Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Daly City, CA
Gate repair in Daly City usually costs between $180 and $680, depending on whether we’re replacing hinges, welding a rusted frame, or rebuilding a post. Most Daly City jobs get done the same day we look at them because the failures here are so consistent: salt-laden fog eats the hardware, and the Doelger row homes of Westlake share nearly identical gate configurations. Call (877) 610-2993 and you’ll get a live person who can have someone at your gate fast.
Why Daly City Homes Are Different
Daly City sits directly in the Pacific marine layer, and that’s not a poetic observation. It means near-daily fog, salt-laden moisture, and hardware that rusts at a pace you won’t see in San Bruno, let alone farther inland. The Westlake district’s Doelger-built row homes from the late 1940s and 1950s went up at industrial scale, and they share the same original side-yard gate styles, the same strap hinges, the same shallow post footings. On a single Westlake block, we regularly find the exact same hinge configuration failing in the exact same way on six consecutive houses.
The corrosion out here is so consistent that untreated hinges can fail within five to eight years. Around the 94015 and 94014 ZIP codes especially, we change out rusted hinges on almost every call. The typical Daly City gate job is a narrow 36 to 42 inch side-access pedestrian gate, not a wide driveway auto-gate installation. That changes the parts we stock, the way we weld, and the hardware we recommend. Galvanized or stainless isn’t an upsell here. It’s the only thing that lasts.
Gate Repair in Daly City
Gate repair in Daly City starts with one question: what’s the post doing? A gate sags in the hinge post, not in the middle. Around Westlake and the surrounding 94014 and 94015 blocks, the original posts went into damp, salty soil in the 1940s and 1950s, and after seventy-plus years, most of them are running on borrowed time. We quote the price before any work starts, do most repairs the same day, and fix the gate in your driveway rather than hauling it off. If your side gate won’t close, drags on the latch side, or your automatic opener trips its safety beam every time the fog rolls in, call (877) 610-2993. For a deeper look at what’s involved, see our Gate Repair page.
Electric Gate Repair
Automatic gate openers in Daly City fail in predictable ways. The control board sits in a metal housing, and Daly City’s salt-laden fog finds its way into that housing regardless of the gasket. When moisture hits the board, the safety photocell circuit trips and the gate won’t move, or worse, it reverses mid-cycle. We service LiftMaster, FAAC, BFT, Linear, and Viking operators, and we keep the common control boards and photocells on the truck so most electric gate repairs finish in one visit. A control board replacement runs $180 to $450, and we apply a $95 diagnostic fee toward the repair if you hire us the same day.
Automatic Gate Repair
A Doelger row home with an automatic swing gate operator is fighting two things at once: age and salt air. The operator arms themselves, especially on older FAAC and BFT swing units, develop internal corrosion on the worm gear and limit switch assemblies. We’ll tell you straight if the operator can be saved or if a new one makes more financial sense. An automatic gate operator repair runs $250 to $680 including parts, depending on the brand and what failed. We don’t swap parts that don’t need swapping.
Hinge & Post Repair
The most common call we get in Daly City is a side gate that drags on the ground or won’t latch. People think the gate is bent. It almost never is. The hinge post has rotted or shifted, and the gate sags in the post, not in the middle. A hinge and post rebuild on a side gate runs $350 to $600. We dig out the old post, set a new one with galvanized hardware, and rehang the gate square. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Sometimes the post is fine and the hinge leafs have simply worn, or the gate has shifted on its mountings. A realignment in Daly City usually means re-drilling hinge positions, replacing the fasteners with stainless, and adjusting the striker plate so the latch actually catches. This is one of the cheapest repairs we offer: $120 to $250 on most side gates. Weld and rust repair runs $180 to $450 depending on how much frame metal needs cutting out and patching.
How much does gate repair cost in Daly City?
Gate repair in Daly City typically runs $180 to $680 depending on scope. A hinge and post rebuild is $350 to $600, a realignment with new stainless hardware is $120 to $250, weld and rust repair is $180 to $450, and automatic operator repair is $250 to $680 including parts. Every quote is written and agreed before work begins. Call (877) 610-2993 for an exact number.
Can you come today for gate repair in Daly City?
Most Daly City gate repairs are done the same day we look at them, and our typical response in the city runs under 30 minutes because we’re already nearby most days. For a gate that won’t close or a safety beam that keeps tripping, call (877) 610-2993 and a live person answers around the clock. We’ll tell you straight when we can be there.
