Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Danvers
A new gate installation in Danvers typically costs between $1,200 and $6,800 depending on the gate type, material, and whether you’re adding automation. Most residential driveway gates in the 01923 ZIP run $2,400 to $4,200 for steel or aluminum swing gates with operators. We quote every job before we start, and the price we hand you is the price you pay. Call (877) 610-2993 and a live person answers, day or night.
Danvers is a town of two very different worlds. You’ve got centuries-old Colonials on Centre Street with hand-forged iron gates on masonry piers, and three miles away you’ve got warehouse roll-ups and slide gates along Route 1 that cycle fifty times a day. We build for both. Hal Gatewood has been doing this since 2001, and the name is on every invoice. When you call, you get the person who will show up and do the work, not a script.
Why Gatewood Fence & Gate Is Danvers’s Preferred Gate Installation Company
We work in Danvers every week. Not “we cover your area.” We’re here. Our customers on Hathorne Hill, off Kirkbride Drive, and down along Centre Street know that when a gate binds or a post heaves, the person who installed it is the person who comes back. That’s rare now.
Danvers has the only full split we know of on the North Shore: historic residential cores side by side with heavy commercial infrastructure. A national chain can’t bid a hand-forged hinge restoration on a 1750s home the same morning they spec a 40-foot cantilever slide at a distribution center. We can, because we stock for both and we’ve done both for years. The crew that shows up is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. Not a verbal “we’ll make it right.” Stamped on the paperwork.
And we answer the phone. A live person, every hour of every day. No voicemail tree, no call center three states away. You call (877) 610-2993, a person picks up. That’s how it’s been since 2001.
Our Gate Installation Services in Danvers
We install every type of gate a Danvers property needs. Some jobs are straightforward. Most around here aren’t. Here’s what we handle most, and how the specifics of Danvers change the work.
Sliding Gate
Sliding gates are the workhorse on Route 1. Warehouses, loading docks, delivery bays, and any property where a swing gate would be dangerous or impossible. A slide gate rides on a rail or cantilever system and needs flat, stable ground to travel. Danvers’s clay-heavy soil swells and shrinks with freeze-thaw cycles, so we set slide gate foundations below the frost line and grade for drainage. Otherwise the track shifts and the gate stalls mid-travel. We install Ghost Controls and Viking slide operators, and we keep common drive components stocked so a repair isn’t waiting on a freight truck from Ohio.
Swing Gate
Swing gates are the classic Danvers residential choice. They work on the older properties in town where a period look matters, and on the postwar Cape Cods and ranches that fill the neighborhoods off Maple Street. The problem in Danvers is ground heave. Clay soil freezes, expands, and knocks hinge posts out of plumb over a single winter. We set posts deeper than code requires and backfill with gravel to shed water. If you’ve got a double gate, we match the two leaves so they close square and seal the gap in the middle. No dragging, no binding, no call next March.
Pedestrian Gate
Pedestrian gates are the small ones you walk through beside the driveway or along a fence line. They get ignored until the latch stops catching or the post leans. In Danvers’s older neighborhoods, many of these were built with hand-forged hardware and custom posts that don’t match any off-the-shelf replacement part. We weld on site. If a hinge ear is cracked or a post is rotted below grade, we fix it where it stands rather than hauling the gate away. We install Gate Installation for pedestrians with the same care as a driveway gate, because a walk gate on a shared right-of-way failing is a security problem and a neighbor problem at once.
Driveway Gate
Driveway gates in Danvers fall into two camps. The first is the automated entry gate, common on larger lots and in the Avalon at Danvers complex on Kirkbride Drive. The second is the manual or semi-manual gate on the older homes, where the gate is as much architectural element as security. Both need posts that stay plumb, hinges that don’t rust out, and operators that don’t fight the grade. On Hathorne Hill especially, the terrain rises and falls in ways that make a swing gate a bad idea if the driveway slopes toward the road. We’ll tell you when a slide gate is the safer option, and we’ll spec the operator accordingly. We don’t sell you the wrong gate because it’s in stock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Danvers
We’re certified to service nine major gate brands, and for Danvers work we lean most heavily on Linear, Viking, and Ghost Controls. These operators hold up to the coastal salt air off the Danvers River and Salem Sound better than most, and their parts are readily available when something does fail. We keep common boards, remotes, and safety edges on the truck, so when we arrive for a Danvers repair, we usually finish it the same visit. No second trip because a bracket or a capacitor had to be ordered. For the historic iron gates in town, we do on-site welding and fabrication, and we’ll match new hardware to the period look of the gate without sacrificing modern safety sensors.
Common Gate Installation Problems We See in Danvers Homes
- Winter post heave on shared driveways. Danvers clay freezes deep, expands, and knocks hinge posts out of plumb. Then the gate won’t close, which blocks the neighbor’s right-of-way and starts a fight. We set posts below the frost line and backfill with gravel so this doesn’t happen every January.
- Salt-corrosion on ferrous hardware. Air off the Danvers River and Salem Sound carries salt year-round. Steel hinges, latch bolts, and operator arms rust faster than they do in Peabody or Middleton. We spec stainless or galvanized hardware on every install and treat existing iron where we can.
- Wrong gate type for the space. On Hathorne Hill and in the older parts of town, there’s often no room for a full 90-degree swing arc. A swing gate installed where only a slide gate fits will tear up operators and sag hinges. We measure the site before we recommend anything.
- High-cycle commercial operators undersized for the duty. Route 1 gates open and close fifty times a shift. A residential-grade operator won’t last a season. We install high-cycle slide operators with continuous-duty ratings and stainless rack systems for the worst of the salt exposure.
