Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Commack
Gate installation in Commack typically runs $2,400-$7,800 for a driveway gate with an automatic opener, and we can usually start within 10-14 days of your free measure. If you’re on a quarter-acre lot off Jericho Turnpike or up near the high school, you’re dealing with the same thing we’ve seen for years: posts frost-heaved out of plumb, corroded hinges, and gates that stopped meeting code before your kids were born. We know Commack’s permitting process under the Town of Smithtown, we know the housing stock, and we know what a Long Island winter does to a 50-year-old post footing. Call (877) 610-2993 and Hal will answer. Not a voicemail tree. Him.
Key takeaways:
- Driveway gate installation in Commack: $2,400-$7,800 depending on size, material, and opener
- Pool gate retro-compliance work: usually $600-$1,800 when the frame is still sound
- Written price before any work starts, every time
- Live person answers 24/7 at (877) 610-2993
Why Gatewood Fence & Gate Is Commack’s Preferred Gate Installation Company
Hal Gatewood has been putting gates in the ground since 2001, and his name is on the shop and on every invoice. That matters in a town like Commack, where neighbors still ask neighbors who did their fence. We show up in the window we promise, and the person who shows up is the same person you’ll see at the hardware store. No third-party subs, no crew rotation from another county.
Commack homeowners call us for the same reason they get a second opinion from a mechanic they trust: they’ve had a national outfit quote one number on the phone and another at the door. Ours is written, upfront, and agreed before we touch a post. The 90-Day Done Right Promise is stamped on every job. If it’s not done right, one call brings Hal back. Not a manager, not a ticket number. Hal.
We serve the whole 11725 ZIP, from the streets off Harned Road down to the neighborhoods near the Smithtown border. Average response to Commack is same-week for measures and quotes, and if your gate is down and the driveway is unsecured, we treat it as the emergency it is. Dispatch and scheduling run through our New York City office, and crews serve Commack locally.
Our Gate Installation Services in Commack
Driveway Gate Installation
A driveway gate in Commack does two jobs: it keeps the street out of your yard, and it tells anyone casing Jericho Turnpike that your house isn’t the easy one. Standard installs run $2,400-$7,800, depending on whether it’s a single swing, a double, or a slide gate. On Commack’s quarter- to half-acre lots, a single swing gate with a LiftMaster or FAAC operator is the most common setup we install. We set posts below the frost line every time, because a post that heaves in January is a gate that binds in March.
Pedestrian Gate Installation
Pedestrian gates in Commack usually serve one of two purposes: a pool enclosure controlled by state barrier law, or a side yard entrance that trades wear and tear faster than the driveway gate because it gets yanked open forty times a day. We build them with the same post-depth standard as our driveway work, and we outfit pool-adjacent pedestrian gates with self-closing hinges and self-latching hardware that passes a Smithtown inspection. A simple replacement pedestrian gate runs $700-$1,900 installed.
Sliding Gate Installation
Sliding gates make sense on Commack properties where a double swing would eat half the driveway rectangle. Running a track along the inside of the fence line saves swing clearance, and it handles snow better when the ground shifts. We spec slide gates when the existing posts are too far gone to reuse as swing anchors. A new slide gate with track and cantilever hardware starts around $3,200 and goes up with opener and safety edges.
Swing Gate Installation
Swing gates are the signature of Commack’s 1960s and 1970s ranch and split-level homes. The original ornamental iron was built to look good, not to hold up to 50 years of road salt and frost. We install swing gates with heavier post schedules than what was common in 1970, and we pair them with operators that have UL 325 photo-eye protection. A single swing gate install with operator runs $2,400-$5,400 on most Commack lots.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Commack
We’re certified to service nine major gate brands, and we keep common parts for FAAC, BFT, Linear, and Viking in stock for Commack jobs. That means when your opener’s control board dies or a hinge weld fails near the bottom rail, we’re not waiting a week for a part out of a warehouse. Our Gate Installation team works on older operators honestly: if a Linear arm from 1998 is still mechanically sound, we’ll say so. If retrofitting it to modern safety standards costs more than replacing it, we’ll tell you that too, with numbers.
Common Gate Installation Problems We See in Commack Homes
Commack has a specific set of gate problems, driven by its location and its housing stock. Here’s what we see most:
- Frost-heaved posts in shallow footings: Commack’s inland position means the ground freezes reliably in winter, unlike coastal hamlets. Posts set 2 feet deep in 1968 heave several inches, twisting the frame out of plumb. The gate binds, and the latch stops lining up.
- Road salt corrosion on street-fronting gates: Houses off Jericho Turnpike and other high-traffic corridors get salt spray on bottom rails and hinge welds. A panel that looks solid from the driveway often has a bottom rail you can poke a screwdriver through at the post.
- Legacy pool gates without modern safety gear: Original 1960s pool enclosures predate New York’s self-closing and self-latching mandate. A simple spring swap often turns into a full retro-compliance job that requires new hinges, latch, and photo-eye protection.
- Obsolete operator control boards: Commack homes built 1955-1985 frequently have gate operators that were installed in the 1990s or early 2000s. Boards fail, and replacement parts are discontinued. We carry or source boards for FAAC, BFT, Linear, and Viking so you’re not stuck buying a whole new operator because one relay died.
Pricing for Gate Installation in Commack, NY
Here’s the honest math for Commack, straight from the jobs we’ve done in 11725:
- Pedestrian gate, basic steel frame: $700-$1,900
- Single swing driveway gate with operator: $2,400-$5,400
- Slide gate with track and hardware: $3,200-$6,800
- Full retro-compliance on an existing pool gate (hinges, latch, photo-eyes): $600-$1,800
- Post reset with deeper footing below frost line: $450-$1,100 per post
These are the ranges for Commack specifically. The final number depends on gate width, material, whether the existing posts can be reused, and whether a Smithtown permit triggers a barrier inspection. What it doesn’t depend on is how busy we are or what day you call. We quote written, agree before we start, and the price doesn’t change at the door. Free estimates, free second opinion on any written estimate, no trip charge inside the county. Seniors and veterans get 10% off permanently, and any repair over $200 gets $40 off.
We Also Serve Cities Near Commack
Our Gate Installation in Commack coverage extends to the surrounding towns where Commack families send their kids to school and do their shopping. We regularly work in East Northport, Elwood, Kings Park, and Smithtown. Same crew, same written pricing, same 90-Day Done Right Promise. If you’re a mile over the town line, you’re still our neighbor.
The Smart Way to Think About Older Gates in Commack
Homes in Commack were mostly built between 1955 and 1985, and the gates that came with them are now 40 to 60 years old. Retrofitting an older gate is often the right answer, but sometimes a “simple” repair reveals that the frame has been rusting from the inside out for a decade. Fixing a hinge on a post that heaved three inches is not a hinge repair, it’s a post reset. Replacing a latch on a pool gate that doesn’t self-close is a code compliance job, not a ten-minute swap. We make this call honestly, with numbers, before any work starts. The name on the shop is the same name that shows up in your driveway, and that’s the oldest accountability there is in this trade.
Serving Commack, NY - Our Local Coverage Area
We’re based in the Commack area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Commack
No permit is required for a like-for-like hardware swap, but if the work changes the gate’s height, structural configuration, or triggers a barrier compliance inspection, Smithtown wants a permit. The practical answer: if your pool gate is failing self-closing or self-latching requirements, the inspector may flag the entire barrier regardless of scope. We tell you before we quote whether your job needs a permit. Call (877) 610-2993 and we’ll look at what you have.
Almost always, a hinge post heaved in the shallow footing and threw the gate out of plumb. Commack’s inland freeze-thaw cycle is more punishing than coastal areas because the ground freezes solid and stays frozen through repeated cycles. The gate binds, the latch misses, and the operator’s safety sensor trips constantly. We re-set the post below the frost line and replace the hinges, then tune the operator. This is the standard Commack winter repair, and we do it every spring like clockwork.
Usually yes, if the frame is still structurally sound. We can weld in new hinge plates, install spring-loaded self-closing hinges, and add a magnetic latch that meets Smithtown’s barrier standard. If the bottom rail has rusted through from road salt or the post has heaved beyond repair, replacement is the cheaper answer. We’ll cut and weld in your driveway and show you which way the numbers go before you spend a dollar.
No. UL 325 entrapment protection has been the standard for decades, and any automatic gate without photo-eyes or equivalent reversing protection is out of compliance. Older operators from the 90s and early 2000s often lack them, and some homeowners don’t realize the risk. This is a safety issue, not a paperwork checkbox. We retrofit photo-eyes and safety edges on every automatic gate we install or service. Call (877) 610-2993 for a free estimate on bringing yours current.
Usually it’s a combination of road salt corrosion on the track and rollers, plus frost movement in the track base. The salt spray from Jericho Turnpike gets into the bearings and eats them over a few winters. The track sits on a concrete base that heaves slightly, and suddenly the gate jerks instead of glides. We clean, replace worn rollers, check the track base, and sometimes re-pour a short section of footing below frost depth. If you’re near the Turnpike corridor, this is a wear item, not a one-time fix.
Get Your Commack Gate Priced in Writing
Call (877) 610-2993 and Hal will pick up. You’ll get a free measure, a written price before anything starts, and the 90-Day Done Right Promise in writing. Commack homeowners over 50 have seen enough gate companies come and go. Hal Gatewood’s name is on the shop, the shop’s address is published, and he’s been at this since 2001. That’s the guy you want standing in your driveway when the gate heaves in January.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Commack since 2001.