Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Carson
A new driveway or security gate in Carson typically runs $2,400-$9,800 depending on the gate type, material, and whether you’re adding an automatic opener. Most residential installations in Carson take one to three days once materials are on site. We answer the phone around the clock at (877) 610-2993, and Hal Gatewood has been running Gatewood Fence & Gate since 2001, with a published address and license number anyone can look up.
Over the years we’ve built and hung gates from Avalon Boulevard to the edges of West Carson. We know that the right gate for a 1970s tract home off Del Amo Boulevard is often different from what a 1960s double-wide lot near Victoria Street needs. We don’t sell whichever panel is in stock. We measure the driveway, check the ground, and build what’s going to stay square and swing clean in Carson, not just look good for a photo.
Why Gatewood Fence & Gate Is Carson’s Preferred Gate Installation Company
Carson has a lot of industrial gate work, and a lot of residential too. Our shop is equipped for both, with on-site welding so we can repair or extend a structural steel frame in your driveway, not haul it to a shop across the county. Hal’s policy for years is the 90-Day Done Right Promise: if it’s not done right, we come back and make it right, in writing, on every job. No phone tree, no runaround.
A live person picks up our phone at 3 AM, not a voicemail. That matters in Carson, where a section of gate chain-link left open near a warehouse overnight is a real problem, not a cosmetic one. And the pricing we quote is the price you pay; it’s settled before the work begins. We serve Carson out of our Los Angeles metro office, so scheduling is coordinated, but the person who shows up to measure your driveway knows this area and its ground.
We also respect the fact that hundreds of Carson properties share driveways or have rights-of-way that cross property lines. We coordinate gate swings, post placement, and rail height so a gate doesn’t clip a neighbor’s fence or, on low-set lots, rake across a curb. That kind of care is why we hold a strong local reputation, and why our senior and veteran customers in particular tell their neighbors about us. We offer a permanent 10% discount for seniors and veterans, plus $40 off any repair over $200 and a free second opinion on any written estimate.
Key points, for quick reference:
- Locally owned and owner-operated since 2001; Hal Gatewood’s name is on every invoice
- 90-Day Done Right Promise in writing, not implied
- Live phone answer 24/7; no voicemail, no call center
- On-site welding and repair-first philosophy; we don’t quote replacements just to pad a bill
- Free estimates, upfront pricing, no trip charge inside the county
Our Gate Installation Services in Carson
Before we quote any Gate Installation job, we walk the site. In Carson that often means checking grade, checking which way the gate should open, and checking what’s underneath the surface. Here are the four installations we do most often here.
Driveway Gate
Most Carson driveway gates are original to the house: tubular steel, wrought iron, or chain-link, now 40 to 60 years old. We install new driveway gates from fabricated steel to ornamental iron to automated sliding setups. In Carson’s 90749 and 90746 ZIPs especially, the old swing gates were often too narrow for modern vans and trucks, so we frequently re-hang or extend while preserving the panels where it’s safe.

Pedestrian Gate
A separate pedestrian gate keeps the driveway gate from cycling every time someone walks in with groceries or a mail cart. It also reduces the run time on the motor. In Carson, where many front yards sit right at the sidewalk off Main Street or University Drive, a well-hung pedestrian gate also keeps children and small animals from wandering out between vehicle swings.

Sliding Gate
This is the core of Carson work. Industrial and commercial sites along Alameda Street and Avalon Boulevard rely on sliding gates that cycle dozens of times a day. Residential customers along narrow 1960s-era driveways also benefit: a slide gate runs parallel to the fence line and doesn’t arc into the sidewalk or driveway. We install wheeled track systems, cantilever slides that clear uneven grade, and automated openers paired with safety edges.

Swing Gate
Swing gates still work well on Carson lots with enough setback and flat soil. We build and hang double swing or single swing gates with proper post footings, heavy hinges, and gate closers suited to the opening width. When the load or traffic demands it, we recommend a slide gate instead, and we’ll explain exactly why at the free measure.

Double Gate
A double swing or double slide gate gives the widest clear opening, which many Carson homeowners want for boat storage, RV access, or a work truck. Double drive gates require both leaves to be built and hung square to each other, and on ground that compacts unevenly near the Dominguez Channel, the center alignment can drift. We overbuild the posts and often use collars or helical piers so the two leaves meet cleanly for years.

