Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brighton
A new driveway gate in Brighton typically starts around $2,800 for a basic steel tube swing gate, and most mid-range ornamental iron installations with an operator land between $5,500 and $9,500. We install gates on your timeline, not ours, and you’ll get a written price before any work starts. Hal Gatewood has been at this since 2001, and the shop operates in Brighton every week. Call (877) 610-2993 for a free measure and estimate.
Brighton isn’t a generic suburb. It’s a town where a gate on a 1950s ranch off Bromley Lane sits three miles from a new ornamental iron gate at Brighton Crossing. That mix matters when we size posts, pick hardware, and set footings. We know the difference because we work both sides of I-76 every month.
Why Gatewood Fence & Gate Is Brighton’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop and on every invoice we hand a Brighton customer. That’s not a marketing line. It’s how a gate company behaves when the owner lives in the same metro and answers his own phone. Since 2001, we’ve installed and repaired gates in the 80601, 80602, and 80603 ZIPs, and we answer calls around the clock with a live person. Not a voicemail. Not a call queue.
We carry parts for Linear, Viking, Ghost Controls, and DoorKing operators locally, which means a Brighton opener job doesn’t stall waiting on a warehouse three states away. Our installers are background-checked and wear uniforms. And every job carries the 90-Day Done Right Promise in writing. If the gate sags, the operator misbehaves, or the hinge post shifts, one call brings us back, no runaround.
Here’s what Brighton homeowners tell us matters most: we quote a price before we touch the gate, we show up in the window we said we would, and we don’t replace what can be repaired. That’s the reputation we’ve built in Adams County, and it’s the reason much of our installation work comes from referrals off Bronco Boulevard, Lochbuie, and the neighborhoods around Prairie Center.
Our Gate Installation Services in Brighton
We install gates that fit Brighton properties: tight shared driveways, rural acreage parcels, HOA lots with setback rules, and older homesteads with salvaged posts. Here’s what that looks like in practice. For a broader look at what we do, see our Gate Installation team’s full service breakdown.
Driveway Gate
Brighton driveways run the full spectrum, from narrow 10-foot approaches in mid-century neighborhoods near Benedict Park to wide double-lane entries on acreage east of I-76. We measure the opening, check the slope, and recommend a gate that clears the vehicles you actually drive, not the car a catalog assumes you own.
Pedestrian Gate
A pedestrian gate on an older Brighton property often hangs between two posts that have weathered decades of clay heave. We set new post footings below frost line, hang the gate so it swings square, and use hardware that can handle the South Platte wind loads that shove through this valley. It’s a small gate, but it gets installed with the same care as a driveway gate.
Sliding Gate
When a Brighton driveway is too steep or too close to the property line for a swing gate, a slide gate solves the problem. Many of the installations we do on shared driveways and in HOA communities like Brighton Crossing are slide gates for exactly this reason. We install the track, the operator, and the safety edges correctly, because a slide gate that jumps its track is a liability, not an amenity. See how Brighton fits into the larger picture on our Gate Installation in Brighton page.
Swing Gate
Single and double swing gates remain the most common choice in Brighton, especially on the rural-residential parcels in 80601 and 80603. The key is the hinge post. In this clay soil, a post set 24 inches deep will lean within a couple of years. We set hinge posts deeper, in wider footings, because we’ve seen what the freeze-thaw cycle does to shallow concrete. A gate sags in the hinge post, not in the middle, and that is where we start.
Security Gate
A security gate in Brighton usually means one thing: keeping vehicles contained or out while letting the right people through. We build gates with the hardware and locks that hold up to sustained wind and regular use. For HOA properties, we coordinate with the management company on setback rules and access requirements so the gate works for every vendor, not just the homeowner.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brighton
Gatewood Fence & Gate is certified to service nine major gate brands, and we lean on the ones Brighton households actually run: Linear, Viking, Ghost Controls, and DoorKing. We keep common parts for these systems close by, so a Brighton operator repair or new motor install doesn’t get held up waiting on a shipment. If you already have a brand preference, tell us and we’ll advise you straight on whether it fits your gate and your driveway.
