Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Clarkston
Gate installation in Clarkston usually runs between $2,400 and $9,800 depending on whether you need a sliding gate, a double swing gate, or a security gate at an older apartment complex. Most of the work we do in Clarkston’s 30021 zip code happens at the 1970s and 1980s complexes along North Indian Creek Drive, Montreal Road, and Church Street, where shared entrances and tight setbacks mean the gate has to fit the space that exists, not the space a catalog assumes. We plan every job around the fact that Clarkston properties rarely have room to spare, and we quote the full price in writing before any metal gets cut. Call (877) 610-2993 and you’ll talk to a person who knows this town’s gate stock.
Why Gatewood Fence & Gate Is Clarkston’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and the way we do business in Clarkston hasn’t changed since: we show up, we look at the actual posts and footings, and we tell you what will hold up in DeKalb County red clay instead of what’s easiest to sell. Property managers along Rockbridge Road and the complexes behind the Clarkston Community Center know that when a shared entrance gate fails, it isn’t one family waiting in the car. It’s forty families. We run this part of the job the way it has to be run, which means a live person answers the phone around the clock and we keep vehicle and pedestrian access moving even while the new gate is going in.
Every installation we do in Clarkston carries the 90-Day Done Right Promise in writing. If something isn’t right, Hal comes back and makes it right. No runaround, no third-party call center. The person who shows up to your Clarkston property is the person whose name is on the invoice. That’s the kind of accountability that matters when you’re responsible for a gate that serves an entire complex.
Our Gate Installation Services in Clarkston
Sliding Gate Installation
Most of Clarkston’s apartment stock was built with a single shared sliding gate, and that’s still the right choice for most replacement jobs. A sliding gate runs on a track or cantilever system and doesn’t need the wide arc of clear space a swing gate requires, which matters when the entrance sits between two building walls with maybe eight feet of setback. We install new sliding gates with proper reinforced post footings, because Clarkston’s expansive red clay will lean an undersized post within the first wet-dry season cycle.
Double Gate Installation
A double gate gives you a wider opening without the heavy single-panel look, and in Clarkston we see them most often at the rear service entrances of older complexes along East Ponce de Leon Avenue and the side streets off Brockett Road. The failure we fix most often on retrofit double gates is old galvanized hinge posts that looked fine from the outside but had wall thickness worn thin by thirty years of Georgia humidity. We check the post condition before we hang anything on it, because a sagging double gate always starts in the hinge post, never in the middle of the panel.
Pedestrian Gate Installation
At Clarkston properties where the vehicle gate handles dozens of cars an hour, a separate pedestrian gate is the difference between people squeezing through the vehicle opening and people walking through a proper entrance. We install pedestrian gates with the same entrapment protection and operator standards as the vehicle gate, and we match the post steel and powder coat to the existing fence line so it doesn’t look bolted on.
Security Gate Installation
For Clarkston’s multi-family properties, a security gate is doing real work every six minutes, which means it has to be specified for continuous duty, not residential duty. We install security gates with operators from DoorKing and LiftMaster sized for high traffic, keypad and Clarkston Gate Access Control integration, and safety photocells positioned for the actual path of travel. A gate that gets cycled three hundred times a day needs a different class of hardware than a gate on a suburban driveway in Decatur, and we spec it that way from the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clarkston
We’re certified to service nine major gate brands, and for Clarkston work we most often size and install operators from LiftMaster, DoorKing, Linear, and Viking. Those four brands have the commercial-duty controllers and UL 325-compliant entrapment protection that Clarkston’s high-cycle apartment gates actually need. We keep common boards, photocells, and rack stock on the truck when we head into 30021, so a retrofit at a complex off Indian Creek Drive doesn’t stall for a week waiting on a part from a distributor. If we install it, we service it, and we stock Gate Parts & Welding - Clarkston to back that up.
Common Gate Installation Problems We See in Clarkston Homes
- Undersized post footings in expansive red clay. DeKalb County soil swells when wet and shrinks when dry, and a footing poured too small will let a new slide gate post lean and bind within the first year. We drill and pour footings sized for the soil, not the brochure.
- Reusing rusted galvanized hinge posts on heavy double gates. A post that’s been in Georgia ground since 1982 can look solid on the outside and be paper-thin at grade. If we can’t verify wall thickness, we set new posts.
