Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate installation in Century City is a different trade than nearly anywhere else in Los Angeles. Most of the work here happens under high-rise towers, inside parking-structure cutouts built forty or fifty years ago, where the gate is not decorative but load-bearing: barrier arms, slide gates on steel tracks, swing gates on post footings that have seen forty years of coastal moisture. A typical retrofit in this ZIP runs $4,800 to $19,000 depending on operator class, panel fabrication, and access-control integration. Hal Gatewood has been doing this work since 2001, and the person who answers the phone at (877) 610-2993 is the same person who will stand in your parking structure and tell you honestly whether the post needs re-coring or the operator just needs a new capacitor.
Fast, Reliable Gate Installation Across Century City
Century City sits on the old 20th Century Fox back lot, and almost everything here was built dense and vertical. That changes how gates get installed. You are not setting a driveway gate on a five-acre lot in Bel Air. You are retrofitting a modern operator into a 1970s cutout at an Avenue of the Stars tower, working around HOA appearance rules, structural concrete that has shifted, and residents who need to get in and out without waiting. We know the difference because we work this ZIP regularly. When you call (877) 610-2993, a live person picks up. Hal Gatewood does not run a dispatch queue, and the estimate you get is the price you will see on the invoice, agreed in writing before any work starts.
Why Gatewood Fence & Gate Is Century City’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop and on every invoice. That is the oldest form of accountability there is, and it matters in Century City because building managers and HOA boards here will check. They want a license number they can verify and a phone number that does not lead to a call center three states away. We are locally owned and owner-operated, and we have been at it since 2001. The Century City work we do gets referenced when a board member at one tower tells a friend at another tower about the crew that showed up on time, welded on site, and did not leave a mess in the garage. That is how we built our reputation here, and it holds up.
We are not the cheapest bid in Century City, and we do not try to be. The boards and property managers who call us have usually already paid a residential gate company to guess at a commercial operator, then paid again to have it corrected. A gate that fails in a Century City parking structure does not just inconvenience one homeowner. It strands residents, idles cars, and backs traffic onto Olympic or Constellation. We answer calls around the clock, we stock commercial-grade parts for this ZIP, and we stand behind every install with the 90-Day Done Right Promise in writing. If it is not right, one call brings Hal back. No runaround.
Our Gate Installation Services in Century City
Sliding Gate Installation in Century City
Most Century City parking structures use slide gates, and most of those slide gates were installed when the towers went up in the 1970s and 1980s. A modern slide gate operator gets retrofitted into the original steel cutout, which sounds simple until the rack and pinion alignment is off by a quarter inch and the gate eats its own gear teeth over six months. We measure the cutout, align the rack to the operator, and when the concrete sub-base has spalled or cracked, we correct the mounting pads before we ever bolt anything down. A typical slide gate operator retrofit in Century City runs $5,200 to $11,800 with safety edges and loop detectors.
Security Gate Installation in Century City
Security gates in Century City are not optional. They are part of the access-control system that keeps a luxury high-rise secure. A new security gate here often means integrating a commercial operator with an existing keypad, intercom, or key-fob system that was installed decades ago and has been patched by half a dozen vendors since. We tie the gate into the building’s system, not around it, and we add the UL 325 entrapment protection that older installs never had. That photo-eye and edge-sensor work is not a recommendation. It is code. Building inspectors in this ZIP will fail a new operator that lacks it.
Double Gate Installation in Century City
Double gates show up here on the rare surface-level entry at a mid-rise or at the pedestrian and vehicle split at a tower’s service entrance. A double gate is two leafs that have to meet in the middle with no gap, no sag, and no fight from the operator. Century City’s marine layer pushes salt-laden moisture into hinge posts, and a double gate that is not set on properly cored footings will bind within a year. We rebuild the post footings when we set the gate, not after the gate starts leaning. Double gate installs in this ZIP run $7,000 to $19,000 for custom fabricated panels with automation.
Pedestrian Gate Installation in Century City
Pedestrian gates at Century City towers flank the vehicle entries and take more abuse than anything else on the property. Residents push them, delivery drivers swing on them, and the closer gets slammed three hundred times a day. A quality pedestrian gate here needs a commercial-grade closer, a tamper-resistant hinge system, and a lock that ties into the same fob or intercom as the vehicle gate. We also handle solar-powered pedestrian openers where running grid power to a gate location is impossible or HOA-prohibited. A pedestrian gate install in Century City typically runs $2,400 to $6,800 depending on fabrication and access hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Century City
We are certified to service and install nine major gate brands, including Viking, DoorKing, and Elite, all of which turn up regularly in Century City parking structures. When a 1980s Viking operator seizes, we can usually source the replacement parts or retrofit a modern DoorKing or Elite unit into the same footprint without cutting new concrete. That saves the HOA money and keeps the garage open. We keep common commercial parts on hand for this ZIP because we know a tower on Avenue of the Stars cannot wait three days for a board vote while its only vehicle gate is chained open.
