Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Broadview Heights
Gate installation in Broadview Heights runs $2,800-$12,500 for most residential projects, with custom ornamental driveway gates typically landing between $4,500 and $8,000 including operators. We’re the local crew that shows up, measures properly, and doesn’t leave until the gate swings true and closes soft. If you’re on the fence about whether your existing gate can be saved or needs full replacement, call (877) 610-2993 and I’ll tell you straight either way.
Broadview Heights isn’t a place where a cookie-cutter gate makes sense. The homes up here off Broadview Road, Wallings Road, and around the subdivisions near the Cuyahoga Valley have a certain standard. That’s why we build and install gates that match the house rather than fight it. We have been doing this since 2001, and the name on the shop is Hal Gatewood. You can drive to the shop and look me in the eye if you ever need to.
Why Gatewood Fence & Gate Is Broadview Heights’s Preferred Gate Installation Company
Most of our Broadview Heights work comes from neighbors telling neighbors. Someone on their street had an old double swing gate that sagged or a post that leaned, and we fixed it or replaced it without a song and dance. That’s the reputation that matters in a place like Broadview Heights, where people talk at the rec center and the Home Days festival and actually remember who did good work.
When you call us, a live person answers. Not a voicemail, not a routing system. Hal or someone on his crew picks up, every hour of every day. For Broadview Heights, we’re usually on site within a day or two for installations and same day for emergency repair calls. We’re not coming from three counties away. Scheduling and dispatch run out of our Cleveland office, and the crews who serve Broadview Heights know these streets.
Every gate we install carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back. No fine print, no runaround. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Installation Services in Broadview Heights
Driveway Gate Installation
Custom driveway gates are the heart of what we do in Broadview Heights. Most of the homes here were built in that window from the late 1970s through the early 2000s, and many of them were designed for ornamental iron or aluminum driveway gates as a statement piece. When those original gates finally give out, or when a homeowner wants to add one where none existed, we fabricate and install something that fits the colonial or traditional architecture of the neighborhood. A typical custom fabricated driveway gate in Broadview Heights runs $3,800-$9,500 depending on width, material, and whether we’re adding operators.
Pedestrian Gate Installation
Pedestrian gates get overlooked until somebody looks at the driveway gate and realizes the walkway gate next to it is rusted through or dragging on the ground. We build and install pedestrian gates that match the driveway gate in style and finish, so the whole entry looks intentional. Simple steel pedestrian gates in Broadview Heights generally run $900-$2,200 installed, including hinges, latch hardware, and a proper post set.
Sliding Gate Installation
We install fewer sliding gates in Broadview Heights than swing gates, mainly because most driveways here have the width for a double swing. But there are some properties with tight front setbacks where a slide gate is the only workable solution. We fabricate, weld, and install slide gates with track or cantilever systems, and we pair them with operators from FAAC, BFT, or Linear. A typical residential sliding gate installation in Broadview Heights runs $4,000-$11,000, with cantilever systems on the higher end.
Swing Gate Installation
Swing gates are the signature look across Broadview Heights subdivisions, especially the double ornamental swing gates built into stone or brick columns. When we install a swing gate here, we account for the soil before we ever order materials. Broadview Heights sits on clay-heavy glacial soils that move a lot through freeze-thaw cycles, so we don’t set posts in a few inches of concrete and call it done. We go deep. A single ornamental swing gate installation runs $2,800-$6,500; a matched double swing gate with operators typically runs $6,000-$12,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broadview Heights
We’re certified to install and service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Broadview Heights specifically, we keep a healthy stock of FAAC and BFT parts on hand because those are the operators we see most often in the subdivisions up here. That matters when a board fails or a limit switch acts up and you don’t want to wait a week for a part to ship. We can usually have your gate running again same day or next morning.
Common Gate Installation Problems We See in Broadview Heights Homes
- Heaved post footings from freeze-thaw clay. The clay-heavy glacial soils across Broadview Heights expand and contract hard every winter. Lake-effect snow brings repeated freezes and thaws, sometimes multiple cycles in a single week, and that’s enough to push gate posts out of plumb within one season. When we install new gates here, we dig deeper footings than we would in sandier soil communities.
- Salt corrosion on iron and steel gates. Driveway deicing salt accelerates rust on gate frames and hardware faster than neighborhoods further from the lake. Hinges, latch posts, and the bottom rails of ornamental gates are the usual casualties. We recommend and install corrosion-resistant finishes and hardware on every Broadview Heights gate.
- 1990s-era gates failing at footing and hardware together. A lot of the gates installed during the subdivision boom of the late 1980s and early 1990s are now around 30 years old. Original hinge posts and concrete footings reach end of life at the same time. A hinge call often reveals a cracked, heaved footer underneath, which turns a simple repair into a full post reset.
- Undersized operators struggling with heavy ornamental gates. We see plenty of older automatic gates in Broadview Heights with operators that were undersized for the gate’s weight from day one. The motors burn out early, circuit boards fail, and homeowners get frustrated. We size operators to the actual gate weight, not the brochure.
Pricing for Gate Installation in Broadview Heights, OH
Here’s what you can expect to pay for gate installation in Broadview Heights’s market, based on the work we’ve done across 44147 and the surrounding streets.
- Custom ornamental driveway gate (single swing): $2,800-$6,500 installed
- Custom double swing driveway gate with operators: $6,000-$12,500 installed
- Sliding gate (track or cantilever): $4,000-$11,000 installed
- Pedestrian gate matching driveway gate: $900-$2,200 installed
- Operator installation on existing gate: $850-$2,400 depending on gate weight and brand
- Full post reset with deep footings for heaved post: $600-$1,400 per post
Every quote is written down and agreed to before we start any work. You get a free measure and a written price, and that price doesn’t change when we show up. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free, and I’ll give you a number you can hold me to.
We Also Serve Cities Near Broadview Heights
Our Gate Installation team works throughout the communities around Broadview Heights, including Brecksville, North Royalton, Independence, and Seven Hills. If you’re in one of those areas and need a gate built or repaired, the same local crew that knows Broadview Heights’s soil will come to you. You can also visit our Broadview Heights page for more about how we serve this area specifically.
Serving Broadview Heights, OH - Our Local Coverage Area
We’re based in the Broadview Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Broadview Heights
Broadview Heights sits on clay-heavy glacial soils that expand and contract aggressively during Northeast Ohio’s freeze-thaw cycles. Lake-effect snow off Lake Erie drives repeated hard freezes and thaws through the winter, sometimes several cycles a week. That movement pushes gate posts out of plumb within a single season, something homeowners in sandier soil suburbs rarely deal with. We install deeper, reinforced footings specifically to counter this. Call (877) 610-2993 if your posts have already started leaning, and we’ll assess whether a reset is enough or if full replacement makes more sense.
For a heavy ornamental swing gate in Broadview Heights, we recommend 48 inches of depth minimum with rebar reinforcement, and that’s not a number we pick casually. The freeze-thaw clay movement here means a shallow footing will fail, sometimes within one winter. In sandier neighboring communities, 36 inches might hold fine. Here, 48 is the floor for a gate that will stay true. Get a free measure and written quote at (877) 610-2993 and we’ll dig the footing right the first time.
Yes, but only after we correct the post alignment first. Mounting an operator on a gate that’s already out of plumb will make the operator work harder, burn motors faster, and eventually tear itself up. In Broadview Heights, most existing gates that have shifted are a result of heaved footings, so the correct fix is a post reset and then a properly sized operator. We’ve done this exact job on many late-1990s subdivision gates. Call (877) 610-2993 and we’ll come look at your gate, tell you what’s wrong, and quote the full fix upfront.
For Broadview Heights, we recommend a zinc-rich primer under a powder coat or industrial enamel, with stainless or galvanized hardware at every hinge and latch point. Driveway deicing salt and lake-effect moisture accelerate rust on plain iron and steel faster than you’d expect, especially near the bottom rails and hinge posts. We’ve seen 10-year-old gates up here that look like they’re 30. The material choice matters as much as the fabrication. Call (877) 610-2993 to talk through what finish makes sense for your gate and budget.
Because the original concrete footings from that era in Broadview Heights were often poured too shallow for the clay soil, and after 25 to 30 years of freeze-thaw cycling, the footer itself is cracked or heaved. New hinges on a shifting post will just pull out of alignment again within a season or two. Fix the panel without the post and you’ll fix it twice. We recommend pulling the post, drilling a 48-inch footing with rebar, and resetting the post before hanging new hardware. One job, one fix, done right. Call (877) 610-2993 for a free assessment and a written quote before any work starts.
Most standard gate installations in Broadview Heights are scheduled within 3 to 10 business days after we measure and confirm the design. Custom fabrication adds time depending on the gate’s complexity, usually 2 to 4 weeks from order to installation. Emergency repairs on existing gates are same day in almost all cases. We’ll give you a clear timeline when we quote the job, and we show up in the window we promised. Call (877) 610-2993 to get your installation on the calendar.
Contact Gatewood Fence & Gate in Broadview Heights
If you’re looking at a leaning gate post, a rusted hinge, or a driveway that needs a proper gate built for it, call (877) 610-2993. You’ll get a live person, a straight answer, and a free estimate with no trip charge inside the county. Hal Gatewood has been doing this since 2001, and the name is on the shop. That means something in Broadview Heights.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broadview Heights and surrounding communities since 2001.