- First-generation operators swapped onto new gates without entrapment protection. A retrofit that skips the photocell and reversing edge is a UL 325 violation and a genuine hazard for Clarkston’s pedestrian-heavy entrances. We don’t install around it, and we won’t sign off on it.
- Single shared entrances that leave no room for staging. Clarkston’s complexes were built with one gate serving the whole property, so a replacement has to happen in place while traffic keeps moving. We sequence the work so the gate stays operable or we set temporary control in place during the swap.
Pricing for Gate Installation in Clarkston, GA
A simple single swing gate for a residential driveway in Clarkston typically runs $2,400 to $4,600 installed. A double swing gate on steel posts runs $4,200 to $7,800 depending on width and panel construction. A sliding gate with a commercial operator starts around $5,800 and goes to $9,800 for a high-cycle security gate with access control. The variables are real: post removal and new footings, entrapment protection retrofits, and the gate’s duty cycle all move the number. We quote a fixed price before work starts, and that price doesn’t change at the door. Gate Installation estimates are free, and Clarkston seniors and veterans get a permanent 10% discount. Call (877) 610-2993 to get an exact number for your property.
We Also Serve Cities Near Clarkston
Our crew runs Gate Installation in Clarkston daily, and we cover the surrounding area too. If you’re in Scottdale, Tucker, Mountain Park, or Decatur, the same live-answer phone line and 90-Day Done Right Promise apply. Scheduling across DeKalb County is coordinated from our Atlanta office, and we group routes so a service call in Tucker shares a truck day with a Clarkston installation when possible.
Serving Clarkston, GA - Our Local Coverage Area
We’re based in the Clarkston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Clarkston
Yes, and this is the configuration we install most often in Clarkston. A sliding gate is the right fit for a single shared entrance because it doesn’t require the large swing arc that a double gate needs, which matters when the entrance is set back tight between buildings. We remove the old gate and operator, set new reinforced post footings sized for DeKalb red clay, install the track or cantilever system, and add entrapment protection and access control. We sequence the work so residents aren’t locked out during the swap. Call (877) 610-2993 for a site visit and written quote.
A sliding gate is almost always the right answer. Swing gates need enough flat ground to arc open without hitting a car, a wall, or the pedestrian path, and most of Clarkston’s older complexes don’t have that clearance at the shared entrance. Slide gates also handle high traffic better, especially when paired with a continuous-duty operator like a LiftMaster or DoorKing. If you’re in Clarkston, we’ll measure the entrance and tell you what fits before you spend a dollar.
Sometimes, but not as often as people hope. The original galvanized posts on Clarkston’s 1970s and 1980s complexes have been standing in Georgia humidity for forty-plus years, and many have lost significant wall thickness at grade level, which is exactly where a gate loads them. We check wall thickness with an ultrasonic gauge before reusing any post. If the post is still sound, we can reinforce and reuse it; if not, we set new posts with proper footings. A post is either good enough or it isn’t, and we’ll show you the reading either way.
Yes. Every automatic gate installed in Clarkston must meet UL 325 entrapment protection standards, which means a monitored reversing mechanism, photocells positioned for the full travel path, and an audio or visual alarm where required. This is a safety standard, not an upsell, and it’s non-negotiable on our installs. At pedestrian-heavy complexes where kids and foot traffic mix with vehicle gates, the photocell placement and reversing edge make the difference between a gate that’s safe and one that’s a liability. Call (877) 610-2993 and we’ll explain exactly what your property needs.
We stage the work so the old gate continues operating until the new posts and track are ready, then we make the swap during a scheduled window with temporary control set up at the entrance. We’ve done enough replacements at Clarkston complexes along North Indian Creek Drive to know that shutting down a shared entrance isn’t an option. We work with the property manager’s schedule, not against it, and we typically complete a full sliding gate swap in one to two days. Call (877) 610-2993 to plan the window for your property.
Call Gatewood Fence & Gate for Gate Installation in Clarkston
If you manage or own a property in Clarkston with a gate that’s leaning, cycling slow, or just old enough to need Gate Repair - Clarkston, call us at (877) 610-2993. You’ll get Hal or someone from his crew on the line, a straight answer about what’s possible, and a free written quote before any work begins. The name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is in writing on every job we install in 30021.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been designing, installing, and repairing gates since 2001, and he still welds on site.