Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bainbridge Island
Gate installation on Bainbridge Island means working with salt air, heavy shade, and ferry schedules, not against them. A new driveway gate here typically runs $4,800 to $14,500 installed, depending on size, material, and automation. We’re Gatewood Fence & Gate, and Hal Gatewood has been building and repairing gates since 2001. If you’re on Bainbridge Island and want a gate that won’t sag, rust, or stall in two years, call (877) 610-2993 and talk to a live person about what you need.
We know the island. We work around the ferry, not behind it. That matters when a motor fails or a hinge post lets go.
Why Gatewood Fence & Gate Is Bainbridge Island’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop. His address is published. Any Bainbridge Island homeowner can look up our license, drive to the shop if they want, and look Hal in the eye before we ever set foot on the property. That’s the oldest accountability there is, and on an island where word travels fast through the hardware store and the ferry line, we take it seriously.
Our crew shows up in uniform, background-checked, and we quote the price before any work starts. Not a range, not an estimate that might change at the door. The number you get is the number you pay. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
We’ve fixed enough sloppy gate work on Bainbridge Island to know what fails first here: untreated steel footings, cheap hinge posts, operators that were never sealed against salt fog. We build differently because we have to. The island doesn’t give second chances to hardware that isn’t meant for marine air.
Our Gate Installation Services in Bainbridge Island
Bainbridge Island’s housing stock leans custom: long private driveways off Highway 305, craftsman homes behind deer fencing, waterfront lots along Eagle Harbor and Manzanita Bay. Most of what we install falls into a few categories, and we handle each one with the island’s conditions in mind.
Driveway Gate Installation
Driveway gates in Bainbridge Island are usually automated, often steel or aluminum, and almost always expected to run quietly for years. We build the gate, set the posts, wire the operator, and calibrate everything to the specific driveway. Long gravel drives, sharp approaches, drainage that runs toward the gate in winter, all of it gets accounted for. A custom driveway gate here typically runs $5,500 to $15,000, and that includes the operator, safety edges, and the work to get it right the first time.
Pedestrian Gate Installation
Pedestrian gates on Bainbridge Island face a particular problem: they’re small enough that people ignore them until the post rots and the latch stops catching. We set pedestrian gates on galvanized posts or powder-coated steel whenever possible, and for waterfront or heavily shaded properties, we use marine-grade hardware. A standard pedestrian gate with new posts and hardware runs $900 to $2,400 on Bainbridge Island.
Sliding Gate Installation
Sliding gates are popular on Bainbridge Island because they don’t need a wide swing arc, which matters when a driveway is steep or lined with mature fir and cedar. But sliding gates here fail more often than anywhere else we work, because moss and lichen pack into the track and block the photo-eye sensors. We install slide gates with raised tracks, sealed bearing rollers, and enough clearance under the gate to keep debris from jamming the run. Expect $4,200 to $11,000 for a single slide gate with automation on Bainbridge Island.
Swing Gate Installation
Swing gates fit the island’s aesthetic: timber and wrought iron, double gates at the bottom of a gravel lane, single gates at a garden entry. The problem on Bainbridge Island is saturated ground. Post footings heave, wood posts rot below grade, and the gate starts dragging or binding at the latch. We pour deeper footings than standard, use galvanized or powder-coated posts where wood isn’t practical, and weld steel frames square before the panels ever go on. A single swing gate with hardware and a basic operator runs $3,800 to $9,500; double swing gates start around $6,500 and go up with custom ironwork.
For any of this, our Gate Installation team will come out, measure, and give you a written number before anything gets ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bainbridge Island
We’re certified to service and install nine major gate brands, and on Bainbridge Island we most often work with FAAC, LiftMaster, and BFT operators. FAAC hydraulics hold up well in marine air if they’re sealed and maintained properly. LiftMaster makes the most common residential operators on the island, and BFT rams are a solid choice for heavy custom iron gates. We stock common parts locally and can source anything unusual fast, which means we’re not waiting on a barge while your gate sits open.
Common Gate Installation Problems We See in Bainbridge Island Homes
- Moss and lichen packed into slide gate tracks. The island’s fir canopy keeps driveways shaded and damp nearly year-round. Moss grows fast, packs into the track, and the gate trips its safety sensor and refuses to move.
- Salt-air corrosion on hinge posts and operator housings. Untreated steel near the water starts showing rust within a year. We’ve replaced hinge posts that were so oxidized the gate had sagged two inches at the latch.
- Wood post footings heaving from saturated ground. Fifty-six inches of rain a year doesn’t drain fast on sloped, clay-heavy lots. Posts set in shallow footings shift, and the swing gate starts dragging or the latch won’t line up.
- Undersized operators on heavy custom gates. A wrought-iron double gate with solid panels can weigh 800 pounds or more. A cheap opener rated for half that fails in a season. We match the operator to the actual gate weight, not the price sheet.
Pricing for Gate Installation in Bainbridge Island, WA
Gate installation on Bainbridge Island runs higher than the mainland because materials have to come over the water and the marine conditions demand better hardware. You’re not paying for the ferry; you’re paying for footings that won’t heave and steel that won’t rust. A pedestrian gate runs $900 to $2,400. A single driveway swing gate with automation starts around $3,800 and goes to $9,500 depending on material. A custom double swing gate, which is the most common request on the island’s higher-end properties, runs $6,500 to $15,000 or more for ornamental iron work. Sliding gates run $4,200 to $11,000.
We quote the full price up front, before any work starts. You agree to the number, we do the work, and the invoice matches. Call (877) 610-2993 for a free measure and estimate. No trip charge inside the county, and we offer a free second opinion on any written estimate from another company.
We Also Serve Cities Near Bainbridge Island
If you’re across Agate Passage or up toward Poulsbo, we cover that too. We regularly handle Gate Installation in Bainbridge Island and reach nearby Manchester, Tracyton, Bremerton, and Poulsbo with the same upfront pricing and 90-Day Done Right Promise. Same crew, same standards, same live person answering the phone.
Serving Bainbridge Island, WA - Our Local Coverage Area
We’re based in the Bainbridge Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bainbridge Island
Salt air accelerates oxidation on any exposed metal: hinge pins, bolts, operator brackets, and especially the fasteners that hold a wood gate together. On Bainbridge Island we use stainless or galvanized hardware on every wood gate we build, and we seal end grain before the gate is hung. Untreated hardware will show rust within a year near the water, and that rust streaks into the wood. Call (877) 610-2993 if you’re planning a wood gate and want it built for the island, not for a mainland yard.
FAAC, BFT, and LiftMaster all work well on Bainbridge Island when they’re installed with sealed housings and regular maintenance. FAAC hydraulic operators are our go-to for heavy custom gates because they handle weight well and tolerate moisture better than most electric screw-drive units. LiftMaster is common and parts are easy to get. BFT rams are ideal for large sliding gates. The real issue isn’t the brand; it’s whether the housing is sealed against fog and whether the safety sensors are kept clear of moss.
Bainbridge Island’s dense fir canopy and 56 inches of annual rain create constant shade and moisture, which fuels aggressive moss and lichen growth. That moss packs into the slide track and blocks the photo-eye sensors, so the gate thinks something is in the way and refuses to operate. Seattle’s drier, sunnier neighborhoods don’t have the same growth rate. We clean tracks, raise them where practical, and set sensors where moisture and debris can’t blind them.
Yes. Waterfront soil on Bainbridge Island stays saturated much of the year, and standard footings heave and shift. We pour deeper footings and, for heavy or automated gates, use galvanized posts set in marine-grade concrete. That’s the difference between a gate that still opens smoothly in 10 years and one that drags at the latch after two winters. We’ll assess your soil and slope before recommending a footing depth.
Only if the panel can get real sun. Most Bainbridge Island driveways run under dense fir and alder canopy, and a solar panel that gets two hours of filtered light won’t keep the battery charged. In those cases we recommend a low-voltage wired operator or a hybrid setup with a larger remote panel mounted where the sun actually reaches. We’ll look at the site before recommending anything. Call (877) 610-2993 and we’ll walk the property with you.
On a private driveway off Eagle Harbor Drive, our crew installed a custom wrought-iron double swing gate with a LiftMaster operator, and within months the salt air had begun oxidizing the hinge posts. We replaced the untreated steel footings with galvanized posts set in marine-grade concrete, then recalibrated the loop detector and safety photocells to handle the shaded, moss-prone entrance. That gate has run without trouble since.
Call Gatewood Fence & Gate for Gate Installation in Bainbridge Island
If you live on Bainbridge Island and you’re tired of gates that sag, rust, or stall, call us. We’ll come out, measure, and give you a written price before any work begins. Hal Gatewood has been at this since 2001, and the name is on the shop. Call (877) 610-2993 for a free estimate, day or night. A live person answers. Not a voicemail, not a call center, not a chatbot.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bainbridge Island since 2001.