Gate Installation in Daly City
Gate installation in Daly City runs $650 to $2,400 for most pedestrian side gates and $2,800 to $7,500 for driveway gates with automation, depending on material, opening width, and operator. We install the gate in your driveway, not in a shop across town, and we quote the full price before any metal gets cut. The fog line here matters more than people think: hardware that would last twenty years in San Bruno can fail in seven here. For the full scope of what we build, see our Gate Installation page.
Pedestrian Gate Installation
This is the bread-and-butter job across Daly City’s Westlake district, where hundreds of Doelger-built row homes share nearly identical side-yard openings, most of them 36 to 42 inches wide. We set new posts with deeper footings than the originals ever had, then hang a gate that won’t sag in the fog. In 94015 particularly, we’re replacing strap hinges and lag bolts that rusted through well before their time. A typical pedestrian gate in Daly City runs $650 to $1,900 installed.
Driveway Gate Installation
Driveway gates in Daly City often sit on hillside lots around Southern Hills and Serramonte, where a sloped apron changes the swing clearance arithmetic. We measure for the actual slope, not a textbook flat driveway, and we build gates that clear the grade without scraping. Expect $2,800 to $7,500 for a full automatic driveway gate with operator, safety photocells, and sealed electronics. We service LiftMaster, FAAC, Viking, Ghost Controls, DoorKing, and Mighty Mule.
Sliding Gate Installation
For tighter Daly City properties where a swinging driveway gate would arc into the house or parked cars, a sliding gate is the right call. The track and rollers need to be stainless or galvanized here; painted steel rollers will bind with rust inside two years. Sliding gate installs in Daly City typically run $3,200 to $6,800 with automation, and we cut, weld, and fit the frame on site to match the exact track run.
Do you cover all of Daly City for gate installation?
Yes. We cover the entire city: Westlake, Broadmoor, St. Francis Heights, Southern Hills, Serramonte, and all four Daly City ZIP codes, 94014, 94015, 94016, and 94017. We also run adjacent jobs in Visitacion Valley and South San Francisco when a crew is already working the northern edge of the county. Call (877) 610-2993 for a free measure and written estimate.
Can you do an emergency gate replacement the same day in Daly City?
For a gate that has fallen, a pedestrian gate jammed open, or a driveway gate stuck closed with a car inside, we treat it as an emergency. Call (877) 610-2993 and a live person answers around the clock. If we have a crew near your part of Daly City, we can often get a temporary hang or brace on the same day and schedule the permanent replacement right after.
Gate Motor & Opener in Daly City
If your gate motor in Daly City has stopped responding, you’re likely dealing with one of two things: a corroded control board or a hinge post rusted through at the base. We see both constantly in the 94014 and 94015 ZIP codes. The marine layer delivers salt directly onto control board terminals, and the row-home architecture traps moisture in narrow side yards where gates never dry out. We diagnose first, then repair. For the full range of what we service, see our Gate Motor & Opener page.
Motor Installation
A new gate motor in Daly City doesn’t start with the motor. It starts with the post. The salt-laden fog off the Pacific corrodes the mounting bracket and hinge post faster than anything inland, so we check the post integrity before we bolt anything to it. If the post is sound, we install the operator, run the power, set the limits, and test the entrapment protection. A typical swing gate operator installation in Westlake runs $1,450 to $2,600. A galvanized post replacement, when needed, runs $240 to $520.
Motor Repair
Gate motor repair in Daly City is often faster than people expect because the failures here are so consistent. We see three things repeatedly: salt-air corrosion on control boards, stripped plastic drive gears inside operator housings, and limit switches knocked out of alignment by wind or a sagging gate. We carry boards and gears for LiftMaster, FAAC, Viking, Ghost Controls, DoorKing, and Elite. A typical board replacement runs $220 to $480, and a gear or limit switch repair usually lands between $180 and $390.
Linear Motor
Linear arm operators on swing gates are common in Daly City’s Doelger-era side yards where space is tight. The issue we see most is the linear actuator’s internal seals breaking down from moisture, letting fog condensation into the motor housing. Once water gets in, corrosion follows fast. A replacement linear arm for a 36 to 42 inch gate in Westlake or Broadmoor typically runs $520 to $980 installed, including the arm, mounting hardware, and safety check.
