Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Compton
A new gate installation in Compton typically runs $2,800 to $6,500 for an automated driveway gate, with pedestrian gates starting around $900 and sliding gate setups landing between $3,200 and $7,400 depending on track work and operator choice. Most Compton jobs are scheduled for measured, written quotes rather than same-day installs, because good gate work means ordering the right steel, welding on site, and setting posts in concrete that cures properly. Gatewood Fence & Gate has been at this since 2001, and when you call (877) 610-2993, a live person answers, day or night.
If you live off Rosecrans, Alondra, or anywhere in the 90220 through 90223 ZIP codes, you already know what the marine layer does to metal. We do too. That’s why the steel, hinges, and operators we spec for Compton properties are chosen for salt-moisture survival, not brochure photos. You get a gate that cycles clean for years, not one that starts binding after two seasons.
Key Takeaways for Compton Homeowners
- Galvanized posts and stainless hinges are a baseline spec in Compton, not an upgrade.
- Sliding gates on ground tracks need track cleaning and wheel kits bundled with operator work, or the new motor dies early.
- Every quote is written, priced before work starts, and covered by our 90-Day Done Right Promise in writing.
- Seniors and veterans get a permanent 10% discount on every job, and any repair over $200 drops $40.
Why Gatewood Fence & Gate Is Compton’s Preferred Gate Installation Company
Hal Gatewood put his name on the shop in 2001, and his crew has been welding gates right in driveways across Compton ever since. We’re not a dispatch hub. The person who quotes your gate is the person who builds it, and the person who builds it will come back if anything’s not right. That’s the whole promise.
Compton’s housing stock is mostly post-WWII single-family homes built between the 1940s and 1960s. Those lots have poured-concrete pillars and masonry posts that are now 60 to 80 years old. Anchor bolts inside those posts are frequently rusted solid or snapped. A lot of companies will talk you into replacing the whole gate when the real problem is the bracket buried in the post. We cut out the old hardware, weld in a stainless post footing, and hang the gate plumb. That’s a repair-first approach, and it’s why Compton customers call us back when they need a new gate on a different side of the house.
Our scheduling for installation work in Compton runs on measured, written timelines because gate installs involve concrete, steel, and operator wiring that can’t be rushed. You get a firm date, a firm price, and a gate done right. Estimates are free, and we’ll come out and measure without charging a trip fee anywhere inside the county.
Our Gate Installation Services in Compton
Driveway Gate Installation
Most Compton driveways are built for sliding or swing gates on modest setbacks, and the security culture here means automated driveway gates are near-universal on single-family lots. These aren’t curb-appeal projects, they’re the first line of defense. We install driveway gates with operators, safety edges, photocells, and keypads, sized to your actual opening and your actual vehicle clearance. A typical automated driveway gate in Compton runs $3,800 to $6,800 installed, including the operator and safety equipment.
Pedestrian Gate Installation
Pedestrian gates on Compton lots see heavy daily use, often in side yards off Alameda or along the 90221 corridor. We frame them in galvanized steel, hinge them with stainless hardware, and set posts below grade with concrete that holds against Santa Ana gusts. A new steel pedestrian gate with hardware and installation starts around $900 and goes up based on width, height, and whether you want a keyed lock, keypad, or intercom tie-in.
Sliding Gate Installation
The dominant gate type across Compton’s residential blocks is the rubber-wheeled sliding gate riding a ground track. That track sees abuse from gritty driveway runoff, blown sand, and cracked asphalt. When we install a sliding gate, we build the track bed right, set the rack and pinion in galvanized steel, and often include a track box so the channel stays clear. Sliding gate installs in Compton typically land between $3,200 and $7,400 depending on gate length and operator type.
Swing Gate Installation
Swing gates on Compton properties are usually hung from those 60-year-old masonry posts. The failure point is almost always the post bracket, not the gate leaf itself. We pour new footings where needed, install stainless hinges and brackets, and set operators that won’t fight a sagging post. A paired double swing gate with operators for a wide Compton driveway usually runs $5,000 to $9,500 installed, including entrapment protection and controls.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Compton
We install and service operators from DoorKing, Viking, Ghost Controls, and Elite, and we keep common parts for those brands on our trucks when we head into Compton. That means a failed control board or a stripped drive gear doesn’t leave you waiting a week for a warehouse order. On a 1950s single-family lot off Rosecrans Avenue, we installed a Viking sliding gate operator on a rubber-wheeled track after replacing the original hinge post anchors with stainless steel footings and a galvanized rack and pinion. The old loop detector had corroded into failure, so we added a safety photocell pair across the driveway instead. That gate has been cycling cleanly through Compton’s marine-layer mornings without sag correction calls.
Our Gate Installation crew works on all nine major brands we carry, and if your existing opener is from another manufacturer, we’ll tell you straight whether it’s worth repairing or better to replace. The name on the shop means we don’t upsell you into a new operator when a $40 gear kit would do the job.
Common Gate Installation Problems We See in Compton Homes
- Salt-moisture corrosion on hinge pins and latch strikes. Compton sits 12 to 15 miles inland but squarely in the marine-layer corridor, so hardware gets a nightly salt-moisture film followed by afternoon sun. Uncoated iron pins and strikes corrode within two to three years, binding the gate and forcing motors to work against resistance until they burn out.
