Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Aurora, OH
Most gate repairs in Aurora run $185-$460 for hinge and post work, and $650-$1,200 when an old underground operator needs replacement. We answer the phone live 24 hours a day at (877) 610-2993, and we’ll give you the full price before any work starts. Aurora’s freeze-thaw cycles and aging ornamental iron gates make this one of the more specialized repair markets in northeast Ohio.
Why Aurora Homes Are Different
Aurora sits in the northeast Ohio snow belt east of Cleveland, where lake-effect snow regularly piles up 80 to 100 inches a season. That repeated freeze-thaw cycling heaves gate posts set in concrete, cracks weld joints on ornamental iron panels, and floods or seizes underground linear actuators buried in subdivision entrance vaults. By late winter, we’re digging gates out of a season of abuse.
The housing stock amplifies the problem. Aurora is one of the most affluent planned-community suburbs in the Cleveland-Akron corridor, with upscale subdivisions built heavily from the 1980s through the 2000s. Many feature ornamental iron swing gates and automated community entry systems now 20 to 40 years old. That density of aging estate-style and HOA-managed gates, combined with the brutal climate, means Aurora’s gate work is uniquely driven by operator replacements and structural corrosion on high-end iron installations. Road salt from plowed subdivision streets doesn’t help either. It gets thrown back onto gate panels all winter, attacking welds and bottom rails from the outside in.
Gate Repair in Aurora
Gate repair in Aurora most often comes down to two things: a post that heaved out of plumb during the last freeze-thaw cycle, or an underground operator that finally gave up after one too many winters. We work on ornamental iron, tubular steel, wood, and automated systems of every era, including the aging underground operators common in Aurora’s older subdivisions. Most jobs are finished in one trip, and every repair carries our 90-Day Done Right Promise in writing.
Hinge and Post Repair
When a gate sags, the problem starts in the hinge post, not the middle of the panel. Aurora’s clay-heavy soil swells in spring and contracts in summer, working posts loose over time. We reset posts in fresh concrete poured below the frost line, weld or replace worn hinge plates, and re-hang the gate so it closes without dragging. Hinge and post repairs in Aurora typically run $185-$460 depending on whether we’re resetting one post or two and whether new hinge plates need welding in. A post that wobbles is a gate that will crack its own weld joints by next winter. We fix the post first, every time.
Electric Gate Repair
Electric gates in Aurora run through a lot: rain, sleet, snowmelt, and the freeze-thaw cycles that make this part of northeast Ohio rough on underground wiring. We test the full path from control board to motor to safety sensor. Most Aurora electric gate repairs involve replacing corroded limit switches, rewiring junction boxes that have flooded, or swapping out a control board that took a voltage spike during a storm off the lake. Electric gate repairs most often land between $225 and $575 for limit switches, control boards, or rewiring.
Automatic Gate Repair
Automatic gate repair in Aurora frequently comes down to the operator, not the gate itself. We carry parts for LiftMaster, FAAC, BFT, and other common Aurora installations, and we service all nine major brands our shop is certified to work on. If your gate stopped responding to the remote, or it reverses for no reason, we check the photo eyes, the loop detector, the gearbox, and the board in that order. Full automatic gate operator replacement runs $650-$1,200 installed, with the higher end covering underground actuator swaps. Most automatic gate calls are solved in one trip. For more on what we fix, see our Gate Repair page.
How fast can you get to Aurora for a gate repair?
We can usually have someone in Aurora the same day for urgent repairs, depending on when you call. A gate that’s stuck open or won’t close is a safety problem, so we treat those calls accordingly. Call (877) 610-2993 and you’ll get a live person who will tell you straight when we can be there.
Is gate repair in Aurora more expensive than nearby cities?
Our pricing is the same for Aurora as it is for Streetsboro, Twinsburg, Solon, and Macedonia. The bigger driver of cost is what kind of equipment you have. Older underground actuators from the 1990s, common around Aurora’s subdivisions, usually run $650-$1,200 for replacement because the parts are obsolete. A standard hinge repair is more like $185-$460. We’ll give you a written price before anything starts.
Gate Installation in Aurora
Installing a gate in Aurora is rarely just about the gate. It’s about getting the style and height past your HOA’s architectural review board, matching the ironwork already on your street, and installing the operator so it survives a northeast Ohio snow-belt winter. We handle the full process from submittal drawings to final testing, and we quote every project in writing before any post gets set.
Swing Gate Installation
Swing gates are the most common style on Aurora’s residential lots, and for good reason: they match the traditional look of the brick colonials and custom builds that dominate the housing here. A properly installed swing gate needs hinge posts set deep enough in concrete to survive the freeze-thaw cycling that heaves shallow footings out of plumb every spring. We pour below the frost line, which in Portage County means going deeper than many contractors bother to. A single driveway swing gate on a poured concrete pad runs $2,500-$5,000 including the operator, keypad, and safety photocells.
Security Gate Installation
Many Aurora homeowners ask for a security gate that does more than just swing open when the wind hits it. That means a welded frame, tamper-resistant hinges, and an operator with safety photocells that stop the gate if anything or anyone is in the path. We’ll wire in a keypad or telephone entry system so you can let guests in without leaving the house, and we can coordinate with your HOA’s management company if this is a shared community entry gate rather than a private driveway. Double leaf driveway gates run $6,000-$12,000 depending on width, material, and operator complexity.
Pedestrian Gate Installation
A pedestrian gate beside a driveway entry is a practical touch that gets used more than the driveway gate itself. We can match the pedestrian gate’s height, picket spacing, and finish to whatever is already on your property, or to the architectural guidelines your HOA enforces. In Aurora’s gated communities, the pedestrian gate often carries the same access control system as the vehicle gate, so we plan the wire runs and operator placement together rather than treating the little gate as an afterthought. A typical pedestrian gate installation in Aurora runs $900-$1,800. For more on our installation process, visit our Gate Installation page.
Do I need HOA architectural approval before installing a new driveway gate in Aurora?
Yes, almost certainly. Aurora’s residential neighborhoods are heavily governed by HOA design review boards, and gate style, height, finish, and even the operator housing are typically subject to written approval before any work begins. We’ll help you pull together the submittal package: drawings, material call-outs, panel heights, operator specs, and finish samples.
My 1990s subdivision gate operator is dead. Can you repair it or do I need a full replacement?
Honest answer: it depends on what’s in the vault. Aurora’s gated entrances from the 1990s often used FAAC or Linear underground actuators that are now out of production, and if the vault flooded and the board is toast, replacement is usually the only real option. That’s not upsell; it’s parts availability. We’ll show you the dead unit and quote the replacement path if that’s where we’re headed.
Gate Motor & Opener in Aurora
When a gate motor fails in Aurora, it rarely fails quietly. You’ll hear the grinding, see the panel shake, or watch the opener strain against a post that shifted during the last thaw. A dead opener at a driveway gate on Page Road or an HOA entrance off Liberty Road means nobody gets in without getting out of the car and shoving iron. We carry parts for all nine major brands and we quote replacement options honestly.
Motor Repair
Most Aurora motor repairs come down to a handful of causes: stripped nylon gears in a residential swing opener, a capacitor that gave out, a limit switch that drifted, or a loop detector that no longer senses a car sitting on it. Repairs for these issues generally run $240 to $680 in Aurora. If the motor itself is burned out or the gearbox is gone, you’re often better off replacing the operator entirely than paying labor to rebuild a 25-year-old unit with parts that are getting scarce.
Linear Actuator Replacement
Linear motors are common on Aurora’s estate-style ornamental iron swing gates. They push and pull the gate leaf on a threaded shaft inside a sealed housing. In this corner of Ohio, the housing is rarely sealed well enough. Road salt mist from plowed subdivision streets works into the shaft seals, and when the gate gets pushed by wind or snow load, the shaft bends microscopically. After a few seasons, the motor sounds like a coffee grinder. Linear actuator replacement runs $600 to $1,400 in Aurora.
Battery Backup Installation
We recommend battery backup on every HOA gate operator and most residential driveways in Aurora. Power outages here are a winter reality, and a dead gate means either a dead entry system or a gate that has to be propped open by maintenance. Battery backup keeps the operator functioning through short outages and lets the gate complete a safe close cycle when power cuts mid-swing. Adding battery backup to an existing operator usually runs $350 to $900 in Aurora, depending on the operator’s voltage and whether we need to add surge protection. For more on motor and opener service, see our Gate Motor & Opener page.
Why are so many Aurora subdivision gates being replaced rather than repaired in early spring?
Because the underground actuator vaults installed at Aurora’s 1990s-era subdivision entrances heave and flood during northeast Ohio’s freeze-thaw cycling. Once groundwater gets into the vault and the actuator seizes, the parts are often obsolete and the repair cost approaches the price of a new above-ground operator. A full replacement is usually the only honest fix. Call (877) 610-2993 and we’ll assess your specific gate before you spend money either way.
My automatic gate in Aurora keeps reversing on its own when closing-what’s usually wrong?
The obstruction sensor or safety edge is likely picking up a false signal. On Aurora gates, this often happens when salt corrosion builds up on the safety edge contacts or when the loop detector under the driveway gets water in the conduit and shorts intermittently. It can also be a limit switch that’s set too tight for how the gate settled after a thaw. We test each component rather than guessing.
Gate Access Control in Aurora
A gate access system that won’t respond to the keypad or open for the remote is more than an annoyance on a cold February morning in Aurora. It’s the thing that keeps you sitting in your own driveway while the snow piles up. The most common call we take from the 44202 zip code is for a keypad that lights up but won’t actuate the operator, a phone entry box that rings through to a dead line, or a remote that suddenly won’t pair.
Keypad Entry
A keypad on the gate post or the brick pillar at the driveway is the most common request we get in Aurora, and for good reason. It’s simple, and it works for family members, landscapers, and the occasional contractor without handing out remotes to half the county. We install weather-sealed keypads rated for the freeze-thaw abuse that northeast Ohio dishes out, and we wire them to operators from LiftMaster, FAAC, and DoorKing. Keypad entry install or replacement runs $285-$490 in Aurora, depending on whether we’re wiring a fresh post or reusing existing conduit.
Remote Control
Replacing a garage-style clicker with a proper gate remote is a six-minute job when you know the receiver, and a three-day headache when you don’t. We program remotes in the driveway, on the spot, and we test them from inside the car, not standing ten feet from the antenna. Many Aurora homes with ornamental iron driveway gates use a Ghost Controls or Viking receiver mounted inside a weatherproof box on the post. Remote control programming or replacement runs $65-$145 for a single remote, including testing from inside your car.
Phone Entry Systems
Phone entry systems are common on the HOA-managed entrance gates in Aurora’s newer subdivisions, and they fail in predictable ways: the line goes dead, the directory resets, or the relay that should trigger the gate stops triggering. We diagnose the whole chain, from the phone line at the box out at the road to the relay inside the operator cabinet. A surprising number of Aurora phone entry failures are simple wiring issues at the post, corroded connections from a decade of road salt. Phone entry system repair runs $180-$360 for typical relay, wiring, or directory faults. Learn more on our Gate Access Control page.
Can you handle an access control emergency in Aurora at night or on a weekend?
Yes. A live person answers the phone 24 hours a day, every day. Not a voicemail, not a chatbot. If your gate is stuck open and you can’t secure your property, tell us. That’s an emergency. If the gate is closed and you can’t get in, that’s also an emergency. We’ll tell you what we’re looking at before anybody gets in a truck.
How does access control pricing in Aurora compare to nearby cities like Solon or Macedonia?
Our pricing is the same across the whole service area. We don’t charge more because a house is in an affluent subdivision or because a driveway is longer. The labor rate, the parts, and the warranty terms are identical in Aurora, Solon, Macedonia, and everywhere else we go. The only thing that changes the quote is the actual work required.
Gate Parts & Welding in Aurora
Gate parts and welding in Aurora typically run $140-$420 for hinge replacements, $280-$650 for post replacement, and $260-$900 for custom iron welding depending on how much fabrication the job needs. Most repairs are finished the same day we arrive, and we quote the full price before any torch gets lit or any part gets ordered. We weld on site so your gate stays in your driveway.
Hinge Replacement
Worn barrel hinges on a 25-year-old ornamental iron gate are probably the single most common repair we make in Aurora. When a hinge wears oblong, the whole gate drops, drags the latch side, and starts eating the opener gears. We replace hinge assemblies on site with matched welded steel components, not the thin imported hardware that fails after one winter. Most hinge replacement jobs in Aurora run $140-$320 per hinge set.
Post Replacement
A gate sags in the hinge post, not in the middle. When frost heave from Aurora’s snow belt winters has tilted a post or the weld base has rusted through at ground level, the only real fix is to cut out the old post, core the footing, and set a new one in concrete with proper drainage. We do the whole job on site, including cutting and re-welding the gate panel so it hangs square again. Post replacement typically runs $280-$650 depending on the post size and the depth we need to pour below frost line.