Can you retrofit safety photocells to a narrow Westlake side gate?
Yes. A 36 to 42 inch opening is tight for standard photo-eye mounting, but it’s doable. We fabricate custom brackets on site so the photo-eyes sit at the correct height and angle without interfering with the gate swing. A photocell pair installed and aligned for a narrow Westlake side gate runs $160 to $310. Call (877) 610-2993 for an exact quote.
Why do gate operators fail faster in the 94014 and 94015 ZIP codes?
Daly City sits directly in the Pacific marine layer, so the fog here is denser, wetter, and saltier than what most of San Francisco gets. Control boards corrode at the terminals, steel housings rust, and motor seals degrade. In 94014 and 94015 especially, the row-home architecture traps moisture in narrow side-yard passages where gates don’t get sun or airflow to dry out. That’s why the failures repeat block after block.
Gate Access Control in Daly City
Gate access control in Daly City usually comes down to one of three jobs: retrofitting keypad entry onto an older Doelger side gate, replacing a corroded control board on a legacy opener, or adding phone or card entry to a gated driveway. Most of the work we do here is repair-first, and most of it ships same-week, because we keep the common Linear, DoorKing, and Viking boards and stainless hardware on the truck. For the full breakdown, see our Gate Access Control page.
Keypad Entry
We install and repair keypad entry on side gates, driveway gates, and pedestrian gates throughout Daly City, including 94014 and 94015. On a late-1940s Doelger side gate in Westlake, a new LiftMaster or Linear keypad with stainless hardware is usually a one-visit job. The bigger question is whether the gate itself still hangs square. Keypad entry installation runs $380 to $650. We fix the hinge post first, because a keypad mounted on a sagging gate will misalign the strike plate and eat the code reader’s batteries within months.
Phone Entry
Phone entry systems let you open the gate from your cell phone, which is useful in Daly City’s hilly neighborhoods where the gate sits below the house and you don’t always hear the intercom. We install and service phone entry modules that integrate with existing operators, including older DoorKing and Viking units. Phone entry installation in Daly City generally runs $500 to $900, depending on the operator and whether we’re replacing or adding the module.
Card Reader
Card readers are more common on multi-unit properties, but we see them on Daly City homes that want simple tap-to-open for deliveries or caregivers. We install and repair proximity readers, and we can tie them into existing access control systems or set them up as a standalone. Card reader installations in Daly City typically run $450 to $800 per entry point. We’ll tell you honestly whether the reader can be retrofitted or whether the control board is too far gone.
Can I add keypad entry to my 1950s Westlake gate without replacing the whole operator?
Usually yes. If the operator is a legacy Linear or DoorKing unit still holding a charge, we can often retrofit a keypad module and stainless strike plate onto the existing frame. The deciding factor is whether the control board still supports external triggers. We test that on-site before quoting anything. Call (877) 610-2993 for a free estimate.
Is a solar gate opener practical in foggy Daly City?
Not reliably. Daly City’s marine layer blocks direct sun for large parts of the year, especially in the 94014 and 94015 ZIP codes where the fog sits longest. A solar panel that works in San Francisco’s Mission District may never fully charge a battery in Westlake. For most Daly City gates, a hardwired low-voltage run is the dependable choice, and we handle that as part of any automated gate access job.
Gate Parts & Welding in Daly City
When a gate hinge snaps in Daly City, it’s rarely a surprise. It’s rust. The marine layer that rolls over the Westlake district and down into the 94015 ZIP sits on your hardware night after night, and salt-laden fog does to a steel hinge what a decade of rain couldn’t. We handle hinge replacement, post replacement, rail repair, and custom welding across Daly City with parts already on the truck for most Doelger-era side-yard gates. For the full scope, see our Gate Parts & Welding page.
Hinge Replacement
Daly City side-yard gates, especially the original strap-hinge setups on Westlake row homes, fail at the hinge first. The bottom hinge collects moisture, the plate rusts through, and the gate drops. We carry galvanized and stainless hinge stock specifically because untreated steel doesn’t survive long six blocks from the ocean. A typical hinge replacement in Daly City runs $140 to $280 per gate, including aligning the gate back to square.
Post Replacement
When the hinge post rots at the base or the lag bolts have nothing left to bite, replacing the hinge is only half the job. In Daly City’s fog belt, we regularly dig out posts that look fine above ground and are gone below. Post replacement here runs $380 to $720 depending on whether it’s set in concrete, the soil condition, and whether the post is powder-coated steel or wood. We quote the full price before any work starts, and that number doesn’t move.
Rail Repair
Welding a cracked rail or straightening a sagging welded frame is work we do on site, in your driveway, not back at a shop after hauling the gate off. For Daly City gates with the original thin-wall tube frames, rail repair typically runs $180 to $400. If the metal is too thin to weld cleanly, we’ll tell you before striking an arc, not after. Custom welding jobs run $250 to $700 depending on the scope of fabrication.
Is there an emergency gate parts service in Daly City?
Yes. We answer calls 24/7 and prioritize gates that won’t latch, won’t close, or have visible weld fractures. For urgent hinge, latch, or weld failures in Daly City, we typically arrive within the same day, often within a few hours. Call (877) 610-2993 any hour and a live person answers, not a voicemail tree.
What kind of warranty do you offer on gate welding in Daly City?
Every gate parts and welding job in Daly City carries our 90-Day Done Right Promise in writing. If the weld fails or the part we installed doesn’t hold, one call brings Hal back at no charge. No hedging, no runaround. Call (877) 610-2993 for an exact quote before you decide anything.
Brands We Service in Daly City
We service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common control boards, photocells, and remotes in local stock so most Daly City repairs don’t wait on parts. See our brands for the full list.
Pricing for Gate Repair in Daly City, CA
| Service | Typical range in Daly City |
|---|---|
| Gate realignment with stainless hardware | $120 – $250 |
| Hinge replacement per gate | $140 – $280 |
| Weld and rust repair | $180 – $450 |
| Control board replacement | $180 – $450 |
| Rail repair | $180 – $400 |
| Custom welding | $250 – $700 |
| Hinge and post rebuild | $350 – $600 |
| Post replacement | $380 – $720 |
| Keypad entry installation | $380 – $650 |
| Automatic gate operator repair | $250 – $680 |
| Pedestrian gate installation | $650 – $1,900 |
| Driveway gate with automation | $2,800 – $7,500 |
What pushes the price up in Daly City is the condition of the post and the amount of rust already in the frame. The older the house, the more likely the post itself needs to come out. Every price is quoted and agreed before any work begins, and the number you sign is the number you pay.
Neighborhoods We Serve in Daly City
We work all over Daly City, and most calls come from the coast side where the fog is thickest. Our typical response across the city runs under 30 minutes from the time you call, because we’re already nearby most days.
- Westlake
- Crocker
- Broadmoor
- St. Francis Heights
- Southern Hills
Service Area - Cities Near Daly City
We serve Daly City, CA and the surrounding Peninsula and San Francisco neighborhoods. If you’re just west in Visitacion Valley, CA or south in South San Francisco, CA, we can usually get to you the same day. We also run jobs in Noe Valley, CA, the Mission District, CA, and San Bruno, CA when crews are already in the area.
Serving Daly City, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Daly City and the communities around it; dispatch is coordinated from our San Francisco Bay Area office. The map shows the Daly City coverage area; if your address is on it, we can help.
Also serving nearby: Daly City, CA, Visitacion Valley, CA, South San Francisco, CA, Noe Valley, CA, Mission District, CA, San Bruno, CA.
FAQs About Gate Repair in Daly City
We answer calls 24/7, and our typical response in Daly City runs under 30 minutes because crews stage locally and dispatch from our San Francisco Bay Area office. A gate that won’t close is a security issue, so we treat it as one. Call (877) 610-2993 and a live person will tell you exactly when someone can be there.
Most gate repairs, hinge replacements, and post resets don’t require a permit in Daly City. New driveway gates with automation sometimes do, depending on electrical work and height. We’ll tell you during the estimate whether your job needs one, and we handle the paperwork if it does. Call (877) 610-2993 to talk it through.
Daly City sits directly in the Pacific marine layer, so the fog here is denser, wetter, and saltier than what most of the Peninsula gets. Hardware that would last twenty years in San Bruno can fail in five to eight here, especially on untreated original Doelger hardware in the 94014 and 94015 ZIP codes. That’s why we spec galvanized or stainless on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Daly City Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth