Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beech Grove
A new driveway gate or pedestrian gate in Beech Grove typically runs $850 to $3,800 installed, depending on size, material, and whether you’re adding an operator. Most standard swing gate installations take one full day, and we quote the job before any work starts so you know exactly what you’re paying. Call (877) 610-2993 and a live person answers, around the clock.
Beech Grove is its own city, with its own building department and its own permits. That matters more than most people realize when the time comes to install a gate properly. We’ve worked these streets long enough to know where the 46107 inspectors want to see deeper footings, where the original 1950s posts are still serviceable, and when you’re better off starting fresh. Hal Gatewood started this shop in 2001, and the name is still on the door.
Why Gatewood Fence & Gate Is Beech Grove’s Preferred Gate Installation Company
We’re not a national brand with a rotating crew. Hal Gatewood owns the shop, and the person who shows up to measure your gate will know Beech Grove’s permitting process without having to call and ask someone else. That matters here specifically, because Beech Grove runs its own building department separate from Indianapolis and Marion County. If a contractor assumes unified county rules, you can end up with a failed inspection on a perfectly good-looking gate. We don’t make that mistake.
Our Beech Grove customers call us for the same reasons again and again. The quote we give is the price you pay. Every job carries our 90-Day Done Right Promise in writing, not as a handshake. If something isn’t right, one call brings us back. No trip charge inside the county, free estimates, and a live person answers the phone 24/7. When you call, you get a person, not a voicemail tree.
We also carry parts for the brands Beech Grove homeowners actually have: Linear, DoorKing, and Viking operators especially. That means when we install your gate and something needs adjusting later, we’re not waiting a week on a part from a warehouse. We stock what this area uses.
Our Gate Installation Services in Beech Grove
Most of what we install in Beech Grove falls into a few categories. Here’s what that looks like on the ground.
Swing Gate Installation
Swing gates are the most common style for Beech Grove driveways, especially on the post-WWII ranches and bungalows that dominate the 46107 zip code. A single swing gate with a basic manual latch starts around $850. Add an automatic operator and the total moves to $2,400 to $3,800 depending on operator type and whether you need a concrete saw cut for power. We always set posts below the 24-inch frost line here, because anything shallower will heave by March.
Driveway Gate Installation
Most Beech Grove driveways are narrow by modern standards, which changes the geometry. We routinely install gates on 10- to 12-foot driveways where a single swing leaf makes more sense than a sliding gate, simply because there’s no room for the track. A full driveway gate with an operator, two keypads, and a safety photocell runs $2,400 to $3,800 installed. We’ll tell you if a manual gate at $1,200 to $1,800 makes more sense for how you actually use the driveway.
Pedestrian Gate Installation
Pedestrian gates in Beech Grove tend to be chain-link or ornamental steel, often matching an existing fence that went in decades ago. A new standard 36-inch pedestrian gate with hardware runs $350 to $650. If you want it to self-close, which most people do when there’s a dog or a kid in the house, expect $450 to $800 installed. We can match the look of your existing fence line rather than bolting on something that looks like an afterthought.
Sliding Gate Installation
Sliding gates are less common in Beech Grove because of lot layout, but they show up on a few wider properties near the Amtrak shops and along older industrial-edged streets. A manual sliding gate for a 12- to 16-foot opening runs $1,800 to $3,800 before operators. Automatic sliding gates run higher because of the motor, track, and required safety redundancy, typically $4,500 to $7,500. We carry parts for Linear, Ghost Controls, and Viking slide operators locally.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beech Grove
We install and maintain operators from Linear, Viking, Ghost Controls, and DoorKing, along with several others. For Beech Grove homes, the most common operator we see is an older LiftMaster or a Linear that’s been on the gate for 15 years and just stopped recognizing the remote. We stock common control boards, remotes, and safety photocells for these brands so we’re not waiting on shipping. If we install it, we stand behind it with the same 90-Day Done Right Promise every other job carries. Call (877) 610-2993 and we’ll sort out what you have and what fits.
Common Gate Installation Problems We See in Beech Grove Homes
These aren’t hypothetical problems. They’re what we actually find when we show up at a Beech Grove house.
- Heaved posts from shallow original footings. The original post-WWII chain-link posts in Beech Grove were often set in 12 to 18 inches of concrete, which Marion County’s freeze-thaw cycle pushes around every winter. By spring, the post is listing and the gate latch no longer catches. A new gate installed on those old posts will do the same thing within a year. The fix is deeper posts, which we do on every new installation.
- Legacy operators without modern entrapment protection. The original operators on 1960s gates predate UL 325 safety requirements. A homeowner asks for a simple motor swap, but Beech Grove inspection will not pass that without photo-eyes or edge sensors. We add them as part of the install so you pass inspection the first time.
