Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Chandler
Gate installation in Chandler, AZ runs $1,200 to $6,800 for most residential jobs, with pedestrian gates on the lower end and automated driveway gates on the higher end. The real x factor in Chandler isn’t the steel or the operator. It’s the HOA architectural review that nearly every master-planned community in this city requires before a single post goes in the ground. We know that process cold because we’ve been working inside Chandler’s HOA subdivisions since 2001, and we’ve learned exactly what gets a gate approved the first time and what gets it kicked back.
If you’re in the 85286, 85224, 85225, or 85226 ZIP codes and you’re staring down a sagging side gate or planning a full driveway gate conversion, call (877) 610-2993. Hal Gatewood will answer or call you back fast and tell you straight what your gate job looks like in Chandler, including the HOA step most contractors forget to mention until it’s too late.
Why Gatewood Fence & Gate Is Chandler’s Preferred Gate Installation Company
We’ve been locally owned and owner-operated since 2001. Hal Gatewood’s name is on the shop and on every invoice, and when you call (877) 610-2993, a live person answers. Not a voicemail tree, not a call center three states away. Sometimes it’s Hal himself. Sometimes it’s someone on his crew who knows Chandler’s HOA subdivisions the way you know your own street.
Chandler homeowners keep calling us back because we do something most gate companies won’t: we repair what others want to replace, and we weld on site so the gate stays in your driveway. That matters in a city where a bad job means an angry HOA board letter and a redo you didn’t budget for. And every job, install or repair, carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back, no runaround.
We also offer a free second opinion on any written estimate from another company. If a national outfit quoted you one price on the phone and a different one at the door, bring us that paper. We’ll go over it line by line with you and tell you what the job actually needs. No trip charge inside the county.
Our Gate Installation Services in Chandler
Here’s what we install in Chandler every week, from Fulton Ranch to the 1970s ranch pockets in central Chandler. If you need something not listed here, call us anyway. If it’s a gate, we’ve probably hung one like it in a Chandler HOA this month. Our full Gate Installation team handles everything from a single pedestrian gate to a full automated driveway system with keypad entry.
Driveway Gate Installation in Chandler
A driveway gate in Chandler typically runs $3,200 to $6,800 installed, depending on width, automation, and whether you’re working with an existing CMU block opening or building new posts. Driveway gates in Chandler HOA communities almost always require architectural review before work starts, and the approved spec nearly always calls for flat black powder coat. We pull the HOA’s standards ourselves and order materials to match. That’s the difference between passing inspection the first time and paying for a strip-and-recoat.
Pedestrian Gate Installation in Chandler
Standard Chandler pedestrian gates run $1,200 to $2,400. Most homes in 85286 and the newer south Chandler subdivisions have 4 to 6 foot tubular steel pedestrian gates hung on CMU block pilasters. It sounds simple, but Chandler’s alkaline caliche soil eats untreated post footings fast. We set hinge posts in concrete footings rated for that soil so the gate holds true through monsoon seasons and 115°F summers. If your existing gate sags in the hinge post, we can often rebuild and re-hang it on site for less than a full replacement.
Sliding Gate Installation in Chandler
Sliding gates in Chandler run $3,500 to $6,500 for a standard single-track system, more if you’re adding automation. Sliding gates show up more often in Chandler’s larger properties and some of the lakeside communities where driveway setbacks are tighter. The monsoon dust is the real enemy here: fine caliche and silica powder pack into track rollers and gear assemblies. We install with that in mind, using sealed bearing rollers and setting the track bed to shed dust rather than collect it.
Swing Gate Installation in Chandler
Swing gates are the workhorse of Chandler’s HOA-heavy housing stock. A basic single swing gate starts around $1,400, and a double gate runs $2,800 to $4,200 before automation. We just finished a 5-foot swing gate in the 85248 ZIP inside Fulton Ranch, and the first call we made wasn’t to the homeowner. It was to the management company. We pulled the community’s architectural standards, ordered flat black powder coat to match the perimeter walls, and hung the gate on hinge posts set in fresh concrete. Then we walked the resident through the keypad programming before the board inspection ever happened.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Chandler
We’re certified to service and install nine major gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Chandler specifically, we keep a deeper stock of DoorKing, Viking, and Elite parts locally because those are the operators Chandler HOAs and custom builders specified most often during the 1990s and 2000s boom. When an operator fails in an Ocotillo community in July, waiting a week for a part isn’t an option, so we carry what Chandler actually needs instead of making you wait on a shipping truck.
Common Gate Installation Problems We See in Chandler Homes
- HOA rejection on powder-coat color. A new gate ordered in semi-gloss black gets bounced because the community spec calls for flat black. A strip-and-recoat costs hundreds. We verify the color code against the HOA’s written standards before we order anything.
