Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Coral Gables
Gate installation in Coral Gables runs between $2,800 and $11,500 for most residential jobs, depending on whether you’re anchoring into coral rock pilasters, running power to a new operator, or matching a 1920s Merrick-era wrought iron design. We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001, and we’ve worked on gates from Alhambra Circle to the Granada golf course. Hal Gatewood’s name is on the shop, his address is published, and his crew does the work in your driveway, not hauled off to some warehouse. If you’re planning a new driveway gate or replacing one that salt air has eaten alive, call (877) 610-2993 and talk to a person who actually installs gates here.
Key takeaways for Coral Gables homeowners:
- Any gate replacement or significant alteration needs Board of Architects approval first. We handle the permit navigation.
- Salt air from Biscayne Bay corrodes standard hardware in 3-5 years. We spec stainless steel and galvanized components that actually last on the coast.
- Coral rock pilasters crack if you over-torque a lag bolt. Our crews know how to anchor into oolitic limestone without a mason sub.
- Every job carries the 90-Day Done Right Promise, in writing, signed by Hal.
Why Gatewood Fence & Gate Is Coral Gables’s Preferred Gate Installation Company
We’re not a franchise with a call center three states away. When you call (877) 610-2993, a live person answers. Every time. That matters in Coral Gables because gate work here is never just a gate: it’s a Board of Architects submittal, a coral rock pilaster that might be load-bearing, a rust pattern only someone who has worked Merrick-era estates would recognize on sight. Hal has been fixing gates since 2001, and he gets genuinely annoyed when he finds sloppy work somebody else left behind.
Coral Gables customers call us because we show up in the window we promised, we quote a price before any work starts, and we don’t change that price at the door. No haggling, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you want to see who you’re dealing with, drive to the shop and look Hal in the eye. His license number is published. You can verify it.
Our crews serve Coral Gables residents directly, with scheduling coordinated from our South FL office. Background-checked, uniformed people on every job. Certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And we weld on site, which means your gate stays in your driveway where you can see exactly what’s being done.
Our Gate Installation Services in Coral Gables
Driveway Gate Installation
Driveway gates in Coral Gables are often anchored into George Merrick-era coral rock walls or limestone columns, and the anchoring is where most installers go wrong. A typical driveway gate installation here runs $4,200 to $11,500, including operator, safety edges, and Board of Architects review coordination. We set posts with minimally invasive epoxy or stainless lag shields into oolitic limestone, never raw lag bolts that fracture the stone.
Pedestrian Gate Installation
Pedestrian gates in Coral Gables often match an existing driveway gate or a historic wrought iron fence line. Expect $1,800 to $4,000 for a custom or semi-custom pedestrian gate with proper rust-resistant hinges and a self-closing mechanism. If the gate serves a pool area, local code requires self-closing and self-latching hardware. We spec that every time.
Sliding Gate Installation
Sliding gates are common on smaller Coral Gables frontages where a swing gate’s arc would block the sidewalk or the driveway. A sliding gate install typically runs $3,500 to $9,000 including track or cantilever hardware, operator, and rack and pinion. The salt air near Biscayne Bay chews through cheap track rollers fast, so we use sealed bearings and stainless hardware that will survive more than two summers.
Swing Gate Installation
Swing gates are what we install most on Merrick-era estates and 1970s and 80s infill homes throughout Coral Gables. A double driveway swing gate with operators runs $5,500 to $12,000. The hinge post is where everything starts: a gate sags in the hinge post, not in the middle, and that’s where we start. If the post has corroded inside a coral rock pilaster, we repair the post first. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Gables
We install and service gate operators from FAAC, BFT, Linear, and Viking, among others. If your Coral Gables gate already has an operator from one of these brands, we can often reuse the working components and replace only what’s failed. That’s the repair-first approach: Hal fixes the gate in your driveway rather than swapping parts that don’t need swapping. We keep common parts stocked locally for Coral Gables customers, so a replacement board or limit switch doesn’t mean waiting on a backorder from a distributor in another state.
Common Gate Installation Problems We See in Coral Gables Homes
- Salt air corrosion on hinge pins and operator motor housings. Within 3 to 5 years, standard galvanized hinges rust enough to bind a swing gate or make a slide gate jump the rack and pinion. We install stainless steel hinges and coated motor housings from day one.