Security Gate
Security gates in Carson are not the same as decorative gates. The industrial corridor along Avalon Boulevard runs on access control: chain-link with mesh, anti-climb panels, cantilever sliders, and card or phone-based control. We install perimeter security gates as well as residential security gates with remote access, keypads, and battery backup. If you need a gate that keeps a loading dock closed and also opens without anyone leaving a forklift, that’s a conversation we can have, and then build to.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carson
We carry parts and service for nine major brands including Linear, Viking, DoorKing, and Ghost Controls. That covers most of what’s already installed on Carson properties, from Viking V-5 double swing arms and Linear actuators on commercial slides to DoorKing telephone entry systems on security gates and Ghost Controls kits for residential retrofits. We keep common boards, sensors, and remotes in stock locally, so we’re not waiting a week for a part that should have arrived before the gate stopped working. If a part is discontinued, we fabricate what’s needed in-house. There’s no reason to replace an entire operator because one small gear failed.
Common Gate Installation Problems We See in Carson Homes
- Post footings that sink within 18 months. Builders often poured a standard 24-inch footing, which fails in the compressible fill along the Dominguez Channel corridor. We pull the old post, bore deeper, and pour a 36-inch footing with a rebar cage or helical pier, depending on soil. It’s the only way a heavy gate stays square there.
- Salt-fog rust seizing the hinges. Carson’s marine layer carries salt moisture that accelerates oxidation, particularly on homes within a mile of the Dominguez Channel. We strip old hardware, treat the posts, and install sealed-bearing hinges, plus powder-coat or hot-dip the frame so the gate doesn’t seize after one winter.
- Mis-sized swing gates on narrow driveways. A 1960s Carson driveway often has less than a car-width of clearance from the garage face to the sidewalk. Looking at it from the house, a swing gate seems obvious, but many hit the wall or a parked car. We often build a slide gate instead and save you the refabrication cost.
- Shared driveway conflicts. Hundreds of Carson properties share a driveway or rights-of-way. A new gate that swings the wrong direction, or that blocks the neighbor’s trash bins, creates a dispute before the concrete sets. We run the swing and clearance with both properties present, and often install a separate pedestrian gate so the driveway gate isn’t cycling all day.
Pricing for Gate Installation in Carson, CA
A basic residential pedestrian gate in Carson runs $650-$1,800, installed. A single swing driveway gate, fabricated steel and hung with new posts, typically runs $2,400-$4,800 depending on width and whether it’s automated. Sliding driveway gates run $3,800-$8,200, with cantilever models and heavy-duty security frames at the higher end. A double swing or double slide securing a wide drive runs $5,200-$9,800 before automation. Automatic operators add $1,800-$4,200, including safety edges, remotes, and power run. These are honest ranges, not placeholders; the exact price on your gate is quoted and agreed upon before any work starts, and estimates are free. You’ll know the full number before we cut anything.
Here’s the breakdown we give every Carson customer:
- Pedestrian gate: $650-$1,800
- Single swing driveway gate: $2,400-$4,800
- Automatic sliding gate, residential: $3,800-$8,200
- Double swing or double slide: $5,200-$9,800
- Gate opener and controls: $1,800-$4,200
Call (877) 610-2993 to set up a free measure. We’ll give you the written number before you’re committed to anything.
We Also Serve Cities Near Carson
Along with Gate Installation in Carson, we handle West Carson, Compton, West Rancho Dominguez, and Torrance. If your property sits close to those borders, chances are we’re in the area most weeks and can route a measure or repair without turning it into a special trip. The same 90-Day Done Right Promise applies everywhere we work.
Serving Carson, CA - Our Local Coverage Area
We’re based in the Carson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Carson
The ground in parts of 90745 was filled and compressed years ago, and posts set in that fill with a shallow 24-inch footing settle unevenly under load. We prevent it by drilling a 36-inch footing, adding a rebar cage, and, on the worst blocks, using a helical pier or concrete collar so the post holds its line. The fix is done during installation, not three years later as a callback.
We run a rail parallel to the fence line and hang a cantilever slide so the gate panel travels along the fence, not into the sidewalk. If your driveway is extra tight, we can use a shorter panel with a motor and safety edge that stops on obstruction. It keeps full vehicle width and doesn’t infringe on the right-of-way. Call us at (877) 610-2993 for a free measure.
Any new wrought-iron gate we install in Carson gets a hot-dip galvanized undercoat or a heavy powder-coat over treated steel, plus sealed-bearing hinges and stainless fasteners. The salt-laden marine layer along the Dominguez Channel will eat exposed steel in 18 months without that protection. We build for it from the first weld.
Yes. We schedule a day when vehicles can be staged off-site or parked clear, and we often set the new posts and hang the gate in the same day. If the driveway has to stay passable during the work, we’ll build around a clean lane and barricade the work safely. Both properties keep usable access throughout.
If the gate is on an industrial lot with frequent foot traffic, a separate pedestrian gate is usually the right move. It keeps workers off the vehicle slide track, saves wear on the main motor, and lets a card reader or call box control foot access without opening the truck lane. For warehouses along Alameda Street, that’s not an add-on; it’s the design we recommend from the start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Carson since 2001.





Before
After
Before
After
Before
After