Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Doylestown
Gate installation in Doylestown usually runs between $1,800 and $7,500 depending on whether you’re hanging a single ornamental pedestrian gate or building a full automated driveway system. We schedule most Doylestown jobs within 5 to 7 business days of the site visit. A new gate on one of the borough’s older fieldstone pillars is a different animal than a modern township driveway install, and that’s exactly the kind of work we’ve been doing since 2001. Call (877) 610-2993 and you’ll get Hal or someone from his crew, not a recording.
Why Gatewood Fence & Gate Is Doylestown’s Preferred Gate Installation Company
We’re local in the way that matters. Our shop is down the road, not three states over, and our name is on every invoice. When you call about a gate installation in Doylestown, the person who answers knows what a fieldstone pillar looks like and why it changes the whole job. Hal Gatewood has been running this company since 2001, and the van that shows up in your driveway is driven by someone whose paycheck says Gatewood on it.
Doylestown homeowners keep our number for a reason. We don’t subcontract, we don’t send a sales rep with a binder, and we don’t quote one number on the phone and a different one at the door. The price you agree to before we start is the price on the invoice, period. Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no fine print.
We answer the phone around the clock with a live person. That matters in Doylestown when a gate hangs up at 10pm and your driveway is the only way in. It also matters when you want a straight answer about whether to repair or replace a gate that’s been hanging there since before the borough had stoplights. We’ll tell you the truth, even when the truth is that the old gate is worth saving.
Our Gate Installation Services in Doylestown
Driveway Gate Installation
Doylestown’s 18902 township is full of large-lot homes built since the 1980s, and many of those properties have long driveways that beg for a proper automated gate. We install steel and aluminum driveway gates on poured-concrete footings, with operator and keypad wiring run to code. A typical single-leaf driveway gate with a basic operator in Doylestown township runs $3,200 to $6,800, depending on width and automation choices. We measure, order, and install in sequence, and we never rush the concrete cure.
Pedestrian Gate Installation
Around the 18901 borough, the pedestrian gate is often the front door. We hang decorative steel and aluminum pedestrian gates between brick and fieldstone pillars, and we take the masonry seriously. On pre-1920 homes, standard through-bolting can spall the face right off a fieldstone pillar. We use surface-mount brackets or epoxy-set anchors instead, and we match the gate’s original hinge style so the whole thing looks like it’s been there a century. A modest ornamental pedestrian gate in Doylestown typically runs $1,800 to $3,400 including hardware and careful pillar work.
Sliding Gate Installation
Sliding gates make sense on Doylestown township properties where the driveway slopes up from the road or where a swing gate would arc into the street. We install cantilever and track-style sliding gates, handle the concrete pour for the track or stopper posts, and wire the operator to code. These jobs run bigger, usually $4,500 to $7,500 for a full motorized sliding setup. If your driveway is tight against a stone wall or mature tree line, sliding is usually the smarter call, and we’ll tell you so.
Swing Gate Installation
Swing gates are the most common gate style in both Doylestown ZIP codes, but the installation differences between the borough and township are stark. Township swing gates hang on steel posts set in concrete and mostly just need straight posts and level ground. Borough swing gates often hang on granite or fieldstone pillars that have been there since the 1800s, and those require a surgeon’s touch. We install both, and the fieldstone work is something we do on site, not something we farm out. A double swing driveway gate in Doylestown runs $3,800 to $7,200 installed with operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Doylestown
We’re certified to work on nine major gate brands, and in Doylestown we see a lot of DoorKing and Viking operators on older township installs, plus Ghost Controls on newer DIY retrofits. If you’ve got an Elite opener that’s been running since the Clinton administration, we know the board inside it. We keep common parts at the shop so a Doylestown job doesn’t stall waiting on a shipment from California. And when a board is genuinely obsolete, we’ll tell you that too, before you pour more money into a motor that’s already on borrowed time.
