Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Aliquippa
Gate installation in Aliquippa usually runs $1,800-$6,400 for a complete automatic driveway gate, and a pedestrian gate typically lands between $700 and $2,200 depending on width, material, and what’s already in the ground. If you’re on one of the numbered Plan hillsides, expect the footing work to matter more than the gate itself. Call (877) 610-2993 and you’ll get Hal or someone from his crew on the line, not a recording. We’ve been hanging gates on these steep lots since before most national gate companies existed, and we know exactly what the Ohio River valley does to a post set in Aliquippa soil.
Why Gatewood Fence & Gate Is Aliquippa’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the door. That matters in Aliquippa, where a handshake used to be the whole contract. We’re owner-operated, our license number is published, and if you want to see who you’re hiring, drive to the shop and look Hal in the eye. A lot of Aliquippa customers already have, and they’re the reason we keep getting called back to the Plan neighborhoods, Sheffield Terrace, and the West Aliquippa hills.
We answer the phone with a live person 24 hours a day. Not a voicemail. Not a chatbot. When a gate post lets go on a Saturday morning, the person who picks up is someone who can actually help. Our crew is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
Response time to Aliquippa is same-day for emergencies in most cases, and we carry the parts that older Aliquippa gates actually need: heavy hinge plates, steel post sleeves, relay boards that fit 1980s and 1990s operators. We’re not a company that shows up, shrugs, and says “replace it.” We fix what’s fixable, and when replacement is genuinely cheaper long-term, we’ll tell you that straight and show you the numbers.
We also bring something most installers from flatter parts of Beaver County don’t: respect for what a graded lot does to a gate. Monaca and Center Township don’t have the same soil creep problem Aliquippa’s hillsides do. We work the Plan hills every week, so we build for it from the first hole.
Our Gate Installation Services in Aliquippa
Driveway Gate Installation
Most driveway gate installations in Aliquippa are swing gates, because so many Plan lots are too short and too steep for a sliding gate to track cleanly. We hang single and double driveway gates, and we size every hinge, post, and opener for the grade it’s actually sitting on. If you’re on a hillside lot in the 15001 ZIP, we’ll dig deeper footings and add steel reinforcement that flat-ground installers would never bother with. Prices for a complete single swing driveway gate with opener in Aliquippa run roughly $2,800-$5,600 installed.
Pedestrian Gate Installation
Pedestrian gates in Aliquippa’s compact Plan neighborhoods often share a post with the driveway gate or a section of original iron fencing. We install standalone pedestrian gates and tie-ins to existing fence lines, including the original mid-century wrought iron that’s still standing on a lot of these older lots. A typical pedestrian gate installation runs $700-$2,200 in Aliquippa, depending on whether we’re setting new posts or salvaging the existing ones.
Sliding Gate Installation
Sliding gates are the right answer for some Aliquippa properties: wider driveways on flatter corridors near Sheffield Road, light-industrial properties, or any lot where a swing gate would block the street or the sidewalk. We install cantilever and track-style sliding gates, and we’re honest about when a steep Plan grade makes sliding hardware the wrong choice. If your lot can’t shed water off a track line, we’ll tell you before you spend a dollar. Sliding gate installations in Aliquippa typically run $3,200-$6,400 complete with motor and safety package.
Swing Gate Installation
Swing gates are the bread and butter of Aliquippa gate work, especially the heavy steel and wrought-iron double gates that have been hanging on these hills since the mill era. We install new swing gates, retrofit old ones, and rebuild hinges and posts so the gate actually closes square. If your existing posts are worth saving, we’ll sleeve them. If they’re rotated or cracked, we’ll show you why and set new ones. Aliquippa swing gate installations with opener run $2,800-$5,800 on average, with double gates on the upper end.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aliquippa
We’re certified to work on nine major gate brands, and around Aliquippa we see a lot of Linear, Viking, Ghost Controls, and DoorKing operators still in service. Some of them date back to the 1990s and are still worth keeping alive with the right board and a good set of limit switches. We keep common Aliquippa repair parts on the truck, so when your control board dies, you’re not waiting two weeks for a part that’s backordered. If a board is truly obsolete and no compatible replacement exists, we’ll say so plainly and give you a quote for a retrofit or a full operator swap, whichever makes sense for your gate’s age and condition.
Common Gate Installation Problems We See in Aliquippa Homes
Aliquippa gates fail in patterns we’ve learned to read. Here’s what we see again and again:
- Rotated hinge posts on hillside lots. On steep Plan streets, soil creep and stormwater runoff slowly twist a post out of plumb. The gate still opens, but it drags, jams, and eats hinges. New hinges won’t fix a post that’s rotated 4 degrees; the post itself has to be reset or replaced.