Common Gate Installation Problems We See in Brighton Homes
- Shallow hinge posts that lean in year one. Brighton’s expansive clay heaves with every freeze-thaw cycle, and a post set at 24 inches will shift. We set posts deeper, in wider footings, so the gate stays plumb through winters and springs.
- Slide gates installed with no room to service the operator. On tight Brighton lots where a slide gate runs parallel to the property line, installers sometimes bury the operator where nobody can reach it. We leave service access, full stop.
- New posts set into old telephone-pole remnants. East of I-76 in 80601 and 80603, we see driveway gates hung on salvaged telephone poles that rotted at grade in the clay. Pull the lean, set fresh concrete, and the new gate actually lasts.
- Wind-racked double gates on exposed High Plains driveways. The South Platte valley funnels sustained wind through Brighton, and a double swing gate with undersized frames will rack out of square. We reinforce frames and set hinge posts to take the lateral load.
Pricing for Gate Installation in Brighton, CO
You should know the numbers before you call. A basic single steel tube swing gate in Brighton runs $2,800-$4,500 installed. A double ornamental iron driveway gate with a slide operator and keypad typically lands between $6,500 and $11,000 depending on setback, power access, and whether we’re working around an HOA. A pedestrian gate on concrete footings runs $900-$2,200. Adding a Viking or Ghost Controls operator to an existing gate is usually $1,400-$2,600. The price we quote is the price you pay, before any work starts. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near Brighton
Brighton is our home base for this side of Adams County, and we regularly install gates in Lochbuie, Derby, Northglenn, and Thornton. If you’re just across the county line, call and ask, the free estimate covers you wherever you are on this side of the metro.
Serving Brighton, CO - Our Local Coverage Area
We’re based in the Brighton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Brighton
You need a slide gate if your driveway slopes sharply, runs close to the property line, or if a swing gate would block a shared right-of-way. Otherwise, a swing gate is the more economical choice for most Brighton driveways. We’ll measure the slope, the setback, and the wind exposure and give you a straight recommendation. Call (877) 610-2993 and we’ll come take a look.
For a hinge post on a swing gate, we set footings at least 36 inches deep in Brighton’s expansive clay, with wider holes and extra concrete around the base. Shallow footings heave. The South Platte valley wind loads make it worse. Deeper is not optional here.
Yes, and we do this often in Brighton Crossing and similar communities west of I-76. We check the HOA’s setback and noise rules, then size the operator to the gate’s weight and travel. In one Brighton Crossing install, we used a LiftMaster slide operator with a rack and pinion because the driveway slope and tight setback left no room for a swing. The job stayed within the HOA’s access rules and kept the shared right-of-way moving.
We won’t hang a new gate on a rotting telephone-pole post. In 80601, those posts often rot at grade in Brighton’s clay soil within 10 to 15 years. We remove the old post, set a proper concrete footing with a steel post, and hang the new gate on something that won’t lean. Call (877) 610-2993 for an honest assessment.
We stage the work so one side of a double gate stays usable, or we set the new gate on temporary support while footings cure. On shared driveways, we coordinate with neighbors so nobody’s vehicle gets locked out. The access plan is part of the written price you get before work starts.
One More Thing About Brighton
Brighton sits at a transition point: suburban sprawl to the west, working agricultural plains to the east. The South Platte River valley funnels wind through town, and the clay underfoot heaves with every freeze-thaw cycle. Together, that means a gate here needs a deeper post footing and a sturdier hinge than the same gate in a sheltered Denver neighborhood. We build for Brighton’s reality because we work in it every day. Wind load and soil heave, not just panel weight, determine whether an installation lasts. That’s the knowledge you get when you call a local shop that has been at it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brighton, CO since 2001.