Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Baltimore
Gate installation in Baltimore, MD typically costs $1,800 to $7,500 depending on gate type, material, and whether you need an automatic opener, with most rowhouse alley gates running on the lower end and custom driveway gates on the higher end. We’ve been working Baltimore’s alleys, side yards, and driveways since before the CHAP rules got complicated, and we know exactly what holds up here: iron that can take Chesapeake humidity, footings that survive clay-soil freeze cycles, and designs that won’t get you a letter from a preservation inspector. If you’re in Charles Village, Hampden, Roland Park, or anywhere else in the 21233, 21235, 21239, or 21240 zip codes, call (877) 610-2993 and a live person answers, day or night.
Key Takeaways: Gate Installation in Baltimore
- Typical cost in Baltimore: $1,800-$7,500, with alley gates and pedestrian gates usually $1,800-$3,500 and automatic driveway gates $4,000-$7,500.
- CHAP districts change the rules: In Mount Vernon, Fell’s Point, and parts of Charles Village, period-matching fabrication matters as much as the hinge hardware.
- Narrow alleys usually need sliding gates: A swing gate that arcs into a trash enclosure or utility meters won’t work, and we’ll tell you before you spend a dime.
- Baltimore soil moves: Clay-rich East Baltimore ground freezes and heaves, so we set post footings below frost depth, not where the old gate sat.
- Every quote is written and agreed before work starts: $40 off any repair over $200, no trip charge inside the county, and a 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Baltimore’s Preferred Gate Installation Company
Hal Gatewood has been owner-operated since 2001, and his name is on the shop and on every invoice. That matters in a city where people still ask their neighbors who they trust before calling anybody. We answer our own phone in Baltimore, around the clock, and the person who shows up to your rowhouse is the same person who quoted the job. Not a rotating crew, not a subcontractor, not a call center three states away.
Baltimore customers keep us around because we weld on site. When a 1920s wrought iron gate on a Charles Village alley post starts sagging or the latch binds after a freeze, we don’t haul it off and tell you to buy something new. We fix the gate in your driveway or alley, which is what preservation-minded blocks want and what CHAP inspectors prefer to see. The 90-Day Done Right Promise is printed on every job we leave behind. If it’s not right, one call brings Hal back.
We also stock parts for the brands Baltimore homeowners actually have on their gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means faster turnarounds and fewer trips back and forth to a distributor while your alley gate sits open and your trash cans become everyone’s problem.
Our Gate Installation Services in Baltimore
Call us at (877) 610-2993 and we’ll schedule a free measure and a written price. No estimate games, no price that changes at the door. Here is what we handle most often in Baltimore.
Driveway Gate Installation
Baltimore’s driveway gates split into two worlds: the wider lots in Roland Park and Guilford where a swing or sliding gate has room, and the tight, shared driveways of East Baltimore where the gate needs to tuck against a wall and still clear the passing car mirrors. We survey the actual swing arc, the curb cut, and the slope before recommending anything. A driveway gate in Baltimore with a motor and keypad entry typically runs $4,000 to $7,500 installed, depending on the operator and the panel count.
Pedestrian Gate Installation
Pedestrian gates are the workhorses of Baltimore’s rowhouses. They hang on brick piers, cast-iron posts, or wood fences, and they take daily abuse from trash haulers, delivery drivers, and kids. For a standard wrought iron or steel pedestrian gate with new hinges and a latch, Baltimore pricing runs $1,800 to $3,200. If the post itself is failing, we address the post first, because a gate sags in the hinge post, not in the middle, and that is where we start.
Sliding Gate Installation
Sliding gates are the answer to Baltimore’s narrow alleys, where a swing gate either hits the neighbor’s wall or blocks the utility meters. We install cantilever sliding gates for driveway openings and lighter track-style sliders for pedestrian alleys. In Charles Village’s alley gateway, we installed a sliding gate where a swing gate couldn’t clear the utility meters. Our crew set new post footings, mounted a Ghost Controls gate operator, and added a keypad entry so the homeowner could open it from the alley without leaving the car. That is the difference between a gate that works for your house and a gate that works against it.
Swing Gate Installation
Swing gates make sense when the opening is wide enough and the ground doesn’t slope hard toward the hinge. In Baltimore, that is often true on the larger side yards in north Baltimore, but less true inside the rowhouse belt. We set each hinge post in concrete below frost depth because Baltimore’s clay-heavy soil heaves and settles through the winter. Show me the gate closing on its own and I’ll show you where it’s failing.
Double Gate Installation
Double gates, or bi-parting gates, give you the full opening without the long slide path a single sliding gate needs. They’re common for Baltimore corner homes and larger rear yards that need vehicle access for maintenance or parking. Both leaves must meet cleanly at the center, which means both post footings must be set level and stay level through freeze-thaw cycles. Our double gate work is measured, fabricated, and installed by our own crew, with welded steel frames rather than bolt-together kits.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Baltimore
We’re certified to service and install nine major gate brands, and we keep common parts on hand for Baltimore jobs: Linear, Viking, Ghost Controls, and DoorKing among them. That matters when your gate operator fails on a Saturday and you need to get the car out for work Monday. We also handle LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If you’re not sure what brand lives inside your old gate opener, bring us the unit or send a photo, and we’ll tell you straight whether it’s worth repairing or replacing. We fix what we can and replace only what needs replacing.
Common Gate Installation Problems We See in Baltimore Homes
- Welding a modern tubular steel gate onto a 1920s brick post in a CHAP district draws a preservation violation. The fix is a custom wrought iron fabrication that matches the original design. In Mount Vernon and Fell’s Point, that is the difference between a finished project and a stop-work order.
- Digging a gate post footing in clay-heavy East Baltimore soil without accounting for frost depth leads to heave and a misaligned latch by late winter. We set every footing deeper than the frost line, and we use concrete, not gravel and hope.
- Choosing a swing gate for a narrow alley garage where the gate’s arc hits a trash enclosure or neighboring wall. Sliding gates are often the only workable option, and we tell you that at the quote stage, not after the gate won’t open.
- Repainting iron gates without treating the rust pits first. Baltimore’s Chesapeake humidity gets under paint fast, especially in Hampden and Waverly where alley gates sit in tight, shaded corridors that stay damp for days after rain.
Pricing for Gate Installation in Baltimore, MD
Here is what Baltimore homeowners should expect, in real numbers. A pedestrian alley gate with new posts and hardware typically runs $1,800 to $3,200. A sliding gate for a tight rowhouse alley or driveway opening runs $3,500 to $5,500. A double swing driveway gate with a motor and keypad runs $4,500 to $7,500, depending on the operator and whether we need to run power. A custom wrought iron gate built to match a CHAP district design starts around $3,000 for the gate alone, before installation and finishing.
What moves the price? The post conditions, the length of the power run, the operator brand, and whether the old gate can be welded and reused. We give you a written line-item quote before any work starts, and that price is the price. We also offer a free second opinion on any written estimate you’ve received from another company, so if you are sitting on a bid that feels high, call (877) 610-2993 and let Hal look at it.
We Also Serve Cities Near Baltimore
Our Gate Installation crew works across the wider Baltimore area, including Charles Village, Baltimore Highlands, Brooklyn Park, and Pumphrey. When you call, we’ll tell you exactly when we can be there. You can also visit the Gate Installation in Baltimore page for more on our local service area.
Serving Baltimore, MD - Our Local Coverage Area
We’re based in the Baltimore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Baltimore
It depends on the block and the gate. In CHAP districts like Mount Vernon, Fell’s Point, and parts of Charles Village, replacing a front or alley gate with a modern design that doesn’t match the historic character can trigger a preservation review. The safest path is to restore or replicate the original wrought iron, which is exactly the kind of work we do on site. Call (877) 610-2993 and describe your gate, and we’ll tell you what the CHAP rules mean for your specific block.
A sliding gate is usually the answer. We install sliding gates that ride on a track or a cantilever system, so the gate moves parallel to the wall instead of arcing into it. That is how we solved a Charles Village alley where the swing arc would have hit the utility meters. For a free measure and an honest opinion, call us at (877) 610-2993.
We can, but first we fix the post. Mounting an opener on a sinking post means the gate binds, the opener burns out, and you are left with a bigger bill later. Depending on the post’s condition, we either rebuild the footing, sister steel into the existing masonry, or replace the post entirely. We will show you the problem before we quote the work.
Baltimore’s humid subtropical climate, amplified by proximity to the Chesapeake Bay, keeps relative humidity high year-round, and Hampden’s shaded alley corridors stay damp long after rain. Paint alone does not stop rust if the moisture is already in the pits and joints. We sandblast or needle-gun the gate to bare steel, treat the corrosion, prime it with a rust-inhibiting primer, and then repaint. That is the sequence that holds up here.
Almost always, yes. We weld and reinforce the original frame, add steel plates where hot, and mount the operator to support the existing panel. In a CHAP district, reusing the original iron is also the surest way to avoid a preservation issue. If you want someone to look at the actual gate, call (877) 610-2993 and we will come out for a free measure.
Call Gatewood Fence & Gate for Gate Installation in Baltimore
If you live in Baltimore and you need a gate installed, restored, or fixed, call us at (877) 610-2993. A live person answers around the clock, and we will schedule a free measure and give you a written price before any work begins. Hal Gatewood has been owner-operated since 2001, and the name is on the shop and on every invoice. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Baltimore since 2001.