Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Emeryville
Gate installation in Emeryville runs $2,700 to $8,400 for a typical automated sliding or swing gate, with most mid-rise condo and loft complex jobs landing between $3,500 and $5,500 depending on the run length, operator brand, and what the salt air has already eaten. We’re Gatewood Fence & Gate, and we’ve been building and fixing gates in the East Bay since 2001. Hal Gatewood owns the shop and still shows up to most Emeryville sites himself. If your gate operator just died at a condo off Shellmound Street or your live/work loft needs a new vehicular gate off the old Sherwin-Williams parcel, call (877) 610-2993 and a live person will answer, day or night.
Why Gatewood Fence & Gate Is Emeryville’s Preferred Gate Installation Company
We know Emeryville’s gates because we’ve watched them age since the redevelopment boom put them in. Most automated gates in the city went in between the mid-1990s and 2010, when the old industrial parcels got turned into mixed-use condo towers and loft conversions. Those gates are now hitting the wall together. We don’t send a faceless crew to Emeryville and hope for the best. Hal Gatewood’s name is on the shop and on every invoice, and the person who shows up at your property is accountable to him directly.
Emeryville customers call us because we answer the phone around the clock and because we tell the truth about what a coast-side gate actually needs. The 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, we make it right. No fine print, no follow-up fight. A live person answers every call, 24/7. Not a voicemail, not an automated queue. A person who knows gates.
We’re licensed and insured, and our Gate Installation crew works across Emeryville from the 94608 zip code down to the warehouse district near the 94662 side. Response time to Emeryville is usually same-day for emergency calls and next-day for scheduled onsite quotes. You’ll get a written price before any work starts, and the number doesn’t change at the door.
Our Gate Installation Services in Emeryville
Sliding Gate Installation
Sliding gates are the workhorse of Emeryville’s shared parking structures and condo complexes. They run on steel track and rollers, and in Emeryville those components die early from salt air. A new sliding gate installation in Emeryville typically runs $3,500 to $7,800 for a single-leaf system, depending on opening width and whether we’re replacing corroded track or starting fresh. We’ll handle the concrete footing, the track, the operator, and the safety edges, and we’ll spec galvanized or stainless hardware so you’re not back in the same spot in five years.

Swing Gate Installation
Swing gates work well on Emeryville properties with enough setback, which isn’t always the case in the tight live/work alleyways off Hollis Street or around the mixed-use blocks near 40th. We’ll tell you honestly whether a swing gate makes sense for your opening or whether a slide gate will last longer given the traffic load. Dual-leaf swing installations in Emeryville usually run $3,000 to $6,500. High cycle counts at condo entries mean the hinge posts need reinforcing, and we do that correctly the first time.

Security Gate Installation
Security gates in Emeryville aren’t a luxury. They control access to underground parking garages, delivery areas, and pedestrian entries where vehicle and foot traffic mix daily. A properly spec’d security gate here needs rapid-close safety photocells, loop detectors that can handle constant use, and hardware that won’t rust out near the bay. Security gate installation in Emeryville starts around $4,000 and goes up based on height, surface mounting, and access control integration. We’ll wire in keypad entry, card readers, telephone entry, or simple fob systems.

