same 90-Day Done Right Promise. Fairfax Station is home base for this page, but the truck runs the whole corner of the county. Our scheduling is coordinated from the Washington, DC office, and crews serve Fairfax Station locally all week.
Serving Fairfax Station, VA - Our Local Coverage Area
We’re based in the Fairfax Station area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fairfax Station
Yes. A gravel drive adds rolling resistance, so the operator needs more reserve torque than the same gate on asphalt. We size for the gate’s actual weight plus the drag from the stone surface, and we typically recommend a higher-duty cycle rating so the motor isn’t working at its ceiling every time it opens. Call (877) 610-2993 and we’ll measure the drive and the gate before recommending an operator.
Yes. We weld on site, and we build custom steel gates to match existing fence lines, picket patterns, and finials. If you have ornamental iron on your fence that a supplier discontinued, we can often fabricate a gate that echoes it closely rather than forcing you into a stock panel that looks wrong. We’ll show you drawings before we cut steel.
Sometimes, but not always. Paddock gates are usually lighter than driveway gates, but they’re opened and closed many more times per day, so cycle duty matters more than raw weight capacity. We commonly use a residential-duty operator with a higher cycle rating for farm gates, and we set posts deep because horses lean on gates and the freeze-thaw cycle in Fairfax Station will find a shallow post. We install heavy double swing gates for paddocks regularly and size the operator for frequent cycling.
In Fairfax Station, the usual answer is debris. Branches, twigs, and wet leaf litter drop onto the track channel and the gate’s wheels either bind against it or the photo-eyes get blocked and trigger a safety stop. Sometimes the wind shifts the gate enough that it jumps the track. We clear the track, check the wheels and guides, and if the same spot keeps collecting debris, we talk about a track placement or a cantilever conversion that doesn’t ride on a ground track at all. One call to (877) 610-2993 gets someone out to look.
Yes, in most cases. If your existing posts are set well and the driveway has room for the gate to slide alongside, we can convert from swing to slide while keeping the existing gate structure if it’s worth keeping. Some heavy ornamental gates transfer over well. Others have hinge damage or rust at the connection points that makes reusing them a poor choice, and we’ll tell you that plainly. The measurement and estimate are free.
When you’re ready to talk about a new gate or a repair in Fairfax Station, call (877) 610-2993. A live person answers, we’ll schedule a time to come measure, and you’ll get a written price before anyone lifts a tool. There’s no trip charge inside the county, and every job is backed by the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fairfax Station with on-site welding and repair-first gate work since 2001.