- Rusted chain-link hardware on railroad-era lots. Beech Grove grew up around the Amtrak shops, and the residential lots reflect that: a lot of utilitarian chain-link fencing rather than wood or ornamental iron. The failure we see most is a seized tension-bar bolt or a broken hinge fork. It’s a twenty-dollar part, but if it’s left alone, the gate drags and eventually snaps the post.
- Sagging gates solved with the wrong fix. A gate sags in the hinge post, not in the middle. When the post leans, no amount of turnbuckle adjustment will make the latch line up. We fix the post, not the symptom. If the post is gone, we replace it, not the whole gate.
Pricing for Gate Installation in Beech Grove, IN
Here’s what gate installation actually costs in Beech Grove, with real numbers.
| Service | Typical Price Range |
|---|---|
| Manual pedestrian gate (chain-link or steel) | $350 - $650 |
| Self-closing pedestrian gate | $450 - $800 |
| Manual driveway swing gate (single leaf) | $850 - $1,800 |
| Automatic driveway swing gate with operator | $2,400 - $3,800 |
| Sliding gate, manual | $1,800 - $3,800 |
| Sliding gate, automatic | $4,500 - $7,500 |
What changes the price most in Beech Grove is the post work. If we can reuse your existing posts, labor drops. If the old posts are set shallow and need to come out, or if we’re pouring 24-inch footings for a heavy ornamental steel gate, the number moves up. We always tell you the full price before we start, and that price doesn’t change mid-job. Call (877) 610-2993 for a free written estimate. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Beech Grove
Beyond Beech Grove, our Gate Installation team works regularly in Indianapolis, Greenwood, Cumberland, and Broad Ripple. If you’re in one of those areas, same crew, same 90-Day Done Right Promise, same live-answer phone. The shop runs out of the Indianapolis office, and we’re around Beech Grove constantly. For details on service across the area, see our Gate Installation in Beech Grove page for the neighborhood specifics.
Serving Beech Grove, IN - Our Local Coverage Area
We’re based in the Beech Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beech Grove
From Beech Grove. Beech Grove is a fully independent municipality completely encircled by Indianapolis, and it operates its own building department with its own permit process. An automatic gate installation with new post footings or power runs in the 46107 zip code goes through Beech Grove’s building department, not Indianapolis/Marion County. Contractors who work the surrounding Indianapolis neighborhoods and assume unified county rules can trigger code violations or failed inspections here. We handle the Beech Grove permit path on every job. Call (877) 610-2993 to get the process started.
Because the original posts were set in shallow concrete, and Marion County’s frost line runs 18 to 24 inches deep. Every freeze-thaw cycle shifts those footings a fraction of an inch. Over a few winters, the gate post leans out of plumb and the latch no longer catches. The fix is a new post set below the frost line, which we do as standard on any gate installation in Beech Grove. If your gate is sagging every spring, call (877) 610-2993 and we’ll square it properly.
Usually yes, if the posts are sound and the gate itself hasn’t been twisted out of square. We check the hinge forks and tension bands first. If the post has heaved, we replace it before mounting any operator, because the operator will just amplify the misalignment. You’ll also need an electrical run and, by Beech Grove inspection standards, photo-eyes or edge sensors for entrapment protection. Call (877) 610-2993 for a free estimate on adding an operator to your existing gate.
Yes. Any new automatic gate operator installed in Beech Grove must meet current UL 325 entrapment protection standards, which means photocells or contact edge sensors on swing gates. Older operators from the 1960s and 1970s that lack this protection will not pass inspection if you’re permitting a new installation. We include the required safety gear in every quote, so there’s no surprise line item later. Call (877) 610-2993 and we’ll tell you exactly what’s on the list.
The two most common are seized tension-bar bolts and broken hinge forks, both of which are original hardware from the 1940s to 1960s installations that dominate Beech Grove’s housing stock. The tension-bar bolt rusts and locks up, which makes the chain link impossible to adjust without cutting. The hinge fork snaps from years of a sagging gate being yanked instead of lifted. Neither is a big repair, but both need to be fixed before the gate is hanging by one hinge. Call (877) 610-2993 and we’ll come take a look.
Call Gatewood Fence & Gate for Gate Installation in Beech Grove
If you live anywhere in the 46107 zip code and need a new gate, a new operator, or someone who will tell you honestly whether your existing gate can be saved, call (877) 610-2993. Hal Gatewood has been at this since 2001, the shop is locally owned and owner-operated, and every job carries the 90-Day Done Right Promise in writing. Live person on the phone, free estimate, price agreed before we start. No runaround.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beech Grove since 2001.