Common Gate Installation Problems We See in Doylestown Homes
- Fieldstone pillar spalling from through-bolts. On pre-1920 borough properties, a standard hinge replacement with through-bolts can crack the face off a fieldstone pillar. We use surface-mount hardware and epoxy-set anchors instead, a fix that keeps the stone intact and the gate plumb.
- Post-heave misalignment every spring. Doylestown averages 20 to 30 freeze-thaw cycles each winter, and the piedmont clay under our feet holds water and heaves. Swing gates that were plumb in October bind on the latch post by April. Realigning and resetting posts is the single most common springtime gate call we get in both ZIP codes.
- Obsolete operator boards from the 1980s and 1990s. A lot of Doylestown township gates went in during the building boom, and their control boards don’t support modern UL 325 safety photocell retrofits. Sometimes we can wire around it. Sometimes the right answer is a new operator, and we’ll show you exactly why.
- Worn pintle hinges on historic gates. The borough’s cast-iron and wrought-iron gates often hang on pintle hinges that were hand-forged. When they wear, the gate drops and drags. We source replacement pintles that match the original profile, so the gate swings true without losing its historic character.
Pricing for Gate Installation in Doylestown, PA
Here are honest numbers for the Doylestown market. A single ornamental pedestrian gate with pillar work runs $1,800 to $3,400. A single swing driveway gate with operator lands between $3,200 and $5,500. A double swing driveway gate, which is common on 18902 township properties, runs $3,800 to $7,200. Sliding gates come in at $4,500 to $7,500 for a full motorized install. What moves the number is gate width, material choice, the condition of your existing pillars or posts, whether we’re pouring new concrete, and whether the operator needs new wiring run to the house. Every quote is written, and the price is agreed before any work starts. No trip charge inside the county, and we’ll give you a free second opinion on any written estimate from another company. If you’re a senior or a veteran, take 10% off any install permanently. Call (877) 610-2993 to schedule a free measure.
We Also Serve Cities Near Doylestown
Our Gate Installation team covers Doylestown and the surrounding communities, including Bedminster, Perkasie, Montgomeryville, and Lansdale. If you’re in a neighboring town and dealing with a sagging gate or a dead operator, the same crew that works in Doylestown will come out to you. Call (877) 610-2993 and we’ll put you on the schedule.
Serving Doylestown, PA - Our Local Coverage Area
We’re based in the Doylestown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Doylestown
Yes, we do it regularly. On pre-1920 borough homes, we avoid through-bolting and use surface-mount brackets or epoxy-set anchors instead, which keeps the fieldstone intact while giving the gate a solid anchor. We match the original hinge style so the new gate looks right on the old pillar. Call (877) 610-2993 and we’ll take a look at your specific pillar before recommending hardware.
Doylestown’s piedmont clay soil holds water, and 20 to 30 freeze-thaw cycles a year heave the ground enough to shift gate posts several inches out of plumb. The fix is usually a post reset and realignment, not a new gate. In spring we see this constantly across 18902. If your gate is binding on the latch post, call (877) 610-2993 and we’ll get it swinging true again.
It depends on the board, and we’ll tell you straight. Some 1980s and 1990s DoorKing and Viking boards can be wired to accept modern UL 325 photocell retrofits. Others can’t, and at that point a new operator is cheaper than fighting an obsolete board. We won’t sell you a retrofit that won’t hold. Call (877) 610-2993 with the operator model and we’ll give you a read on it over the phone.
Yes, sliding gates are a regular install for us on 18902 properties where the driveway runs long or steep. We handle the concrete pour, the track or stopper posts, the gate itself, and the operator wiring. A full motorized sliding gate in Doylestown township runs $4,500 to $7,500, and the price is locked before we start. Call (877) 610-2993 for a free measure.
We do, and we treat them differently than a modern township gate. Those tall wrought-iron double gates often hang on century-old pillars that need specialty anchors, and we source pintle hinges that match the original profile instead of swapping in generic hardware. If the gate has been in Doylestown longer than any of us, it deserves that care. Call (877) 610-2993 and ask for Hal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Doylestown since 2001.