Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Castlewood
Gate installation in Castlewood runs $2,400-$7,800 for a standard automated driveway gate, and $850-$2,400 for a pedestrian walk gate, depending on the post condition, panel size, and operator type. We’re Gatewood Fence & Gate, and we’ve been building and repairing gates in the 80112 corridor long enough to know that Castlewood homes demand something better than a box-store panel bolted to yesterday’s posts. Hal Gatewood runs this outfit out of a shop with his name on the door, and when you call (877) 610-2993, a real person picks up, day or night.
Why Gatewood Fence & Gate Is Castlewood’s Preferred Gate Installation Company
Most of the gates we touch in Castlewood were hung in the late 1980s through early 2000s, and the operators were never designed to outlast the subdivision. We see the same story on cul-de-sacs all over 80112: a LiftMaster from 1998 that still works until the night it doesn’t, a hinge post that’s been slowly pulling out of plumb for a decade, and an HOA letter sitting on the counter because the gate sags three inches past square. Hal has been fixing gates since 2001, and he still shows up to look at the post before he quotes the panel.
We answer the phone with a live person around the clock, not a queue. When you call from Castlewood, you’re talking to someone who knows the difference between Castlewood Ranch, the Timbers, and the neighborhoods off East Castlewood Drive. That matters when your HOA has architectural guidelines and your gate is the first thing the board sees before the street also sees it.
Every installation carries the 90-Day Done Right Promise in writing. If it isn’t right, Hal comes back and makes it right. No fine print, no somebody-else’s-problem. His name is on the shop and on every invoice.
Our Gate Installation Services in Castlewood
Swing Gate Installation
Swing gates are the most common style across Castlewood’s 1990s and 2000s executive homes, and the older ones almost always fail at the hinge post, not at the panel. When we install a swing gate in Castlewood, we’re checking the post footing before we hang anything. Chinook winds that push 60 mph put enormous load on the hinge side, and a post that was set shallow in 1997 will not hold a heavier modern panel. We dig, re-pour, and set the post so the gate actually closes square a year from now.
Double Gate Installation
Double driveway gates are common on Castlewood’s wider entrances, and they fail in pairs. When one leaf drifts low, the other follows. We build and hang matching steel frames, align both leaves to HOA finish specs, and set the center stop so the gates close cleanly without slamming. If you have an existing double gate that’s been patched with a turnbuckle and a hope, we’ll tell you honestly whether you should retrofit or start fresh.
Pedestrian Gate Installation
Walk gates around Castlewood’s HOA communities need to match the driveway gate, not just in color but in the actual finish type. A powder-coated satin black is not the same as a wet-sprayed matte black, and architectural review boards can tell. We install pedestrian gates with matching frames, self-closing hinges where required, and a latch that won’t sag out of alignment by spring.
Security Gate Installation
Some Castlewood homeowners want more than curb appeal. We install security gates with welded steel frames, reinforced hinges, and operator systems sized for the gate’s weight and swing arc, not just whatever was on the shelf. When we’re done, the gate stops people who shouldn’t be there, and it opens every time for the people who should. We also add photo-eyes and safety edges to bring older operator setups current with post-1999 UL 325 entrapment standards.
Trusted Brands We Service in Castlewood
We’re certified to service and install operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Castlewood, we mostly see Viking and Elite on the newer homes and LiftMaster on the 1990s builds. If you have a DoorKing or Ghost Controls opener that’s failed, we can usually source the board or capacitor locally and have you running the same day. We keep common Castlewood parts on the truck because running back to the supplier across town wastes your afternoon.
Common Gate Installation Problems We See in Castlewood Homes
- Chinook wind damage to hinge posts. Castlewood sits in the path of severe downslope wind events that routinely exceed 50-60 mph. That sideways force bends gate frames off track and strips hinge mounts. If your gate drags or binds after a windstorm, the post is the usual culprit, not the panel.
- Hard freeze-thaw cycling on exposed hardware. Castlewood winters don’t freeze once and stay frozen. They freeze, thaw, freeze again, and that cycle works hinge pins and operator gearboxes loose. We see more cracked operator housings and corroded pins here than in lower-elevation Front Range towns.
