Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Coral Terrace
Gate installation in Coral Terrace usually runs between $1,800 and $6,500 for a complete driveway gate with operator, and most jobs take one to three days once materials are on site. We work Coral Terrace regularly and know what these 1950s and 1960s CBS pillar lots actually require. If you’re on a shared driveway off SW 24th Street or a compact lot near Coral Way, call (877) 610-2993 and Hal Gatewood will tell you straight what your gate needs, what it will cost, and when we can start.
Why Gatewood Fence & Gate Is Coral Terrace’s Preferred Gate Installation Company
Hal Gatewood has been running this shop since 2001, and his name is on every invoice. That matters in Coral Terrace, where most homes are CBS ranch houses on tight lots with masonry perimeter walls and iron gates that have been standing since the Johnson administration. We’re not a franchise rolling through town. The person who answers your call is the same person who shows up to measure.
Our crews know the streets here. We have replaced rusted hinge posts off SW 16th Street, converted swing gates to slide gates on shared driveways near Flagami, and fixed pillar anchors where the block had cracked behind the hinge plate. We have also seen what happens when an out-of-area company hangs a new gate on a post that was already failing. Six months later, the gate sags again and the installer is gone. We build for the specific conditions on your lot.
Every installation carries our 90-Day Done Right Promise in writing. If the gate isn’t right, one call brings Hal back. No runaround. And our office is staffed by a live person 24 hours a day. You won’t get a voicemail or a call queue.
Our Gate Installation Services in Coral Terrace
Driveway Gate
Driveway gate installation in Coral Terrace starts with the pillars. On most of these 1950s and 1960s CBS lots, the original anchor bolts have been rusting inside the block for decades, and the block often micro-fractures around the bolt head. We check that first. Then we set new anchors or rebuild the pillar core, hang the gate, and mount the operator. Prices start around $1,800 for a basic single swing gate and run to $6,500 for a double gate with a premium operator like a FAAC or BFT.
Pedestrian Gate
A Coral Terrace pedestrian gate is usually ornamental iron on a narrow walkway between the house and the perimeter wall. These get heavy use, and the hinges take a beating from salt air and daily slamming. We install self-closing pedestrian gates with adjustable tension and hardware that resists the corrosion this neighborhood’s coastal air causes. Typical pedestrian gate installation runs $600 to $1,400 including hardware.
Sliding Gate
Sliding gates are often the right answer in Coral Terrace, especially on shared driveways where two households need access and a swing panel would block one side. We install cantilever and track-style slide gates, and we always check the driveway slab for salt-corroded rebar that causes uneven settling. A slide gate with a Viking or Linear operator installed runs $3,200 to $6,200 here depending on gate width and track condition.
Swing Gate
Swing gate installation in Coral Terrace usually means either replacing a rusted original frame or converting a manually operated pair into an automated system. The catch is that the CBS pillars have to actually hold. We won’t hang a 300-pound automated swing panel on a pillar with cracked block. Reinforcing or rebuilding the pillar is part of the job when it’s needed. Automated single swing systems start about $2,400 in this neighborhood.
We also install Gate Installation systems with loop detectors, keypads, and intercom-style access without making a major undertaking out of it. A full setup with safety photocells and a battery backup is usually quoted before we start, so you know the number.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Terrace
We install and service operators from FAAC, BFT, Linear, and Viking, among others. Hal keeps a rolling stock of common parts for these brands at the shop so a Coral Terrace job doesn’t stall waiting on a three-day shipment. If your existing operator still has life in it, we’ll tell you. We don’t swap parts that don’t need swapping, and that applies to brand-new installs too.
Common Gate Installation Problems We See in Coral Terrace Homes
- Original swing gates sagging on 1960s CBS pillars. The anchor bolts have rusted and expanded inside the block, cracking the core. No new gate will hold until the pillar is stabilized. We fix the masonry first, then hang the iron.
- Slide gate tracks laid over old driveway slabs. Salt-corrosion in the rebar causes the slab edges to settle unevenly, so the track jams and the rack and pinion skips. We level and shim properly before setting the track.
- Shared driveway loop detectors. On Coral Terrace’s shared right-of-way driveways, the loop placement has to be coordinated with both households. If it’s off by a foot, one car never triggers the opener. We have corrected that mistake for more than one frustrated neighbor here.
- Rusted hinge plates where the iron meets masonry. The hinge side of a Coral Terrace gate lives in a salt humid microclimate. We use stainless and galvanized hardware with proper standoff so the plate doesn’t trap moisture against the block.
