Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Encanto
A new driveway gate in Encanto typically runs between $2,400 and $7,800 installed, with custom wrought-iron work on historic homes landing between $6,000 and $14,000. We schedule most Encanto installations within five to seven business days. Hal Gatewood has been building and hanging gates since 2001, and he still walks every job site himself. If your Spanish Colonial gate is sagging or your operator gave out, call (877) 610-2993 and a real person answers, any hour.
Encanto is not a neighborhood where you want to guess wrong on a gate. The ironwork is old, the design review is real, and the heat does not forgive cheap hardware. We know the difference between a gate you can save and a gate that needs to come out. We also know the paperwork. More on that below.
Why Gatewood Fence & Gate Is Encanto’s Preferred Gate Installation Company
Most of our Encanto work comes from referrals. A neighbor sees a gate we hung three years ago, asks who did it, and calls us. That is how it should work. Hal’s name is on the shop, the shop is in the metro area, and the person who answers your initial call is the same person who will stand in your driveway and tell you honestly whether those hinge posts can be saved.
Encanto homes are different from the rest of Phoenix. We are not hauling a stock aluminum gate off a truck and bolting it to a 1930s post. We are matching period ironwork, working under Historic Preservation Office requirements, and welding on site so your gate never leaves your property. We have a published address and license number you can look up. We have been owner-operated since 2001. And every job comes with our 90-Day Done Right Promise in writing: if it is not done right, one call brings Hal back. No runaround, no fine print.
We also answer the phone like adults. No voicemail tree, no call center. Call (877) 610-2993 at 2 a.m. and a person picks up. That matters when a gate will not close and your courtyard is open to the street.
Our Gate Installation Services in Encanto
Here is what we actually install in Encanto, week in and week out. Every Gate Installation starts with a site visit and a written quote. No changes at the door.
Driveway Gate
Driveway gates in Encanto run from simple single swing panels to full double gates with operators and safety sensors. On pre-WWII lots along streets like Encanto Boulevard and north of McDowell, we are often working with existing block perimeter walls and old iron posts. We set new footings below grade, correct the sag at the hinge post where it actually starts, and hang the gate so it swings true in 110° heat. A standard steel driveway gate install here runs $3,200 to $6,500 depending on width and finish.
Pedestrian Gate
Courtyard and side-yard pedestrian gates are everywhere in Encanto, and many of them are original to the home. When the iron is still sound, we re-hang it with new pins and weld reinforcement plates where the old hardware wallowed out. When it is gone, we fabricate a period-matching replacement. These jobs run $900 to $2,400 and usually take one visit.
Sliding Gate
Sliding gates work well on narrower Encanto lots where a swing arc would block the driveway or the sidewalk. We build them with proper track, rollers rated for heavy use, and a motor sized to the gate, not the other way around. Dust is your enemy here: monsoons pack caliche grit into roller tracks and the operator’s internal gears. We clean and re-lubricate internals on every install and every service call. Sliding installs run $3,800 to $8,200.
Swing Gate
Swing gates are the classic Encanto style, and the hinge post is where ninety percent of failures begin. On a 1930s iron gate, the post is often rusted out below grade even if it looks fine at the surface. We dig it out, set new steel with concrete, and align the gate before mounting the operator. A single swing install with new operator runs $2,800 to $5,900. A double swing gate, which many Encanto driveways use, runs $4,500 to $9,800.
Double Gate
Double gates are standard on Encanto’s wider Spanish Colonial lots, and they punish sloppy work harder than anything else. Two leafs must meet in the middle with no sag, no drift, and no binding. We build them with a center stop, reinforce the meeting stile, and sync the operators so one leaf never outruns the other. Haboob season will find any weakness in a double gate within a month.
Security Gate
A security gate in Encanto is not a style choice. It is about keeping a courtyard and an open driveway from inviting trouble. We build heavy-gauge steel frames, set posts deeper, and add operators with battery backup so the gate works when monsoon storms knock out power. We never bolt a security gate to weak posts and call it done. These installs run $4,200 to $11,000 depending on width, automation, and site conditions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encanto
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. In Encanto we see a lot of Viking and DoorKing on older custom gates, and Ghost Controls on retrofits where the homeowner added automation years after the gate was hung. We stock common parts in our metro shop so we are not waiting on a distributor while your driveway sits open. If the board is obsolete, we will tell you plainly and give you a retrofit price that is cheaper than throwing good money at a 20-year-old control panel.
Common Gate Installation Problems We See in Encanto Homes
- Original hinge posts rusted through below grade. A 1930s gate post can look solid above the dirt and be paper-thin underneath. That is why the gate sags, which binds the operator, which burns out the motor. We set new posts below the frost and soil line and weld the gate back to true.
- Modern drop-in hardware does not fit original hand-forged iron. Big-box gate hinges are sized for extruded aluminum, not 90-year-old wrought iron. We field-fabricate and weld what the gate actually needs in your driveway.
- Operators burned out by forcing a seized gate. We see this constantly in Encanto. A homeowner installs a new LiftMaster or Ghost Controls opener on a gate that had not swung freely in 20 years. The motor overworks, the gear housing cracks, and it fails inside two years. We align the gate first, then hang the operator.
- Historic design review stalling the job. Portions of Encanto fall under Phoenix Historic Preservation Office oversight. If a contractor shows up with a modern aluminum panel and no idea that design review applies, the project stalls and the driveway sits unsecured. We have managed these approvals before and factor them into the timeline from day one.
Pricing for Gate Installation in Encanto, AZ
Here is what you can expect in Encanto’s market, based on the work we have done on this block and the next one over:
- Pedestrian gate install: $900 - $2,400
- Single swing driveway gate with operator: $2,800 - $5,900
- Sliding driveway gate: $3,800 - $8,200
- Double swing driveway gate with dual operators: $4,500 - $9,800
- Custom period-matching iron gate on a historic home: $6,000 - $14,000
What moves the price: gate width, whether we are reusing existing posts or setting new ones, operator brand and features, and whether Historic Preservation review applies. We quote the price before any work starts, and that is the price you pay. Free estimates, no trip charge inside the county. Seniors and veterans get a permanent 10% discount. If you have a written estimate from another company, bring it in and Hal will give you a free second opinion.
We Also Serve Cities Near Encanto
We handle gate installation across the central Phoenix area, including Encanto, Central City, Phoenix, Alhambra, and Maryvale. Most of these neighborhoods share the same mid-century housing stock and the same heat and dust problems, and our crews know the design-review rules in each jurisdiction. If you are a few blocks outside Encanto proper, call anyway. We are already in the area.
Serving Encanto, AZ - Our Local Coverage Area
We’re based in the Encanto area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Encanto
If your home falls under Phoenix Historic Preservation Office review, the replacement gate must generally match the period, character, and material of the original. That means real wrought iron or steel with period-appropriate detailing, not modern aluminum slats or vinyl. We have guided Encanto homeowners through this process and can tell you at the quote stage whether a design review applies and what it will require. Call (877) 610-2993 and we will walk you through it.
Almost always, yes, if the gate structure is sound. The work is in the preparation: we weld reinforcement at the hinge points, replace worn pins, set posts that have rusted below grade, and true the gate before the operator goes on. Then we install a modern opener with current safety sensors. This is the repair-first approach Hal has used since 2001, and it usually costs less than replacing good iron. Call for a site quote and we will tell you honestly what the gate needs.
Because the gate was probably binding, and nobody fixed that before the operator was installed. Phoenix heat plus haboob grit plus a hinge post that does not swing freely is a death sentence for gear housings and control boards. We check alignment and operator internals on every install so the motor is pushing a gate it can actually move. If yours died early, call us and we will find the root cause instead of selling you another motor to burn up.
Fix the hinge post. A sag starts where the post meets the ground, not in the middle of the gate. We dig out the old post, set new steel below grade, and weld the gate back to true. It is a one-day job in most Encanto driveways and costs far less than replacing the gate. The cheapest fix is the one you do once. Call (877) 610-2993 and we will give you a written price before any work begins.
Yes. Modern automated gates are required to have photo-eye sensors and, on many installations, edge sensors that reverse the gate if it contacts something. The UV in Phoenix breaks down rubber seals on these sensors within three to five years, so we check and replace them on every service call. If your gate is missing these safety devices, it is not up to code and it is dangerous. We will bring it into compliance as part of any install.
Call Gatewood Fence & Gate in Encanto
If you live in Encanto and your gate is sagging, seized, or just tired, call (877) 610-2993. You will talk to a person, not a menu. We will come out, look at the gate, give you a written quote, and never change the price at the door. Hal Gatewood has been doing this since 2001, and his name is on every invoice. The 90-Day Done Right Promise is in writing on every job. If you would rather look someone in the eye first, drive to the shop. The address is published, and the coffee is usually on.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encanto since 2001.