Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Eagleton Village
A new gate in Eagleton Village runs $2,800 to $11,500 for most residential installs, including the operator, posts, and the crew’s time on site. That’s the honest range we quote up front, and we stick to it. If you live off Old Knoxville Highway or along the hill roads near the 37853 corridor, you already know what wet foothill soil and ice storms do to a gate that wasn’t set right the first time. That’s exactly why we take our time with the footing and the post, not just the pretty part hanging between them. Call (877) 610-2993 and Hal will talk you through what your driveway actually needs.
Why Gatewood Fence & Gate Is Eagleton Village’s Preferred Gate Installation Company
We’ve been at this since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That matters in a place like Eagleton Village, where a bad gate job gets noticed by every neighbor who shares the driveway. We’re not a franchise and we don’t send a rotating cast of strangers. The person who shows up to measure your gate is the same person who’ll be back if something’s not right, and our 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings us back.
Our crew works throughout Blount County every week. Scheduling for Eagleton Village is coordinated from our Memphis office, but the people turning wrenches here know the local ground. They know that a standard post-hole depth spec from a manufacturer in Texas doesn’t hold up when January freeze-thaw cycles hit the foothills. They know which gravel driveways on the hill side of the 37853 need a beefed-up slide gate base because the rain never really stops up there. And they’ll tell you plainly if a swing gate is the wrong call for your driveway, instead of selling you one and coming back next winter to fix it.
Our Eagleton Village customers call us because a live person answers, any hour, not a voicemail tree. You get upfront pricing before the first tool comes off the truck, and there’s no trip charge inside the county. Seniors and veterans always get 10% off. Those aren’t gimmicks. They’re how Hal has run the place for over two decades.
Our Gate Installation Services in Eagleton Village
We hang, weld, automate, and stand behind every type of gate that makes sense for the terrain and driveway layout you’ve actually got. Here’s what we install most often around Eagleton Village:
Driveway Gate
A driveway gate in Eagleton Village usually means a long gravel approach, a shared right of way, or both. We measure the grade, check the soil, and build for what the mountain weather will do. That starts with a footing poured below the frost line and posts that won’t lean by March. We set the operator to handle a full-size farm truck if that’s what’s coming through, and we wire the safety eyes so the gate won’t close on a horse trailer halfway through.
Sliding Gate
Slide gates are the workhorse of the 37853 ZIP. When a swing gate doesn’t have room to arc, or when the driveway is too steep, a slide gate rides on a track and hugs the fence line instead. Around here the failure we see most is cheap rollers clogging with mud from all the rain and tripping the obstruction sensor. We use sealed-bearing rollers and a rack and pinion setup that shrugs off Blount County mud season. If you’re replacing an old swing gate on a shared driveway, this is often the fix.
Swing Gate
A properly hung swing gate in Eagleton Village has to survive freeze-thaw, torrential spring rain, and a post that wants to move. We weld on site, which means we can adjust the hang to your exact post, not a factory template. For a farm-style gate on an older gravel drive, we’ll often reinforce the hinge post with a deeper footing and gusset plates before we hang the gate. Otherwise you’ll be dragging the latch side out of the gravel by February. We’d rather do it once.
Security Gate
Security gates around Eagleton Village tend to serve two purposes: keeping livestock in and keeping drive-by traffic out. Both need an operator that won’t fail when ice coats the rack. We install operators from Viking, FAAC, and LiftMaster with battery backup so the gate still works when a winter storm knocks out power. We also set entrapment protection correctly: photocells, contact edges, and pressure settings that stop the gate if a child or animal is in the swing path. That’s not optional, and we won’t skip it to save you a buck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eagleton Village
We’re certified on nine major gate brands, and around Eagleton Village we see a lot of FAAC, BFT, and Viking systems on the older custom homes and working farms. That’s why we stock common parts for those brands locally, so a failed opener board doesn’t mean two weeks of waiting on a warehouse shipment. Newer installs often get a Linear opener when it fits the gate and the traffic pattern. Whatever the brand on your post, we’ll service it honestly. If it’s a part worth saving, we repair it. If it’s dead, we tell you straight and quote a replacement without padding the bill.
Common Gate Installation Problems We See in Eagleton Village Homes
These are the failures we fix most often on gates installed by someone who didn’t know the local ground:
- Cracked hinge post footings from January freeze-thaw cycles. The foothills get more ice events than Knoxville proper, and a footing poured too shallow cracks open when water freezes and expands. The gate sags, the latch side drags the gravel, and the opener burns out trying to move it.
- Slide gate rollers binding from mud and orographic rain. Eagleton Village sits at the base of the Smokies, where storms push up against the mountains and drop more rain than Maryville sees. Open-bearing rollers clog, the gate binds, and the operator trips its obstruction sensor and quits. Sealed bearings and a covered track fix this for good.
- Swing gates installed where a slide gate belongs. On shared driveways with tight setbacks, a swing gate arcs out into the neighbor’s lane or across the road. The right fix is a slide gate on a rack and pinion track, which we stage to one side so traffic keeps moving during the install.
- Wooden gate frames swelling out of alignment in summer humidity. Fifty-five inches of rain a year means wooden gates soak up moisture, bow, and stop latching. We replace them with steel frames or properly sealed kiln-dried stock, and we build in clearance for the inevitable seasonal movement.
Pricing for Gate Installation in Eagleton Village, TN
Here’s what we quote in this market, and we write it down before any work starts:
- Swing gate, single leaf, steel or aluminum: $2,300 to $5,200
- Sliding gate, single leaf with rack and pinion: $3,100 to $6,800
- Double swing gate, pair of leaves with opener: $6,000 to $11,500
- Post footings, per post, below frost line: $400 to $950
- Operator and entrapment protection, included in most local installs, but quoted separately on retrofits: $1,100 to $3,000
The price is agreed before we start, and it doesn’t change at the door. No trip charge inside the county, seniors and veterans save 10%, and $40 comes off any repair over $200. Call (877) 610-2993 for a free estimate on your specific driveway.
We Also Serve Cities Near Eagleton Village
If your property sits just outside the 37853 line, we cover the whole foothill corridor. That includes Eagleton Village proper, plus Alcoa, Maryville, Knoxville, and Seymour. And if you want to see the full range of what we build, from pedestrian gates to full automatic driveway systems, take a look at our Gate Installation service hub.
Serving Eagleton Village, TN - Our Local Coverage Area
We’re based in the Eagleton Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Eagleton Village
Because the driveways here are often shared, steep, or both. A swing gate needs clear space to arc, and on a tight shared driveway off Old Knoxville Highway there often isn’t any. A slide gate runs parallel to the fence line and uses less depth, so it fits where a swing gate physically cannot. We also see slide gates replacing older swing gates when the hinge post footing has cracked from freeze-thaw and re-pouring it won’t fix the underlying drainage problem. Call (877) 610-2993 and we’ll tell you which one fits your driveway before you spend a penny.
They crack concrete if the footing doesn’t go below the frost line, and around Eagleton Village that means deeper than a flatland install. Water seeps into the concrete, freezes, expands, and fractures the footing from the inside. The hinge post leans, the gate sags, and the whole thing fails within a couple of winters. We dig deeper, use proper drainage gravel at the base, and build the post connection so water can’t pool against the steel. It’s the difference between a gate that works for 20 years and one that fails in two.
Yes, and we do it regularly. On a shared driveway off Old Knoxville Highway, our crew replaced a rusted Viking swing gate with a new slide gate on a rack and pinion track after the original hinge post footing cracked. We kept the single lane open for two farm trucks and a horse trailer by staging the slide gate to one side, mounting a LiftMaster operator with safety photocells, and setting the loop detector to hold open for slow-moving agricultural equipment. The neighbors never missed a day of access. That’s the standard, not the exception.
A powder-coated steel gate with a galvanized frame base, sealed-bearing rollers if it slides, and stainless hinge hardware if it swings. Bare iron rusts fast in Eagleton Village’s year-round moisture, and unsealed wood swells and bows. We specify a finish rated for coastal humidity even though this isn’t the coast, because 55 inches of orographic rain acts a lot like salt air when it comes to oxidation. For operators, we lean toward brands like FAAC and BFT that have a strong history in wet climates.
Yes. Every new automatic gate with an operator must have entrapment protection: photocells across the opening, contact edges on the closing face, and pressure-sensing controls that reverse the gate if it hits anything. It’s not a recommendation. It’s a federal safety standard, and it protects kids, pets, and livestock. We install and test the full set on every job. If a quote leaves this line off to look cheap, walk away. Call (877) 610-2993 for a free estimate that includes all required safety equipment, spelled out in writing.
Ready to Build a Gate That Lasts in Eagleton Village?
If your gate needs replacing, or you’ve got a new build that needs a proper entrance, call us at (877) 610-2993. Hal will talk you through the options, give you a straight price, and never rush a footing pour. The name is on the shop, and in Eagleton Village that still means something.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eagleton Village and Blount County since 2001.