- Obsolete control boards with no compatible replacement. A 1980s swing gate operator board dies, and the manufacturer stopped making parts a decade ago. We can often retrofit a modern board into the old housing, which saves the cost of replacing the whole operator and re-running conduit.
- Rust-through at weld seams. Ohio River humidity doesn’t just surface-rust these old iron gates. On gates welded in the 1940s and 1950s, moisture works inside the seams until the metal lets go at the hinge or latch point. We weld on site, so the gate stays in your driveway and gets fixed where it broke.
- Gate frames racked out of square by grade movement. When a hillside shifts, the frame twists. The latch misses. The gate binds. We re-square frames, add sag correction plates, and reinforce the corners so the same fix lasts more than one thaw cycle.
Pricing for Gate Installation in Aliquippa, PA
Here’s where the money actually goes on an Aliquippa gate installation. A complete single swing driveway gate with a new opener, two new posts, and safety photocells runs about $2,800-$5,600. A double swing gate with reinforced posts runs $4,200-$6,400. A pedestrian gate alone runs $700-$2,200. Sliding gate installations run $3,200-$6,400 with motor and safety package.
Post work is the biggest variable. On a flat lot, $400 in concrete and a standard post might be plenty. On a Plan hillside, we’re digging deeper, adding steel, and sometimes building a retaining collar so the post doesn’t rotate again. That’s real labor, and it’s the difference between a gate that works for five years and one that’s sagging again in two. Every quote is written, firm, and agreed before we start. No trip charge inside the county. And we offer a free second opinion on any written estimate. If another company quoted you a number, bring it to us.
We also keep the standing offers simple: $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on your gate installation in Aliquippa.
We Also Serve Cities Near Aliquippa
We do full Gate Installation work in Aliquippa and the surrounding Beaver County towns: Aliquippa, Monaca, Ambridge, Economy, and Carnot-Moon. If you’re a few minutes down the road and your gate is down, call (877) 610-2993 and we’ll put you on the schedule.
Serving Aliquippa, PA - Our Local Coverage Area
We’re based in the Aliquippa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Aliquippa
Yes, in most cases we can retrofit a modern control board into an older Aliquippa swing gate operator housing, assuming the motor and gearbox are still sound. We keep retrofit boards and relay kits for old Linear, Viking, and DoorKing units that most companies won’t touch, because the factory part is long out of production. If the motor itself is failing, we’ll tell you that a full operator replacement is the cheaper answer before you spend money on a board. Call (877) 610-2993 and describe what your gate is doing; we’ll give you a straight read over the phone.
No. New hinges on a leaning post just transfer the problem to the hardware. On a Plan hillside, the post itself has usually rotated or shifted with seasonal soil movement, and the only real fix is to pull the post, check the footing, and set a new one, often deeper and with more reinforcement. We see this every thaw season in Aliquippa. If you call us, we’ll come out, check the post with a level, and show you exactly what moved before any work is quoted.
Yes. Any automatic gate installed in Aliquippa needs photo eyes or an approved equivalent safety device, along with proper entrapment protection, because a moving gate that can’t sense a person or a car is genuinely dangerous. We won’t install an automatic gate without safety photocells, and we won’t leave an older operator running without them either. It’s not a code technicality; it’s how you keep a 400-pound gate from hurting someone.
Usually not, and we’ll tell you that before you spend money. Sliding gates need a long, level track or a sturdy cantilever system, and most steep Plan hillside lots in Aliquippa don’t have enough flat run to make one work without constant binding and track damage. For most hillside properties, a properly built swing gate with reinforced posts is the better installation. If your lot is one of the flatter ones near Sheffield Road, a sliding gate may make sense, and we’ll give you an honest take either way.
Often, yes. A 1940s wrought-iron gate in Aliquippa can be out of square, rusted at the welds, and still be worth restoring, because the original iron is usually thicker and better-made than most modern fabricated steel. We weld on site, re-square frames, add sag correction plates, and retrofit modern safety components to the old gate. Replacement is only the right call when the base metal is too far gone or when restoring would cost more than a new gate of comparable quality. Bring us photos or call (877) 610-2993 and we’ll give you an honest read.
If you’re in Aliquippa and your gate is sagging, leaning, jammed, or outright down, call (877) 610-2993. Hal or one of the crew will answer. We’ll talk about what’s wrong, give you a written price before any work starts, and stand behind every job with the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road, so there’s no disappearing if something isn’t right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Aliquippa, PA and surrounding Beaver County communities since 2001.