Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brockton
A new driveway or pedestrian gate in Brockton typically runs $2,800-$6,500 installed, depending on whether we’re hanging a single swing gate or automating a double gate with operators and safety edges. Most swing gate installations on a standard Brockton lot take one full day once the footing has cured. Call (877) 610-2993 and a live person picks up, day or night, because Hal won’t have it any other way.
We know the streets here. We’ve worked driveways off North Main, side yards in the Campello neighborhood, rear entries behind triple-deckers near the high school, and the older stock down by the old shoe factories. Our Gate Installation crew lives with the same freeze-thaw cycles, the same salt-laden winter runoff, and the same shallow pipe posts that your neighbors deal with. That local knowledge changes what we look for before we ever set a hinge.
Why Gatewood Fence & Gate Is Brockton’s Preferred Gate Installation Company
Hal Gatewood started this outfit in 2001 and never handed it off. When you call about a gate in Brockton, you talk to Hal or someone on his crew who has been hanging gates long enough to know that a sagging gate almost always starts at the post, not the panel. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Brockton homeowners have dealt with enough national outfits that quote one number on the phone and another at the door. We don’t do that. The price we quote is the price on the invoice, agreed to before any work begins. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no hedge language, no “up to” clauses.
Calls to (877) 610-2993 are answered by a live person, 24/7. Not a voicemail box. Not an automated routing tree. A person. Dispatch and scheduling run from the brand’s Boston office, but the crews serving Brockton live and work in your part of the county. Seniors and veterans get a permanent 10% discount, there’s no trip charge inside the county, and we’ll give you $40 off any repair over $200.
Our Gate Installation Services in Brockton
We install, replace, and automate gates across every Brockton neighborhood, from the triple-deckers of 02301 and 02302 to the capes and colonials sprawling through 02304. Here’s what most calls to us turn out to be.
Driveway Gate
Most Brockton driveway gate installs are single swing gates on the postage-stamp side yards common behind the city’s triple-deckers. We match the gate to the driveway width and slope, then set footings to Massachusetts’ 48-inch frost-depth standard, not the shallow concrete collars the original postwar builders used. Driveway gates on busier streets often pair with a Gate Installation plan that includes a keypad and vehicle loop so you don’t have to get out of the car on a cold January night.
Pedestrian Gate
Rear-yard pedestrian gates in Brockton get heavy daily use, especially on multi-family lots where tenants come and go through shared entries. We hang gates sized for the actual opening, which sounds obvious until you see how many older Brockton homes have mismatched gates someone forced into place. We also check the hinge post condition before we hang anything. A rotted wooden post from a 1950s cape will fail again no matter how straight the gate looks on day one.
Sliding Gate
Sliding gates make sense on Brockton lots where the driveway runs tight to the house and there’s no swing clearance. We install and automate slide gates with proper track bedding and cantilever setups that don’t bind when winter heave shifts the ground. We also retrofit older slide operators, including BFT and FAAC units, with modern safety photocells and current safety edges, which matters on any gate near a sidewalk or school route.
Swing Gate
Swing gates remain the most common style in Brockton because they fit the narrow side yards and alley-adjacent entries. We fabricate and hang steel, aluminum, and ornamental swing gates, but the real work happens below grade. A swing gate in Brockton that drags every spring is telling you the post footing is too shallow. We won’t just bolt new hinges on and call it done. We’ll show you the post lean and tell you honestly what fixing it right actually requires.
Double Gate
Double gates cover wider driveways, often on corner lots in the Campello and Montello areas where the driveway opens onto two streets. We pair double gates with synchronized operators so both leaves move cleanly and close fully every cycle. On rental properties, we also coordinate the wiring and control setup with the landlord who owns the post side of the line, which saves everyone a nasty surprise later.
Security Gate
Security gate installation in Brockton usually means a heavier steel gate with an access control package: keypad, intercom, or a vehicle loop with a receiver. We install and program nine major operator brands so you’re not locked into whatever the last contractor preferred. We’ll quote the gate, the operator, and the access control as one written number before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brockton
We certify and service FAAC, BFT, Linear, and Viking operators among the nine major brands we stock parts for. For Brockton customers, that means a broken control board on a 1990s BFT slide operator doesn’t mean waiting two weeks for an obscure backorder. We keep common boards, receivers, and safety edges on hand and can have most hardware in hand within a day or two. When a legacy operator is truly dead, we’ll tell you straight and give you a written price on a modern replacement with current safety features.