- Hail-damaged gates that fail HOA inspection. Arapahoe County hailstorms dimple aluminum panels and crack solar operator housings. The panel can look welded and still be cosmetically out of spec. Castlewood HOAs often cite homeowners for visible entry gate damage within 30 days of a major storm, so we recommend an inspection right after any significant hail.
- Legacy operators without modern safety sensors. A lot of Castlewood gates were installed before UL 325 entrapment rules changed in 1999. That means no photo-eyes, no edge sensors, and a controller that can’t be legally retrofitted to code. When the board dies, replacement is often cheaper than trying to patch a pre-safety system.
Pricing for Gate Installation in Castlewood, CO
A basic single swing gate with a manual latch in Castlewood starts around $2,400 installed, while a full automated double driveway gate runs $4,800-$7,800 including the operator, new posts, and safety photo-eyes. A pedestrian walk gate typically runs $850-$2,400 depending on whether we’re matching an existing finish. If the HOA requires a custom powder-coat match or documented architectural submission, expect to add $300-$600 for finish matching and paperwork time. Every quote is written and agreed before we start work. You’ll know the number before we touch the gate, and that number won’t change at the door. We also knock $40 off any repair over $200 and offer a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate, with no trip charge inside the county.
We Also Serve Cities Near Castlewood
When we’re not working in Castlewood, our crews are in Centennial, Dove Valley, Lone Tree, and Southglenn. Same local crew, same parts, same 90-Day Done Right Promise. If you’re a few miles south or east of 80112 and need a gate done right, call and we’ll be there.
Serving Castlewood, CO - Our Local Coverage Area
We’re based in the Castlewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Castlewood
Castlewood’s HOA-governed communities require architectural review before gate installation begins, which typically adds 7-30 days to the timeline depending on the board’s meeting schedule and whether a variance is needed. A standard off-the-shelf steel swing gate often fails review because the finish doesn’t match the original design, so we document the existing finish, submit a custom powder-coat match, and get written approval before we order materials. We handle that paperwork for you, and it’s included in the quote.
In many Castlewood homes, yes, if the posts are still plumb and the footing hasn’t shifted. Brick and stone posts from the 1990s were usually built on deeper footings than wood or steel posts, so they often survive chinook wind loading better. We’ll inspect the post, check it with a level, and tell you whether it can carry the new gate’s weight. If the post has moved even a quarter inch out of plumb, reusing it will put the new gate right back on the same path to sagging.
Hail doesn’t just dent the visible face; it cracks operator housings, shifts solar panel mounts, and dimples the underside of aluminum panels in ways you can’t see from the street. A dimpled panel still opens fine, but the HOA inspector will see it, and you’ll get a citation letter within 30 days. After any major hailstorm in the 80112 area, we recommend a gate operator inspection even if the gate is moving. Catching a cracked housing early is a $200 fix instead of a $1,800 replacement.
If your operator was installed before 1999 and lacks photo-eyes or edge sensors, retrofitting to meet current UL 325 entrapment standards usually means replacing the control board, adding sensors, and sometimes rewiring the whole run, and that’s often more expensive than a new operator. The old board won’t talk to modern safety devices. We’ll quote both paths so you can see the numbers side by side. In most Castlewood cases, replacement wins on cost and reliability.
Undersizing the operator for the gate’s actual weight and wind load. Castlewood’s double driveway gates are heavy, and chinook winds add a constant lateral push that a small residential operator simply can’t hold. When an installer hangs a gate rated for 400 pounds on a 600-pound double leaf and calls it done, the operator burns out its capacitor in two seasons. We size every opener to the measured gate weight plus a wind margin, and we test it under load before we leave.
Call Gatewood Fence & Gate for Gate Installation in Castlewood
If your gate is sagging, your operator is dead, or the HOA letter is already on the counter, call (877) 610-2993. We’ll give you a straight answer and a written price before any work starts. Hal Gatewood has been at this since 2001, and the name is on the shop. You want a gate that closes square, passes HOA review, and still works after the next chinook wind. That’s what we build.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, building and repairing gates in the Castlewood area since 2001.