Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Denton
A new driveway gate in Denton typically runs $2,400-$7,800 installed, depending on whether you’re replacing a single swing gate on an existing concrete pad or building a full double slide gate with automation and keypad entry. Most jobs in the 76210 corridor and around Robson Ranch take one to two days once materials are on site. Call (877) 610-2993 and you’ll reach a live person who can tell you whether your project needs a city permit and how far out we’re scheduling.
We work in Denton every week, from the older neighborhoods off University Drive to the newer HOA communities along Highway 380. Hal Gatewood has been running this company since 2001, and the crew that shows up at your driveway is the same crew that welded the last gate down the street. You won’t get a call center or a rotating cast of subcontractors. You’ll get a name you can verify and a shop you can drive to.
Why Gatewood Fence & Gate Is Denton’s Preferred Gate Installation Company
Denton has a split personality when it comes to gates. The neighborhoods around UNT and TWU are full of modest mid-century homes with cedar-board and chain-link gates that have been patched and re-hung for decades. Head east or south into 76208 and 76210 and you’re looking at HOA-governed subdivisions where ornamental iron and aluminum slide gates are the standard, and the HOA’s architectural committee means business. We install both kinds and we don’t try to sell you one when you need the other.
Our customers in Denton call us for different reasons than homeowners in Flower Mound or Lake Dallas call us for the same service. In Robson Ranch, the active-adult community on the west side, the concern is usually about dependability: a gate that opens every single time, a keypad that doesn’t require reading glasses, and a battery backup so a power outage doesn’t leave you trapped in your own driveway. In the student-rental neighborhoods near campus, it’s more often about a gate that got backed into and now drags on the slab. Same crew, same standards, different conversation.
Every Denton job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. That’s not a slogan. Hal’s name is on the shop and on your invoice. If you want, you can drive over and look him in the eye. Around here, that still means something.
Our Gate Installation Services in Denton
The four jobs we do most in Denton are driveway gates, pedestrian gates, sliding gates, and swing gates. Here’s what each one looks like in this city, with real numbers from jobs we’ve actually done here.
Driveway Gate Installation
A full driveway gate installation in Denton runs $3,200-$7,800 for a double swing or slide gate with steel or aluminum frame, hinges or track, and a basic opener. If you already have stone or brick columns from a prior gate, the price drops because we’re not pouring new footings. In the 76210 master-planned communities, most of what we install is ornamental iron that matches the HOA’s approved palette, so the panel order goes in before we ever break ground.
Pedestrian Gate Installation
Pedestrian gates in Denton are the most common project we quote and the one with the widest price spread. A simple walk gate with a tube-steel frame and pickets runs $650-$1,400 installed, while a lockable pool-safety gate with self-closing hinges and a mag latch runs higher, especially if it has to meet Denton’s pool barrier code. For reference, the homes around Southridge and Idiot’s Hill lean toward the heavier iron look, while the older rentals near UNT tend to get a straightforward replacement.
Sliding Gate Installation
Sliding gates are the default choice on Denton lots where a swing gate would eat up the driveway turnaround. A cantilever slide gate with a trackless bottom runs $3,500-$6,900 installed, automation included. One thing to know before you commit: Denton’s Blackland Prairie clay expands and contracts hard enough across a wet-dry season that even a perfectly set slide gate truss can drift a half inch out of level within eighteen months. We compensate with a deeper post embed and a stouter concrete pour than the manufacturer’s generic instructions call for. That difference is why our slide gates in Denton stay smooth while others start rattling by the second spring.
Swing Gate Installation
Swing gates remain the most popular option for Denton homeowners who want a classic double gate look. A single swing gate on an existing post runs $2,400-$4,200 with operator, and a double swing gate set on new posts goes $4,500-$7,200. Here’s the hard truth: in Denton, the swing gate is only as good as the post footing. The clay heaves, the post moves, the gate starts dragging or failing to latch, and suddenly you’re six months past install chasing a warranty call. We set swing gate posts deeper than code and we brace them. The gate sags in the hinge post, not in the middle, and that’s where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Denton
We’re certified to service nine major gate brands, and in Denton the three we install most are FAAC, BFT, and Ghost Controls. FAAC and BFT operators show up on the older estate-style gates along Country Club Road and down toward Corinth, while Ghost Controls keypads and remotes are everywhere in Robson Ranch. We stock common parts for these lines locally, which means we’re not waiting on a distributor truck from Dallas when your board goes down. If your gate needs a LiftMaster or Viking part, we can typically source it within one or two days and get you back to full function.
Common Gate Installation Problems We See in Denton Homes
- Clay heave throws hinge posts out of plumb. Denton sits on Blackland Prairie clay that swells in wet winters and shrinks in drought summers. A post set at 36 inches deep can shift enough in one season to make a freshly installed swing gate drag or fail to latch.
- Ice storms seize exposed hardware. February 2021 earned a permanent place in Denton’s memory. Hollow steel frames warped, rack-and-pinion slide hardware seized, and we ran service calls for weeks. If you’re installing a new gate now, we size the reinforcement and seal the operator differently than we would in a dryer, warmer county.
- Robson Ranch HOA color mismatches. Out-of-town installers show up with generic black panels and leave without a signed work order because the HOA rejected the finish. Robson Ranch enforces strict ornamental-iron style and powder-coat color standards, which we quote against before you spend a dollar.