Custom Welding
Sometimes the part simply does not exist anymore. Aurora has dozens of gates built in the 1990s with non-standard hinge spacing or scroll patterns that were fabricated by a shop long since closed. Our team fabricates replacement brackets, gussets, catches, and full panels on site. Custom welding work in Aurora usually runs $260-$900 depending on the complexity of what we’re building and how much of the old gate is still worth saving. For more on parts and welding services, visit our Gate Parts & Welding page.
Is emergency gate welding available in Aurora?
Yes. If your driveway gate has come off its hinges, separated from the post, or is hanging at an angle after a storm or a hard freeze, that’s an emergency to us. Our Aurora emergency service includes on-site welding the same day in most cases, so the gate doesn’t sit on the ground overnight. Call (877) 610-2993 any time and Hal will coordinate it directly.
What kind of warranty do I get on gate welding in Aurora?
Every job carries our 90-Day Done Right Promise in writing. If your hinge, weld, rail, or post work isn’t right, one call brings Hal back to make it right at no charge. This isn’t a “limited” warranty with a list of exclusions. It’s a promise from a guy whose name is on the shop and the invoice.
Brands We Service in Aurora
We stock parts and carry factory certification for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common failures in Aurora can be repaired with parts we already have on the truck, which means one trip instead of two. For our full brand coverage, see our brands page.
Pricing for Gate Repair in Aurora, OH
| Service | Typical range in Aurora |
|---|---|
| Hinge and post repair | $185-$460 |
| Gate realignment | $150-$300 |
| Electric gate repair (switches, boards, wiring) | $225-$575 |
| Automatic gate operator replacement | $650-$1,200 |
| Pedestrian gate installation | $900-$1,800 |
| Single swing gate with operator | $2,500-$5,000 |
| Double leaf driveway gate | $6,000-$12,000 |
| Community entry gate replacement | $8,000-$20,000 |
| Underground actuator replacement add-on | $1,500-$3,500 |
| Motor repair (gears, capacitors, limits) | $240-$680 |
| Linear actuator replacement | $600-$1,400 |
| Battery backup installation | $350-$900 |
What pushes price up in Aurora: obsolete underground actuators from the 1990s that need full replacement, deep frost-line post settings required by code, and custom ornamental iron fabrication when original parts no longer exist. Every price is quoted and agreed in writing before any work starts. You’ll never see a bigger number at the door.
Neighborhoods We Serve in Aurora
We run calls all over Aurora’s 44202 zip code. Same-day response is typical for urgent repairs, with evening and weekend appointments available when the situation calls for it.
- Geauga Lake Subdivisions off Page Road
- Estates south of Treat Road
- Developments along Aurora Hudson Road
- HOA communities with shared entry gates
- Wooded lots west of town near Chamberlain Road
Service Area - Cities Near Aurora
We coordinate dispatch from our Cleveland office and serve Aurora locally, with regular routes through Streetsboro, OH, Twinsburg, OH, Solon, OH, Macedonia, OH, and Bedford, OH. If you’re in any of these areas, the same live answer, same pricing, and same 90-Day Done Right Promise apply.
Serving Aurora, OH - Our Local Coverage Area
Gatewood Fence & Gate crews serve Aurora and the communities around it; dispatch is coordinated from our Cleveland office. The map shows the Aurora coverage area; if your address is on it, we can help.
Also serving nearby: Aurora, OH, Streetsboro, OH, Twinsburg, OH, Solon, OH, Macedonia, OH, Bedford, OH.
FAQs About Gate Repair in Aurora
We cover the entire 44202 ZIP and every subdivision inside it, including the gated community entries off Page Road and the estate lots along Club Drive and Bissell Road. HOA-managed community gates are regular work for us. If you’re in Aurora, we work on it.
Most days, yes. A live person answers the phone 24 hours a day, every day. If a gate has come off its hinges or an opener is stalling mid-close over a driveway, call (877) 610-2993 right away and we’ll get a truck out.
Yes. Every automatic gate operator we install in Aurora includes the full power run from your source to the operator cabinet, plus redundant safety photocells or edges tested before we leave. We don’t hand off the electrical to a third party. It’s our wire, our conduit, and our responsibility to make it pass inspection.
Call (877) 610-2993 for a free estimate. A live person will answer, and we’ll give you the exact price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly