Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bargersville
A new driveway gate in Bargersville typically runs $2,800 to $9,500 installed, depending on whether you want a single swing gate, a heavy double gate, or a full sliding system with automation. Most residential installs take one to two days on site once materials are approved and on hand. That includes digging post footings below the frost line, setting the gate, and wiring the operator. Call us at (877) 610-2993 and we’ll give you a written number before any work begins.
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the person who answers your call is someone who actually works on gates, not a phone bank. We coordinate scheduling from our Indianapolis office and send a crew straight to Bargersville. We know the subdivisions off Morgantown Road and the US-31 corridor well enough to tell you before we show up whether your HOA is going to have something to say about the gate you picked.
Key Takeaways
- Gate installation in Bargersville typically costs $2,800-$9,500 installed, with the range driven by gate type, size, and automation.
- Most Bargersville gates live in HOA-governed subdivisions, which means colors, styles, and even hardware can be regulated.
- Johnson County clay heaves 2-4 inches every freeze-thaw cycle, so post footings have to go below the frost line or the gate won’t stay plumb.
- Every install carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back.
Why Gatewood Fence & Gate Is Bargersville’s Preferred Gate Installation Company
We’re a locally owned, owner-operated shop. Hal’s name is on the business and on every invoice, and he’ll hand you his cell number before the first post goes in the ground. That’s the kind of accountability you don’t get from a national outfit that quotes one price on the phone and sends a subcontractor with a different number taped to the dashboard. We’ve been at this since 2001, and the same crew that installs your gate is the crew you’ll call if it ever needs anything.
Bargersville has grown fast, and with that growth came a lot of gates installed in a short window. Builders put them in to satisfy HOA requirements, not always with long-term performance in mind. We fix and replace the mistakes those rushed installs left behind. We also install new gates the right way the first time: footings below the frost line, hinges sized to the gate weight, operators matched to usage, and entrapment protection that meets UL 325.
Every job, installation or repair, carries the 90-Day Done Right Promise in writing. Not “up to” 90 days, not “in most cases.” Ninety days. You call, Hal comes back. No runaround. We answer the phone with a live person 24 hours a day, seven days a week, and the estimate you get before the work is the price you pay when it’s done.
Our Gate Installation Services in Bargersville
We install and automate gates across Bargersville, from the newer subdivisions east of I-69 to the properties along the US-31 corridor. Most of what we do here is Gate Installation work on homes built in the last fifteen to twenty years, and we handle everything from a simple single swing gate to a full custom ornamental double gate with underground automation.
Driveway Gate
A driveway gate in Bargersville is usually the first thing someone sees when they pull up, and it’s also the piece of hardware that takes the most abuse. We size the gate to the opening, match the style to the house and any HOA requirements, and set the operator so it runs smoothly through every season. Most driveway gates here are vinyl privacy, aluminum ornamental, or wood privacy styles that match the fence line. We install all three, plus the automation to run them.
Pedestrian Gate
Pedestrian gates get more cycles than any other gate on the property, so hardware matters. We see a lot of pedestrian gates in Bargersville that were hung with light-duty hinges and a basic latch, and within a couple of freeze-thaw seasons they’re dragging or won’t close. We install pedestrian gates with self-closing hinges where code requires it, proper latch geometry, and frames built to hold their shape in Johnson County clay.
Sliding Gate
Sliding gates make sense on a lot of Bargersville lots, especially where the driveway slopes away from the house or where a swing gate would block the approach. A sliding gate doesn’t fight gravity the same way a swing gate does, which means fewer sag issues over time. The catch is that the track and the rollers have to be set level and true. We’ve pulled out plenty of tracks that were laid on a couple inches of sand and now wobble every time the gate moves. We set our track on compacted gravel and concrete, and we size the motor to the gate weight, not to a guess.
Swing Gate
Swing gates are the most common style in Bargersville, and the one most likely to sag if the posts aren’t right. A gate sags in the hinge post, not in the middle. That means the post has to be deep, set in concrete below the frost line, and sized for the gate it carries. Our standard for a double swing gate is a 4-foot post footing, with the post set in concrete and the hinge hardware rated for the full gate weight. We also favor rack and pinion operators over screw-driven arms on heavier gates for smoother operation through the seasons.
Double Gate
Double gates are what we install most often in the higher-end subdivisions around Bargersville, especially where a wide driveway opening needs a pair of ornamental aluminum or steel gates that meet in the middle. A double gate doubles the hinge and post load, and it doubles the number of ways an installer can get it wrong. We set both posts in deep footings, shim the gates so the meeting stiles line up clean, and install drop rods on the inactive leaf so it stays put when one side opens. Then we throw a few hundred cycles at it before we call it done.
Security Gate
Security gates in Bargersville run the gamut from a heavy ornamental gate with keypad entry to a full sliding gate with intercom and camera integration. We handle the fabrication, the automation, and the access control wiring. The gate itself is only as good as the foundation it sits on and the operator that drives it. We size both for the job, and we wire safety photocells and edge sensors into every automated install so the gate stops and reverses if anything is in its path.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bargersville
We’re certified to service nine major gate operator brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters in Bargersville because a lot of the gates installed in the last decade and a half used whatever operator the builder could get fastest, not necessarily the one best suited to the gate. We stock common parts for these brands in our service vehicles, so when you call us about a Linear operator that stopped responding or a Viking board that’s throwing a fault, we usually have what we need to fix it on the first trip. We don’t make you wait while we order a part from three states away.
Common Gate Installation Problems We See in Bargersville Homes
Bargersville’s housing stock is newer than a lot of the surrounding county, but that doesn’t mean the gates are trouble-free. Here’s what we see most often when we roll out to a call:
- Posts set too shallow for Johnson County clay. Freeze-thaw cycles heave the heavy clay soil under Bargersville 2-4 inches a season, and a post set at 24 inches will shift when a post set at 42 inches below the frost line stays put. A gate that drags or won’t latch in spring is almost always a post problem, not a gate problem.
- HOA-standard hardware that’s undersized for the gate. Builders installing to a covenant spec sometimes hang a heavy double swing gate on light-duty hinges and a box-store latch. The hinge post takes all the load and starts to lean within a couple of years. We replace the hardware and often the post, because fixing just one means fixing it twice.
- Missing or bypassed entrapment protection on slide gates. Some builder-grade slide gate installs skip the photocells or edge sensors to save a few hundred dollars. That leaves the homeowner with a UL 325 violation they didn’t create. Our inspection catches it before it becomes a county problem or, worse, an injury.
- Operators wired with undersized or unprotected cable. Underground power runs that were direct-buried without conduit can short out after a few years of moisture exposure in Indiana. We re-run cable in conduit and make sure the operator has a dedicated circuit where it needs one.
Pricing for Gate Installation in Bargersville, IN
Here’s what gate installation actually costs in Bargersville, based on the jobs we’ve done here:
- Single swing gate, manual: $2,800-$4,200
- Double swing gate, manual: $4,500-$7,800
- Single swing gate with automation: $4,200-$6,500
- Double swing gate with automation: $6,500-$11,500
- Sliding gate with automation: $6,000-$12,000 depending on gate weight and track length
- Custom ornamental double gate with underground operator: $10,000-$18,000 and up
The biggest cost drivers are gate size and weight, whether it’s automated, the operator type, and how much site prep the spot requires. A flat, open yard with easy access costs less than a sloped lot where we’re building a concrete track pad and running conduit under a walkway. You’ll get a written quote before any work starts, and the price we quote is the price you pay. Seniors and veterans get a permanent 10% discount. Estimates are free, and there’s no trip charge inside the county.
We Also Serve Cities Near Bargersville
We work throughout Johnson County and the surrounding area, so if you’re outside Bargersville proper, we still cover you. That includes Franklin, New Whiteland, Greenwood, and Mooresville. You can learn more about our local coverage on our Gate Installation in Bargersville page or just call the number at the top of this page and ask for Hal. He’ll tell you straight whether we can help.
Serving Bargersville, IN - Our Local Coverage Area
We’re based in the Bargersville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bargersville
Yes, and we recommend you get that approval in writing before we order materials. Many of the planned subdivisions off Morgantown Road and the US-31 corridor have covenants that mandate exact gate colors, styles, and sometimes even finish types. A custom gate we build has to match the subdivision’s approved palette or you can be fined. If you’re not sure whether your HOA has gate rules, we’ll help you figure out what to ask, and we can fabricate to whatever spec they approve. Call (877) 610-2993 and we’ll walk you through it.
Every automated gate we install in Bargersville includes UL 325-compliant entrapment protection, which means photocells, edge sensors, or both, depending on the gate type and configuration. Slide gates need protection across the full travel path, and swing gates need sensors that prevent entrapment in the hinge and latch zones. We test the full safety system before we leave, and we’ll show you how it works so you can test it yourself. Call us for an exact quote on your setup; estimates are free.
For a heavy double swing gate in Johnson County, we go 42 to 48 inches deep, which puts the footing below the frost line where freeze-thaw movement won’t grab it. The footing itself is at least 12 to 16 inches in diameter and poured around the post, not just a bag of dry mix dumped in the hole. This is the single most important thing we do on a gate install here, because the clay in Bargersville heaves hard every spring, and a shallow post will throw the gate out of plumb within the first year or two. For a free on-site assessment of your specific gate, call us – the estimate costs nothing.
In most cases, yes, as long as there’s enough room for the gate to slide parallel to the fence line. Sliding gates work well on Bargersville lots where the driveway slopes or where a swing gate would block the approach. The tradeoff is that a slide gate needs a track and a concrete pad, which adds site work and cost. We’ll look at your lot, tell you which gate type fits the space, and give you a written price for each option. Call (877) 610-2993 to schedule a free measure.
By setting the posts in concrete footings below the frost line, using hinges sized to the gate weight, and welding the frame so the corners don’t rack. We also install an adjustable truss or cable system on wider gates where the free corner needs support. In Bargersville’s soil, sag is almost always a post or hinge problem, so we build for the clay from day one. If a gate we install ever does sag within the 90 days, the 90-Day Done Right Promise covers it, and we’ll come back and make it right.
HOA-Approved Custom Gate Fabrication in Bargersville’s Newest Subdivisions
Here’s the thing about Bargersville that you won’t hear from a gate company that isn’t working here every week: the subdivisions off Morgantown Road and the US-31 growth corridor don’t play by the same rules as the open county roads a mile away. HOA covenants in these neighborhoods often spell out approved gate colors, materials, and sometimes even the exact style that has to match the development’s overall look. Install a black ornamental gate in a subdivision that mandates a specific bronze finish and you’ll be hearing from the architectural review committee before the concrete has cured. That constraint doesn’t exist on the unincorporated county roads just outside town, where a landowner can put up almost any gate they want. We fabricate to covenant spec: we match the approved finish, we match the gate profile to the subdivision’s design standards, and we get the approval documented before we cut metal.
In a subdivision off Morgantown Road, our crew installed a 600-pound ornamental aluminum double swing gate with a LiftMaster LA500UL operator, keypad entry, and safety photocells. The HOA required a specific matte black finish, so we powder-coated the hinge posts and panels to spec, poured 4-foot post footings below the frost line, and set the rack and pinion drive so the gate swings silently through both seasons without sag correction. That’s what “done right” looks like in Bargersville: a gate that matches the street it sits on and works through the freeze-thaw cycle without complaining.
We’re not the only company that hangs gates in Johnson County, but we’re one of the few that fabricates on site and welds in the driveway rather than hauling your gate off to a shop across the state line. That matters when you’re matching an HOA finish or dealing with a custom opening that a stock gate won’t fit. We measure, we fabricate, we install, and we stand behind it with the 90-Day Done Right Promise in writing.
Get a Free Estimate for Gate Installation in Bargersville
If you’re in Bargersville or anywhere nearby in Johnson County and you’re thinking about a new gate, call Hal at (877) 610-2993. You’ll get a live person on the phone, a straight answer about cost and timeline, and a written quote before any work starts. We serve Bargersville, Franklin, New Whiteland, Greenwood, Mooresville, and the surrounding area. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bargersville since our founding.