- Caliche soil shifts the hinge post. Chandler’s alkaline caliche expands and contracts with moisture, and posts set without deep, properly mixed concrete footings lean within two monsoon seasons. Then the gate sags out of alignment and scrapes the ground. We overdig and set footings below the caliche layer where the soil is stable.
- Operator thermal failure in south Chandler heat. Driveway gate operators in Ocotillo and Fulton Ranch may be within spec but not rated for sustained 115°F ambient heat. They trip thermal protection and leave residents locked out. We recommend motors and capacitors rated for high desert use and book proactive inspections every May before peak heat.
- Monsoon dust kills sensors and gears. Haboob dust from July through September packs fine caliche and silica into optical sensors and gear assemblies, spiking emergency calls within 48 hours of every major dust storm. We install sealed sensors and dust-shielded gear housings on new work, and we clean and recalibrate on service calls.
Pricing for Gate Installation in Chandler, AZ
Here’s what you should expect to pay in Chandler for the most common residential gate jobs:
- Pedestrian swing gate: $1,200 - $2,400
- Single driveway swing gate: $2,800 - $4,500
- Double driveway swing gate: $3,500 - $6,800
- Sliding driveway gate: $3,500 - $6,500
- Automation added to an existing gate: $1,100 - $2,800, depending on operator and entry system
- Solar panel and battery backup added: $450 - $950
What moves the number: gate width and weight, whether you need new posts or can reuse existing CMU block pilasters, whether the HOA requires specific materials or finishes, and the operator you choose. We quote the job in writing before any work starts, and that price is the price. No add-ons at the door. Chandler residents also get $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate, no trip charge inside the county.
We Also Serve Cities Near Chandler
Our crews serve Chandler and the surrounding communities, including Sun Lakes, Gilbert, Guadalupe, and Tempe. If you’re on the edge of Chandler, close to the Guadalupe line or in the southern Sun Lakes area, we cover you from the same local operation. See our Gate Installation in Chandler page for the full local picture, or call (877) 610-2993 and ask whether we cover your street. We almost certainly do.
Serving Chandler, AZ - Our Local Coverage Area
We’re based in the Chandler area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Chandler
Yes, in nearly every Chandler master-planned community, including nearly all of the 85286, 85224, 85225, and 85226 ZIP codes, you need HOA architectural review before replacing or installing a gate. The review typically covers picket spacing, latch style, height, and powder-coat color, which is almost universally flat black in Chandler’s 1990s and 2000s subdivisions. If you skip it, you can face a stop-work order and a forced redo at your expense. We pull the HOA standards ourselves before we order materials. Call (877) 610-2993 and we’ll check your community’s requirements before you spend a dollar.
You typically still need HOA architectural approval even for a solar opener, because the operator housing and solar panel are visible from the street and most Chandler HOA guidelines regulate visible equipment. Chandler’s climate actually makes solar operators a smart choice: we get more than 300 sunny days a year, and solar removes the risk of transformer failure during summer peak demand. But the HOA sign-off still applies. We handle that paperwork as part of the job.
Your gate is sagging because the hinge post has moved in Chandler’s caliche soil, or the hinge bushings have degraded from heat that pushes bare metal surfaces past 150°F every summer. Nylon hinge bushings that would last 12 to 15 years in a temperate climate fail in 5 to 7 years here. We fix the post and the hinge together, so you’re not fixing the same gate twice. Call (877) 610-2993 and we’ll tell you what’s actually failing before we quote anything.
We’ve had the fewest thermal failures in south Chandler with Viking, DoorKing, and Elite operators, because their motors and capacitors are rated for sustained high-ambient operation. The lakeside communities of Ocotillo and Fulton Ranch in 85248 push operators harder than anywhere else in Chandler, and we’ve learned to book proactive motor and capacitor inspections every May before peak heat hits. An operator failure inside a gated Ocotillo community in July means locked-out residents and an emergency HOA call, and that’s a bill nobody wants.
Most pedestrian swing gate installations in Chandler take one to two days of on-site work, plus whatever time your HOA’s architectural review board takes to sign off, which is usually one to four weeks depending on the community’s meeting schedule. In Fulton Ranch and similar communities with active management companies, we’ve seen approval come through in under a week when the paperwork matches the spec exactly. We’ll submit the documents in the format your board expects, and we’ll tell you the realistic timeline up front.
Get Your Chandler Gate Installation Started
If you’re in Chandler and you need a gate hung, automated, repaired, or replaced, call (877) 610-2993. Hal Gatewood or one of his crew will answer, ask you where in Chandler you live, and tell you straight what the job needs. We’ll come out, measure it, walk you through the HOA piece if it applies, and put a written price in your hand before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Chandler and the East Valley since 2001.