- Automation sized for a gate that doesn’t match. In the older neighborhoods off Malone Street, we regularly see openers that were over-spec’d for a lightweight chain-link walking gate, or under-spec’d for a heavy solid-panel swing gate. The operator should match the gate’s weight and cycle rate, not the size of the driveway.
Pricing for Gate Installation in Denton, TX
Here’s what we quote, in real numbers, for Denton. A single swing driveway gate on an existing post: $2,400-$4,200. A double swing gate with new posts and automation: $4,500-$7,200. A cantilever slide gate: $3,500-$6,900. A pedestrian gate: $650-$1,400, more for pool code compliance. What moves the number: whether you have existing posts, the length of the gate, whether you want a keypad or remote, and whether your HOA requires a specific powder-coat finish that has to ship from the Tulsa shop. Every quote is written down before work starts. No phone number, no handshake, no surprises. We don’t work that way. The price we quote is the price on the invoice.
Denton’s Blackland Prairie Clay Changes Gate Installation Before the First Inspection
If there’s one thing we’d tell every Denton homeowner before they buy a gate, it’s this: the soil under your driveway is going to move, and the gate has to be built to move with it. The Blackland Prairie formation under Denton is some of the most expansive clay in Texas. Between a wet spring and a dry August, the ground can heave several vertical inches. Standard post footings called for by national manufacturers were written for sandier, more stable subsoils. In Denton, a swing gate post set with a basic 36-inch concrete pour can wobble out of plumb within a single wet-dry cycle, which is exactly the kind of slow failure that turns a $4,000 gate into a $600 repair call by the following summer.
At a home off Savannah Trail in the Canyon Falls community, our crew reset a leaning double swing gate after the clay heaved the hinge post out of plumb. We dug the old footing, poured a deeper post base with extra rebar, then installed a LiftMaster LA400 operator with battery backup and a Ghost Controls keypad entry so the retired owners could come and go without wrestling the gate. That job is a good snapshot of how we work in Denton: fix the foundation first, then hang the hardware that matches how the house is actually lived in.
This matters more in Robson Ranch than anywhere else in Denton. The HOA operates a dense network of automated driveway gates per block, and the architectural standards are strict. A gate installed by an out-of-town crew with a generic black panel often fails the color spec before the first inspection even happens. The homeowner pays twice: once for the gate, then again for a compliant replacement. We quote Robson Ranch jobs against the HOA’s published finish standards from the jump, which keeps your project moving and your invoice single.
We Also Serve Cities Near Denton
We install gates throughout the surrounding area, including Corinth, Lantana, Flower Mound, and Lake Dallas. If you’re a few miles outside city limits and your gate needs attention, call us. Our Gate Installation team schedules local work by neighborhood, not by county line. Denton jobs and the small towns around it are on the same daily route.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Denton
Yes, because we quote against Robson Ranch’s published ornamental-iron style and powder-coat color standards before we order a single panel. Robson Ranch’s HOA enforces strict finish specs that have rejected more than a few out-of-town installers’ generic black gates. If you’re in Robson Ranch, tell us your lot number when you call and we’ll bring the current standard sheet to the estimate. Call (877) 610-2993 and ask for Hal; he’ll walk you through exactly what the HOA will sign off on.
Install an opener with a battery backup, which keeps the gate functioning through short outages and gives you one full cycle when the power is down. We install battery-backup operators regularly in Robson Ranch and the 55+ communities around Denton because a stuck gate is more than an inconvenience when you have a doctor’s appointment in twenty minutes. Every Fire Department access gate we install in Denton gets a backup as standard equipment.
It’s the post, almost always. A double swing gate that closes fine in August and drags in May is telling you the hinge post has shifted. The clay under Denton heaves in wet months, tilting the post just enough to throw the panel out of alignment. We fix it by resetting the post at a deeper embed with reinforced concrete, not by shimming the panel. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 and we’ll send someone who knows the difference.
Yes. Denton follows state and national entrapment protection standards for all automated gate installations, which means photo eyes, edge sensors, and a manual release are mandatory, not optional. We install UL 325 compliant operators with photo eyes and reversing edges on every automatic gate we put in a Denton driveway. If an installer says you don’t need entrapment protection, hire a different installer.
For most Denton lots, a cantilever slide gate outlasts a swing gate because it isn’t fighting a hinge post that the clay keeps trying to move. The slide gate rides on its own track structure, so when the ground shifts it doesn’t sag the same way a swing gate does. That said, a properly set swing gate with reinforced post footings still gives you fifteen to twenty years in Denton if it’s installed for this soil, not for a generic spec sheet. If you want a straight answer about what’s best for your specific driveway, call (877) 610-2993.
Get Your Denton Gate Installation Started
We’d rather talk to you on the phone than hide behind a web form, because the gate you need is specific to your driveway, your soil, and your HOA, and nobody figures that out over email. Call (877) 610-2993 for a free estimate. A live person answers 24/7. We’ll set a time to come measure, walk your property with you, and write you a price that doesn’t change at the door. No trip charge for Denton jobs inside the county. And if an out-of-town company already gave you a written estimate, bring it over; we’ll give you a free second opinion before you sign anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Denton since 2001.