- Over-torqued lag bolts splitting coral rock pilasters. Oolitic limestone is structurally fragile in ways poured concrete isn’t. A lead anchor or raw lag bolt driven too hard fractures the stone, and suddenly you need a mason before the gate can be rehung. We use stainless lag shields and low-torque setting methods.
- Hurricane-season power outages with no manual override. Every June through November, residents discover their swollen, rust-seized gate can’t be manually released during an outage. We install operators with functional manual release mechanisms and test them before we leave.
- Board of Architects rejections. Coral Gables enforces one of Florida’s most rigorous municipal architectural review processes. A modern aluminum panel or white vinyl operator housing that would sail through in South Miami gets rejected here. We coordinate the submittal and source period-appropriate hardware before installation.
Pricing for Gate Installation in Coral Gables, FL
Here’s what you can actually expect to pay in Coral Gables, based on jobs we’ve done recently:
| Service | Typical Coral Gables Range |
|---|---|
| Pedestrian gate, new install | $1,800 - $4,000 |
| Single driveway swing gate with operator | $4,200 - $8,000 |
| Double driveway swing gate with operators | $5,500 - $12,000 |
| Sliding driveway gate with operator | $3,500 - $9,000 |
| Security gate with access control integration | $5,000 - $14,000 |
Every price is quoted and agreed upon before any work starts. The price we quote over the phone or on site is the price you pay. If the Board of Architects requires a design revision, we’ll tell you what that costs before we resubmit. Standing offers: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Call (877) 610-2993 for an exact quote on your Coral Gables gate.
We Also Serve Cities Near Coral Gables
We serve Coral Gables daily, including the neighborhoods off Alhambra Circle, Granada Boulevard, and Ponce de Leon. We also handle Gate Installation in Coconut Grove, Glenvar Heights, South Miami, and Coral Terrace. If you’re just outside Coral Gables proper, call and ask: the same crew that works Coral Gables probably covers your street.
Serving Coral Gables, FL - Our Local Coverage Area
We’re based in the Coral Gables area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Coral Gables
Yes, if your gate replacement or significant alteration is visible from the street or affects the home’s Mediterranean Revival character, Board of Architects approval is required before work begins. We handle the submittal, the drawings, and the inspections. Call (877) 610-2993 and we’ll tell you upfront whether your project triggers review.
Coral Gables sits just inland from Biscayne Bay, and salt-laden air accelerates oxidation of ferrous gate hardware, hinges, and operator motor housings much faster than inland suburbs like Glenvar Heights or Coral Terrace experience. Standard galvanized hinges fail here in 3 to 5 years. We spec stainless steel hinges, coated motor housings, and marine-grade fasteners for any gate within a mile of the water.
In most cases, yes, but the anchoring method is different from a poured-concrete pillar. Slide gates on coral rock walls usually need a separate steel post or footing set adjacent to the wall, because anchoring the track directly into oolitic limestone risks fracturing the stone under repeated gate movement. We’ll evaluate your wall and tell you exactly what’s needed.
Every swing and slide gate operator we install includes a manual release mechanism, typically a keyed release or a pull handle accessible from outside the gate. We test it before we leave every job. If your current gate doesn’t have a working manual release, call (877) 610-2993 and we’ll add one before the next storm season. A rust-seized gate with no manual release can trap you on your property when the power goes out.
New gate operators in Coral Gables must include safety photocells monitoring the gate’s path, a reversing edge or contact sensor, and compliance with UL 325 entrapment standards. We install photocells and safety edges on every automatic gate we put in, and we test them with a gauge before we call the job done. This isn’t optional, and we don’t treat it as an add-on.
We recently installed a new wrought iron driveway swing gate on a 1920s Merrick-era estate off Alhambra Circle, where the original hinge post had corroded inside the coral rock pilaster. Our crew used stainless steel lag shields and set the new post footing with a minimally invasive epoxy to avoid fracturing the oolitic limestone, then wired a LiftMaster gate operator with safety photocells and a loop detector, all before the Board of Architects inspection. That’s the kind of job you only get right if you’ve done it in Coral Gables enough times to know what the stone will tolerate.
Call Gatewood Fence & Gate for Coral Gables Gate Installation
You can drive to the shop and look Hal in the eye, or call (877) 610-2993 and talk to a live person right now. Free estimates, upfront pricing agreed before work starts, and the 90-Day Done Right Promise in writing on every job. If it’s not done right, Hal comes back. One call, no runaround.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, proudly installing gates across Coral Gables and South Florida.