Pricing for Gate Installation in Coral Terrace, FL
Here are honest starting points for the Coral Terrace market. A pedestrian gate runs $600 to $1,400. A single driveway swing gate with a basic operator starts around $1,800 to $2,400. Automated double swing gates run $3,500 to $6,500. Slide gate installations run $3,200 to $6,200 depending on track bed condition and gate width. Security gates with reinforced frames and access control hardware add $800 to $2,000 more. The price is quoted and agreed before any work begins, and we honor it. Senior and veteran discounts apply. Call (877) 610-2993 and we’ll set up a time to look at your pillars, your slab, and your access pattern, then give you a written number.
We Also Serve Cities Near Coral Terrace
Beyond Coral Terrace, our teams regularly install gates in Flagami, West Miami, Westchester, and Glenvar Heights. If you’re in one of those neighborhoods, the same people and the same promise apply. See more about Gate Installation in Coral Terrace or call us directly and we’ll point you to the right page.
Coral Terrace Gate Installations Start With the Pillars, Not the Gate
Coral Terrace is a dense Cuban-American residential enclave in Miami-Dade where ornate wrought-iron “reja” style driveway and pedestrian gates on CBS masonry pillar enclosures are effectively universal. They’re not a luxury add-on. They’re on nearly every lot, and most of them have been there for fifty or sixty years. That means gate installation here is rarely just bolting new iron onto old block. The original 1960s and 1970s anchor bolts set into the pillar cores have rusted and expanded, often micro-fracturing the surrounding block. The visible problem is a sagging gate that won’t latch. The actual problem is the pillar anchor failing. So we start with masonry stabilization, then we save or replace the iron as needed. This is the specific way gate work gets done in Coral Terrace, and it’s why a company that mostly works newer suburban developments gets it wrong here.
This page exists because Coral Terrace has conditions no other neighborhood in Miami-Dade deals with in quite the same combination. Lots are compact. Driveways are often shared. Perimeter walls run right to the property line. And because Miami-Dade is one of only two counties in Florida designated a High Velocity Hurricane Zone, any gate repair or replacement here must comply with Miami-Dade Notice of Acceptance product approvals. That’s a standard Broward and Monroe counties don’t enforce, and plenty of out-of-area contractors don’t know it until an inspector fails their work. We know it before we quote.
The Coral Terrace Slide Gate We Installed on a Shared Driveway
On a shared driveway off SW 24th Street, our crew replaced a rusted double swing gate with a slide gate because the hinge posts were too far gone to support a swing panel without rebuilding the pillars. We set new post footings, installed a LiftMaster operator with a safety photocell, and kept one pedestrian gate working the whole time so the two households never lost access. That’s the kind of job Coral Terrace throws at you, and it’s the kind we do without drama.
Serving Coral Terrace, FL - Our Local Coverage Area
We’re based in the Coral Terrace area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Coral Terrace
Yes. Miami-Dade County requires product approvals for gates and operators installed in the High Velocity Hurricane Zone, and Coral Terrace is inside that zone. The gate frame, hinges, and any automated operator component must meet Miami-Dade NOA standards for wind load. We pull and verify the approvals before installation, and we’ll show you the paperwork. Call (877) 610-2993 if you’ve been told otherwise and want a second look.
In most Coral Terrace homes, the pillar is the problem, not the gate. The original anchor bolts rusted and cracked the CBS block behind the hinge plate. We assess the pillar core first. If the pillar can be stabilized, we save the gate and replace the anchors and plates. If the block is too far gone, we rebuild the pillar and rehang the gate. Either way, the fix starts before the iron work.
Yes, and it’s often the best option for two-household access. A sliding gate doesn’t swing into either driveway side, so both cars can come and go without coordinating gate position. We handle the loop detector placement so both households trigger the opener reliably, and we set the track on a leveled bed so it doesn’t jam after the first heavy rain. Call (877) 610-2993 for a free measure.
Coral Terrace sits within 12 to 15 miles of Biscayne Bay and the Atlantic, so salt-laden humidity attacks iron frames, hinges, and operator hardware year-round, not just at the beach. We use stainless and galvanized hardware, powder-coated frames, and sealed operator enclosures on every install here. Standard zinc hardware lasts about half as long in this air. For a quote on a properly protected gate, call (877) 610-2993.
Yes. We sequence the work so at least one pedestrian access point stays operational the entire time. For the shared driveway job off SW 24th Street, we kept a pedestrian gate working while the driveway gate was down and the new slide track was setting. If you need to keep walking access during a full replacement, tell us during the estimate and we’ll plan for it.
Call Gatewood Fence & Gate for Coral Terrace Gate Installation
If you’re in Coral Terrace and your gate is sagging, rusted, or just not working the way it should, call (877) 610-2993. Hal will talk through what you’ve got, what it needs, and what it will cost before anyone shows up. Estimates are free. The 90-Day Done Right Promise is in writing. A live person answers the phone 24 hours a day. You can also request a free second opinion on any written estimate from another company. We’ve been doing this since 2001, and the name on the shop is the name on the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coral Terrace and the surrounding Miami-Dade communities.