Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Brentwood Estates
A new driveway gate in Brentwood Estates starts with the post footing. The brick and Tennessee limestone pillars common along Crockett Road and Concord Road carry serious weight, and if the footing is undersized, that wide ornamental iron swing gate will lean within the first year. We’re Gatewood Fence & Gate, and we’ve been installing and repairing gates since 2001. Hal Gatewood’s name is on the shop, and the person who shows up to measure your entry will be someone you can look in the eye at the hardware store next week. Call us at (877) 610-2993 for a free estimate on Gate Installation anywhere in the 37024 ZIP.
Why Gatewood Fence & Gate Is Brentwood Estates’s Preferred Gate Installation Company
We work this area constantly, so we know what holds up along the estate drives off of Crockett Road and the long entrances that stretch back toward the Harpeth River. Our Gate Installation in Brentwood Estates work focuses on the details other crews miss: post footings poured deep enough for limestone pillars, operators sized for a 16-foot wrought iron slide gate, and solar power specified for Middle Tennessee’s overcast winter weeks rather than a sunny day in July. Hal has been running this shop since 2001, and the 90-Day Done Right Promise is stamped in writing on every job. If something isn’t right, one phone call brings him back. No runaround.
When you call (877) 610-2993, a live person picks up. Not a voicemail tree, not a call center. That matters when your gate stops opening at 7 a.m. and you need to get out for work. We schedule direct windows, show up when we say we will, and quote the job up front in writing before any work begins.
Our Gate Installation Services in Brentwood Estates
Driveway Gate Installation
Most Brentwood Estates properties feature a motorized driveway gate anchored by brick or limestone pillars, and a new installation here is not a simple hardware swap. We pour post footings sized for the full weight of the gate plus the stress of thousands of open-close cycles, then set the posts true. From there we install the gate, the operator, and the access controls as one integrated system. Long gravel approaches off Crockett Road need a gate that will not close on a delivery truck, so we often pair the operator with a buried loop detector that senses the vehicle’s full length.
Pedestrian Gate Installation
Many Brentwood Estates estates pair the driveway gate with a separate pedestrian gate and intercom column. When we install or replace a walk gate, we fit it to the existing column rather than forcing the homeowner to rebuild the entry. A pedestrian gate needs its own hinge posts and a closer that will not slam in the wind, along with keypad or intercom integration that talks to the rest of the access loop.
Sliding Gate Installation
Slide gates make sense on Brentwood Estates acreage where a swing gate would eat too much of the driveway envelope. The tradeoff is the track, which sits in the path of gravel, ice, and horse trailer traffic. We install steel on concrete so the track stays true, and we size the operator for the full gate weight rather than a bare minimum. If the gate is 300 feet or more from the nearest line voltage, we will design a solar gate opener with a deep-cycle battery bank that cycles reliably through winter.
Swing Gate Installation
A double swing gate on a limestone-pillared entry is one of the most common requests we get in Brentwood Estates. The hinge posts carry the entire load, so we go deeper than code minimums and let the concrete cure fully before hanging the gate. Undersized footings are the number one cause of a new wrought iron gate sagging within the first year. We fix it right the first time because Hal gets genuinely annoyed when he finds sloppy work somebody left behind.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brentwood Estates
We’re certified to service nine major gate brands, and we carry local parts stock for the operators most common in Brentwood Estates, including FAAC, BFT, and Linear. If your estate gate still runs a 1990s operator from the original build, chances are the control board has been discontinued. We’ll tell you straight whether it’s worth repairing or whether a full operator replacement makes more sense, and we’ll quote it before any work starts. No haggling, no surprises at the door.
Common Gate Installation Problems We See in Brentwood Estates Homes
- Leaning hinge posts from undersized footings. A wide wrought iron swing gate hung on brick or limestone pillars puts enormous twisting force on the post. If the footing is not deep enough, the post shifts and the gate sags. We see this most often on gates installed by contractors who do not specialize in this work.
- Solar gate openers that die in February. Middle Tennessee winters bring overcast weeks and periodic ice storms, and a solar system sized for sunny conditions will leave an acreage gate dead exactly when you need it. We size panels and battery banks for the worst month, not the best one.
- Slide gates closing on long trailers. Without a loop detector buried in the gravel approach, a slide gate cannot sense the full length of a truck or horse trailer. The gate starts closing mid-vehicle. On Brentwood Estates acreage this is a guaranteed call-back problem.
- Disconnected access systems. A new gate that does not talk to the existing keypad, video intercom, or pedestrian gate creates a second system the homeowner has to manage. We program everything on one access loop so one code works everywhere it should.
Pricing for Gate Installation in Brentwood Estates, TN
A complete driveway gate installation in Brentwood Estates typically runs $4,500 to $9,800 depending on gate width, material, and whether we are building new post footings or working with existing pillars. A pedestrian gate installation usually falls between $1,800 and $3,400. If you need a solar gate opener with a battery bank for a gate that sits 300-plus feet from the house panel, expect to add $2,500 to $4,500 to the operator cost. The price is quoted and agreed in writing before any work starts, and we honor it. Call (877) 610-2993 for a free on-site estimate.
| Service | Typical Brentwood Estates Range |
|---|---|
| Driveway gate installation (single swing, standard width) | $4,500 - $7,200 |
| Driveway gate installation (double swing or 16 ft. slide) | $7,500 - $9,800 |
| Pedestrian gate installation | $1,800 - $3,400 |
| Solar gate opener with battery bank | $2,500 - $4,500 (add to operator) |
We Also Serve Cities Near Brentwood Estates
We work throughout this corner of Williamson and Davidson counties. If you are in Brentwood, Forest Hills, Nashville, or Franklin, we cover those areas too. Same owner-operated shop, same 90-Day Done Right Promise, same live person answering the phone at (877) 610-2993.
Serving Brentwood Estates, TN - Our Local Coverage Area
We’re based in the Brentwood Estates area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Brentwood Estates
Yes, and we do it regularly. We size the solar panel array and deep-cycle battery bank for Middle Tennessee’s overcast winter weeks, not just summer sun, so the gate keeps cycling when ice coats the tracks. Call (877) 610-2993 and we’ll walk your driveway to confirm the panel placement and battery sizing before quoting anything.
Deeper than the minimum. For a wide double swing gate, we typically go below the frost line and pour a footing sized for the full gate weight plus wind load, then let the concrete cure fully before hanging anything. This is the work that keeps the hinge post from leaning in the first year. We’ll show you the footing plan as part of the written estimate.
In most cases a slide gate is the better choice on acreage, because it does not require the long swinging clearance a horse trailer needs. But the slide gate must have a loop detector buried in the approach so it holds open for the trailer’s full length. We’ll factor that into the estimate and the install.
Yes. We treat the pedestrian gate, the driveway gate, the keypad, and the intercom as one access loop, and we program the new operator to work with the existing controls rather than adding a second system. This is standard on our Brentwood Estates installs, because disturbing one component without re-syncing the loop is how gates end up fighting each other.
Yes. UL 325 entrapment standards apply to every automated gate, and photocells plus the operator’s built-in obstruction sensing are what keep a pet, a child, or a delivery driver from being caught by a moving gate. We install and verify them on every gate we set, no exceptions. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brentwood Estates, Tennessee since 2001.