Pedestrian Gate Installation
Pedestrian gates flank the vehicular gates at most Emeryville condo and loft buildings, and they take a beating from package deliveries, grocery carts, and constant foot traffic. A new steel pedestrian gate in Emeryville runs $950 to $2,600 installed, including the frame, hinges, closer, and lock. We often install these as part of a full entry replacement, because the old pedestrian gate is usually welded to a post that’s rusting at the same rate as the bigger gate.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Emeryville
We install and service the brands most Emeryville buildings already have on their walls. Viking, Ghost Controls, and DoorKing are the ones we see most often on Emeryville’s condo gates. LiftMaster and FAAC show up heavily too, especially on mid-2000s builds. We stock parts for these brands locally, which means when a DoorKing board fails at a building off Powell Street, we don’t wait a week for a distributor to ship from Illinois. If your building has one of these operators and it’s dying, we can usually swap in a new unit and have the gate running same-day.
What Emeryville’s Salt Air Does to Gate Hardware
Here is the thing most gate companies won’t tell you, because they don’t live here. Emeryville sits directly on the eastern edge of San Francisco Bay. The marine layer rolls in most mornings, and the salt-laden air blows through the condo towers and loft conversions constantly. That air oxidizes steel fast. We see zinc-plated hinge brackets that rust through in under five years on gates a few blocks from the water, where the same bracket would last fifteen years in Piedmont or the Oakland hills. Stainless steel fixings, galvanized track hardware, and post footings with proper drainage are not an upgrade on an Emeryville bayfront gate. They are the minimum spec if you want the gate to outlive your mortgage.
We replaced a rusted slide gate rack and pinion at a former Sherwin-Williams parcel loft complex near the bay, where the salt air had eaten the galvanized steel track in under eight years. Our crew swapped in stainless fixings, a new LiftMaster gate operator, and a stainless hinge post footing before re-hanging the gate. Then we programmed the safety photocell and loop detector so the gate wouldn’t close on the building’s delivery vans. That job should have lasted twenty years. With the original hardware, eight was all it got.
Common Gate Installation Problems We See in Emeryville Homes
- Corroded hinge posts fail before the gate panel. On Emeryville bayfront properties, the post rusts at the base where water pools around the footing. The gate panel looks fine, but the post is hollowed out and the whole assembly sags. We fix the post, not the panel.
- Mid-2000s operators dying in clusters. Emeryville’s redevelopment boom put LiftMaster and FAAC operators on nearly every parking entry at the same time. Those units are now hitting 15 to 20 years old all at once, and boards and motors are failing on the same block. We can sometimes book replacements at multiple buildings on the same street in a single day.
- High cycle counts kill loop detectors. Emeryville gates close and open constantly from shared parking use. Detector loops wear out from the traffic volume, causing phantom opens or gates that sit open. It’s a cheap fix once we know the loop is the problem, which is why we test it before we touch the motor.
- Salt air eats rack and pinion track on sliding gates. Galvanized track hardware last five to eight years near the bay. Stainless replacements last substantially longer, and we spec them on any Emeryville coastal installation by default, not as an upsell.
Pricing for Gate Installation in Emeryville, CA
Here are honest numbers for Emeryville’s market. A basic single-leaf sliding gate with a mid-grade operator runs $3,500 to $5,500 installed. Double-leaf swing gates run $4,000 to $8,400. Pedestrian gates run $950 to $2,600. Security gates with access control, keypad entry, and reinforced steel start around $4,500 and go up from there. What moves the price is the opening width, what the salt air has already destroyed, and whether we’re doing fresh footings or replacing rusted track along with the gate. We quote the full price before any work starts, and the quote doesn’t change. Free estimates for every Emeryville property. Call (877) 610-2993 to get one.
We Also Serve Cities Near Emeryville
If you’re across the border in Berkeley or Piedmont, or down the road in Oakland or Albany, we work there too. Our Gate Installation in Emeryville crew spends plenty of time in those neighboring cities, and the same pricing and warranty apply. The 90-Day Done Right Promise doesn’t stop at the city line.
Serving Emeryville, CA - Our Local Coverage Area
We’re based in the Emeryville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Emeryville
They were all installed during the same construction wave, roughly 1995 to 2010, so their service lives end at the same time. The 15-to-20-year mark has arrived for most LiftMaster, FAAC, and DoorKing units across Emeryville’s condo and loft parking decks. Combined with salt air corrosion and high cycle counts, the cluster failure you’re seeing on your block is normal for Emeryville. We can often replace operators at multiple buildings on the same street during one day’s work. Call (877) 610-2993 to schedule a site visit and get a written quote.
No. Galvanized track hardware lasts five to eight years on Emeryville bayfront properties before the salt air corrodes it through. Stainless steel track fixings and hardware cost more upfront but last two to three times as long. For any slide gate within a few blocks of the Bay, we spec stainless by default, not as an optional upgrade. The labor is the same either way. The material difference saves you a second full installation.
Look for the UL 325 listing on the operator’s nameplate, and verify that it has working safety photocells and a functioning reverse mechanism on the gate edge. If the gate can push against a person or a vehicle without reversing, it fails the entrapment standard and is both dangerous and non-compliant. Our team checks entrapment protection on every installation and repair we do in Emeryville, and we’ll flag it on any existing system we open for service. Call (877) 610-2993 to have yours checked.
The sag is almost always at the hinge post or the footing, not the gate panel itself. In Emeryville the post rusts at the base where bay salt air and moisture collect around the footing, and that corroded base lets the whole assembly lean. Fix the panel without the post and you’ll fix it twice. We inspect the post footing and replace the post when we install your new gate, so the sag doesn’t come back.
Not reliably on its own. Emeryville’s morning marine layer and coastal fog limit the direct sun a solar panel sees, especially during spring and summer, when the fog is worst. A solar opener can work with a properly sized panel and a good battery bank, but for a gate that cycles constantly at a condo or loft entry, we recommend hardwired AC power. If solar is the only option, we’ll size it realistically for Emeryville’s sun hours and tell you honestly what it can handle. Call (877) 610-2993 for a free site evaluation.
Get a Free Estimate for Your Emeryville Gate
If your gate operator is dying, your slide gate is sagging, or you need a new gate at an Emeryville property, call (877) 610-2993. You’ll get a live person on the phone, and we’ll schedule a free onsite estimate. The price we quote is the price you pay, and every job carries our 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and he serves Emeryville personally. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Emeryville and the wider East Bay since 2001.





Before
After
Before
After
Before
After