Common Gate Installation Problems We See in Century City Homes
- Old operators in original cutouts: Most Century City towers still run the first or second operator ever installed. The original cutout dimensions were designed for a bulky 1970s electromechanical unit, and a modern operator does not always drop in cleanly. We modify the cutout and alignment so the new operator does not fight the rack or the track.
- Post footings that were never re-cored: A new custom gate panel is almost always heavier than the one it replaces. Setting it on the old post footing without re-coring is how hinge posts fail within months. We bore new footings when the panel weight demands it.
- Missing entrapment protection: Older condo towers in Century City often have operators that predate UL 325 photo-eye and edge-sensor requirements. When we integrate a new gate, we bring that up to code. An inspector will catch it if we do not.
- Salt corrosion on tracks and hinges: Century City sits four to five miles from the Pacific, and the marine layer is persistent. Salt-laden moisture accelerates corrosion on exposed steel track hardware faster than inland areas like Culver City or Mid-City. We specify galvanized or stainless hardware where the exposure is worst.
Pricing for Gate Installation in Century City, CA
| Service | Typical Range in Century City |
|---|---|
| Pedestrian gate installation | $2,400 - $6,800 |
| Sliding gate operator retrofit | $5,200 - $11,800 |
| Double gate with automation | $7,000 - $19,000 |
| Security gate with access-control integration | $6,500 - $16,500 |
| Full slide gate fabrication and install | $9,500 - $24,000 |
The operator class, the panel weight, the condition of the existing concrete, and the access-control integration all move the number. What does not move is the price after we quote it. The figure is agreed in writing before any work starts, and estimates are free. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 to get a number specific to your building.
We Also Serve Cities Near Century City
We do most of our commercial-grade work in Century City, but we also serve Beverly Hills, Culver City, West Hollywood, and Santa Monica. Each of those cities has its own gate character: Beverly Hills is mostly residential driveway gates, Culver City is mixed, and West Hollywood and Santa Monica lean mid-rise with their own HOA layers. If you are reading this from one of those areas, call (877) 610-2993 and we will tell you honestly whether we are the right fit for the job. Our Gate Installation page covers the residential side of what we do across the wider LA area.
Serving Century City, CA - Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Century City
Why does my Century City condo tower’s original parking gate need a modern operator retrofit instead of a simple replacement part?
Because the original operator is obsolete and no one makes parts for it anymore. Century City’s 1970s and 1980s towers often still run first-generation electromechanical units that are no longer supported. A retrofit replaces the operator with a modern commercial unit that fits the existing structural cutout, usually with new loop detectors and safety photocells to meet current UL 325 code. Call (877) 610-2993 for a free assessment of what your specific tower needs.
How do you install a heavy custom ornamental gate in Century City’s limited high-rise parking entry space without disrupting traffic?
We do it in stages and we do it on a schedule that respects the building’s traffic flow. The old panel comes out in sections, the post footings get re-cored if the new panel is heavier, and the operator gets set and tested before the new gate goes on. We have done this in Century City parking entries where there is no room to stage anything, and we keep the disruption down to hours, not days. Call us to walk through your building’s specific constraints.
Can you install a solar gate opener for a pedestrian gate at a Century City mid-rise, or is grid power required?
Yes, a solar-powered pedestrian gate opener is possible in Century City. Solar kits work well for lighter pedestrian gates where running conduit to the gate location would mean cutting through HOA-controlled hardscape. The panel needs direct sun, which can be a challenge on ground-level entries that face away from the coast. We will tell you honestly if your gate location gets enough sun to make solar reliable, or if a low-voltage grid run is the better bet.
What type of gate is best for a Century City underground parking structure: a slide gate, swing gate, or barrier arm?
Almost always a slide gate. A slide gate follows the wall of the structure and does not need a swing arc, which matters in the tight clearances of an underground Century City parking entry. A barrier arm is cheaper but does not secure the opening, and a swing gate needs floor space most of these structures do not have. We will recommend the right type after looking at your cutout and your clearance, not before.
How do you correct a sagging gate in a Century City condo parking garage where the concrete deck has shifted over decades?
We start at the hinge post, not at the middle of the gate. A gate sags in the post, not in the panel, and forty years of concrete deck shift means the post has moved or the footing has spalled. We re-core the post footing, shim the post to plumb, and then reset the gate. Fix the panel without the post and you will fix it twice. Call (877) 610-2993 for an exact diagnosis and a written price. Estimates are free.
Call Gatewood Fence & Gate for Gate Installation in Century City
We just wrapped an install at a high-rise on Avenue of the Stars where the original 1980s Viking swing gate operator had seized on its post footing. Our crew removed the obsolete electromechanical unit, bored new hinge post footings to correct the sag, and installed a LiftMaster commercial operator with a new loop detector and safety photocells, then tied it into the building’s existing keypad entry system. The gate now runs silently and clears the HOA’s appearance standard. That is the work we do in Century City, and that is the work we will do for you.
Call (877) 610-2993 for a free estimate on gate installation in Century City. A live person answers, the quote is free, and the price is agreed in writing before anything gets ordered or installed. Hal Gatewood’s name is on the shop and on the invoice, and he has been standing behind it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Century City with commercial-grade gate installation and repair.