Pricing for Gate Installation in Danvers, MA
Here’s what Danvers gate work typically runs, as of late 2025.
| Gate Type | Typical Installed Cost in Danvers |
|---|---|
| Pedestrian gate, steel or aluminum | $800 - $1,800 |
| Single swing driveway gate, no automation | $1,600 - $2,800 |
| Single swing driveway gate, with operator | $2,800 - $4,200 |
| Double swing gate with automation | $3,800 - $6,500 |
| Sliding gate, residential | $2,400 - $4,600 |
| Sliding gate, commercial / high-cycle | $4,500 - $9,000+ |
Site conditions matter more in Danvers than the gate itself. Pier mounting on a brick column costs more than post mounting in soil. Underground utilities complicate the power run. A drainage correction on clay soil adds labor. Every estimate is free, it’s written, and it doesn’t change on the day of the job. We quote the number. We do the work for that number. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact price on your property.
We Also Serve Cities Near Danvers
Our crews work all over the North Shore. If you’re in Danvers and need a gate installed, we’re the local shop. We also handle gate installation in Peabody, Salem, Beverly, and Beverly Cove. Same crew, same 90-Day Done Right Promise, same live person on the phone whether we’re working in a 1750s courtyard or a Route 1 loading dock.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Danvers
Yes, a slide gate is often the right answer on shared driveways in Danvers. A swing gate can block the neighbor’s path when it’s open or mid-travel, and on narrow lots a slide gate keeps the shared access clear. We’ll verify the property line and the right-of-way language before we install, then set the track so the gate travels inside your property and doesn’t encroach. Call (877) 610-2993 and we’ll come measure.
Yes. We weld and fabricate on site, so we can repair hand-forged hinges, match new hardware to the period ironwork, and build hidden safety sensors into the posts. A few years back we replaced a pair of sagging custom iron gates at a 1750s Colonial on Page Street. The hand-forged hinge posts had rotted inside the brick piers from decades of salt air off the Danvers River. Our crew dug new footings below the clay frost line, reset the gates on modern stainless-steel hinges dressed to match the old iron, and added hidden safety photocells. The client doesn’t re-key an antique lock every spring anymore, and the gates swing true through every freeze-thaw season.
Danvers sits on clay-heavy glacial soil that holds water, freezes, expands, and pushes posts around. Every winter the ground swells upward and sideways, and a post set at the standard 24-inch depth gets forced off-plumb. We set gate posts below the frost line, which in Essex County is 42 to 48 inches depending on exposure, and we backfill with crushed stone to drain water away. A post correctly set the first time doesn’t need realignment every March. Call
Yes. The Avalon at Danvers community on Kirkbride Drive is one of the highest-volume gate service areas in the 01923 ZIP, and we’ve done enough work there to know the entry patterns. We schedule the power run and operator install around the building’s peak traffic windows, keep the gate manually operable during the work, and coordinate with the property manager so residents aren’t locked out or stalled at the entry. A typical automated gate opener install at a Kirkbride Drive condo runs $1,800 to $3,200 depending on the operator and the existing gate hardware.
A cantilever slide gate is the standard answer for Route 1 warehouses in Danvers. It needs no ground track to clog with salt and debris, it handles high cycles, and it doesn’t require the full swing arc of a traditional gate. For restricted setbacks, we’ll spec a telescoping cantilever that collapses into half the space. For loading docks with constant exposure to salt-laden air off Salem Sound, we use stainless rack-and-pinion drives and corrosion-resistant rollers. A commercial sliding gate on Route 1 typically runs $4,500 to $9,500 installed, depending on width, operator duty, and site prep. Call
If you need a gate installed, repaired, or automated in Danvers, call (877) 610-2993. A live person answers. We’ll set a time, show up, measure, and hand you a written price before any work starts. The name on the invoice is Hal Gatewood’s, and it’s been that way since 2001. No trip charge inside the county, a free second opinion on any written estimate, and the 90-Day Done Right Promise in writing on every job. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Danvers and the North Shore since 2001.Call Gatewood Fence & Gate for Gate Installation in Danvers, MA
Why Danvers Chooses Gatewood Fence & Gate
We set the standard for gate installation in Danvers.
30-60 Min Response
Fast dispatch across Danvers. Same-day and emergency service available 24/7.
Licensed & Insured
Fully certified technicians who meet all local and state licensing requirements.
Upfront Pricing
No hidden fees, no surprises. You approve the price before any work begins.
Guaranteed Work
Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.
How It Works in Danvers
Getting your gate installation handled is simple and fast.
Call or Request a Free Estimate
Tell us about your gate installation needs and we provide an upfront, transparent quote - no obligation, no hidden fees.
Licensed Technician Dispatched
A background-checked, certified technician arrives in Danvers - typically within 30-60 minutes, with parts stocked on the truck.
Problem Solved, Guaranteed
We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate installation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Danvers Customers Say
Trusted by homeowners across Danvers and surrounding areas.
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
Our Work in Danvers
A look at recent gate repair projects across Danvers and surrounding areas.
Current Offers
Bring these savings to your next appointment.
10% Off Your First Service Visit
Valid on your first completed service visit with us.
$40 Off Any Repair Over $200
Free Second Opinion on Any Written Estimate
No Trip Charge Inside Our Own County
Senior & Veteran 10% - Always
Ready for Gate Installation in Danvers?
Call now for a free estimate - or request one below. Licensed, insured, and available 24/7 in Danvers.
(877) 610-2993Request a Free Estimate in Danvers
Tell us about your gate installation needs - we'll respond within the hour.