Common Gate Installation Problems We See in Brockton Homes
- Post lean that comes back every spring. Freeze-thaw cycling, which hits Brockton harder than the coastal towns, heaves shallow-set concrete collars year after year. The gate drags, the latch stops lining up, and the hinge post tilts. The only permanent fix is excavating and pouring a footing to 48-inch depth.
- Salt corrosion on lower rails and hinge strikes. Brockton’s streets get heavy winter salt, and driveway-adjacent gates take the brunt in the splash zone. Bottom rails rust through, welds crack, and latch hardware seizes. We cut out the rot, weld new steel, and coat it before rust has a second chance.
- Rotted wooden hinge posts on postwar capes and colonials. The panel may be fine, but the post behind the hinge is punky and failing. Replacing only the hardware on a rotted post guarantees a second failure. Fix the post without the panel and you’ll fix it twice.
- Legacy operators that predate modern safety requirements. Many Brockton homes still run control boards from the 1980s and 1990s that predate current photoelectric sensor standards. We can retrofit many FAAC, BFT, and Viking units with modern safety edges and photocells, but when the board is obsolete and parts are gone, replacement is usually the cheaper answer than chasing a dead platform.
Pricing for Gate Installation in Brockton, MA
A straight replacement of a single pedestrian gate in Brockton typically runs $850-$1,400 installed. A standard single swing driveway gate with operator and one keypad lands between $2,800 and $4,200. Double gates with synchronized operators and safety edges run $4,500-$6,500. Heavy ornamental steel or security gates with full access control can reach $7,500 and up. What moves the number: the gate’s width and weight, whether the existing post footings meet the 48-inch standard, and the access control package you want. We give you a free written estimate before any work starts, and the price we quote is the price you pay. No trip charge inside the county. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Brockton
Beyond Brockton, our gate crews regularly cover West Bridgewater, Abington, Whitman, and Holbrook. If you’re in one of those towns and dealing with a leaning post or a dead operator, give us a call. We can also point you to our full Brockton service page for details specific to your neighborhood.
Serving Brockton, MA - Our Local Coverage Area
We’re based in the Brockton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Brockton
If the post has heaved enough to lean visibly, straightening it alone won’t hold. Brockton’s freeze-thaw cycles push shallow footings out of plumb every winter, and pulling the post straight just resets the clock for next year. In most cases the footing needs to be excavated and repoured to the 48-inch frost-depth standard. That’s the only repair that stops the annual reset. Call (877) 610-2993 and we’ll tell you honestly which situation you’re in after looking at the post.
The owner of the parcel where the post is planted is the one who has to sign off, and when the post straddles the line, both landlords have to agree before any footing work can begin. This comes up constantly on Brockton’s multi-family blocks, where rear gate posts often sit directly on a shared boundary. We’ve had jobs stall at the title line for a month while two owners sorted out who owned the post. We won’t start digging until the ownership question is settled in writing, and we’ll help you figure out who to talk to.
Many BFT slide operators from the 1990s can accept modern retrofitted photocells and safety edges, as long as the control board has an available input. When the board is intact and the motor runs clean, retrofitting is almost always cheaper than a full replacement. When the board is corroded or the platform is truly obsolete, you’ll spend more chasing parts than you would on a new operator installed. We service old BFT units regularly and will show you which side of that line your operator sits on.
Because the hinge post footing is heaving and tilting, not because the hinges are loose. The gate frame itself may be straight, but when the post leans, the latch side drops. Tightening hinges on a heaving post just masks the symptom for a few weeks. The real fix is resetting the post at proper depth. On a heavily used chain-link gate behind a Brockton triple-decker, that’s usually a one-day job once we’ve confirmed the property line.
You don’t strictly need both, but on a busy street we recommend at minimum a keypad and a safety loop. The keypad lets you open the gate without leaving the car. The loop detects a vehicle sitting in the gate’s swing path and prevents the gate from closing on it, which matters on Brockton streets where delivery trucks and passenger cars pull up close. A loop also prevents the gate from closing on a car that idles in the path. We’ll quote both, with the safety edge and photocells included, as one written number.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brockton since 2001.