- Santa Ana wind damage to swing gates on old masonry posts. Fall and winter Santa Ana events slam unlatched swing gates against 60-year-old poured-concrete footings. Lag bolts shear, posts crack, and the gate suddenly hangs crooked. That’s a post bracket replacement job, not a hinge adjustment.
- Track channel fouling on sliding gates. Crumbling driveway asphalt and blowing grit pack rubber-wheeled track channels tight across Compton. The operator keeps working against a jammed rack and pinion until the motor overheats. We quote track cleaning and wheel-kit replacement as a bundled job, because a motor-only fix on a fouled track fails again within weeks.
- Deferred maintenance from years of rental occupancy. A high proportion of Compton’s post-WWII homes have shifted to rental status, which means gates get ignored until they stop opening. By the time we’re called, the gate has often been dragging or grinding for years, and the operator is toast. We see this constantly, and we fix the whole system, not just the symptom.
Pricing for Gate Installation in Compton, CA
| Service | Typical Compton Price Range |
|---|---|
| Pedestrian gate (steel, installed) | $900 - $2,200 |
| Single driveway swing gate + operator | $2,800 - $5,200 |
| Sliding gate + operator (ground track) | $3,200 - $7,400 |
| Double swing gate + dual operators | $5,000 - $9,500 |
| Security gate with access control add-on | $6,000 - $11,000 |
These ranges cover materials, hardware, operator, safety edges, and labor for typical Compton lots. Things that shift the number: gate length and weight, whether we’re pouring new footings or reusing sound posts, the operator brand, and whether you want keypads, intercom, or camera tie-ins. Every Compton quote is written and agreed before any work starts. No re-quotes at the door. Call (877) 610-2993 for a free measure and a written price.
Why Galvanized Steel and Stainless Hardware Matter in Compton
Compton’s 90220-90222 ZIP codes sit in the marine-layer corridor, which means every night brings a fine salt-moisture deposit onto everything metal in your yard. Morning sun bakes it on. Over a few seasons, uncoated iron and painted steel hinge pins, latch strikes, motor brackets, and rack-and-pinion teeth corrode up to three times faster than the same hardware in inland cities like Ontario or Fontana. Galvanized steel posts and stainless steel hinges are not a premium spec here. They’re the floor. Painted steel alone fails within a few seasons, and then you’re calling us anyway, just with a bigger problem and a dead operator to show for it.
This is the core of what we do differently in Compton. We don’t hang a cheap painted gate off old corroded anchors and collect the check. We cut the rust, weld fresh stainless hardware, and set posts in concrete mixed for this neighborhood’s soil and moisture. If you’re spending money on a new gate, you should only spend it once.
We Also Serve Cities Near Compton
If you’re across the line in East Rancho Dominguez, West Rancho Dominguez, Carson, or Gardena, you’re still in our service area and still covered by the same pricing, promise, and local parts stock. The marine layer doesn’t stop at the city limit, and neither do we. Call us and we’ll measure, quote, and schedule just the same.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Compton
Compton sits slightly inland from those beach cities but still inside the marine-layer corridor, so nighttime salt moisture condenses on metal surfaces and bakes in under strong afternoon sun. That repeated cycle attacks uncoated iron hinge pins and latch strikes year-round. The fix is stainless steel hinges and galvanized hardware from day one. Call (877) 610-2993 and we’ll spec it right the first time.
Yes. Solar gate openers work well in Compton’s climate because you get consistent sun outside the morning marine layer. We install solar operators from brands like Ghost Controls and Viking, usually paired with a battery bank sized for heavy daily cycling. For a Compton driveway gate that cycles 20 or 30 times a day, a properly matched solar kit is reliable and avoids running conduit across old concrete.
Usually it’s both. Compton’s older driveways shed asphalt grit and blowing sand straight into the ground track, and once the channel packs tight, the motor works against resistance until it overheats. We replace worn rubber wheels, rebuild the track bed, and often install a track box or drainage channel so the problem doesn’t return in a month. A motor-only fix on a fouled track is a waste of your money.
Yes. California law and UL 325 standards require entrapment protection on any new automatic gate, and we install it as standard: photocells across the opening, reversing edges on the gate leaf, and proper force settings. This is not an optional add-on. Safety edges and sensors are part of every automated gate job we quote in Compton, and we’ll show you exactly where they go before work begins.
With galvanized hardware, stainless hinges, and a properly matched operator, expect 10 to 15 years from a quality unit like DoorKing or Viking in Compton. Cheap painted-steel operators or oversized motors on undersized tracks die in three to five years from corrosion and strain. The 90-Day Done Right Promise covers our workmanship, and the warranty on the operator comes from the manufacturer. We’ll make sure you get the right spec. Call (877) 610-2993 for a free measure and a written quote.
Get Your Compton Gate Installed Right
You’ve got one gate. It’s got one job: keep your people in and everyone else out. When you want it done right, call Hal Gatewood and his crew at (877) 610-2993. A live person answers, and you can drive to the shop and look any of us in the eye. Free estimates, written pricing before work starts, and a 90-Day Done Right Promise on every job. Seniors and veterans save 10% permanently, and any repair over $200 drops $40 off the top. The name is on the shop, and the shop is down the road from Compton. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Compton and the surrounding communities since 2001.