Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across West Park
Gate access control in West Park means keypads, remotes, phone entry, card readers, and video intercoms that actually work on gates that are 50 to 70 years old. That’s the honest starting point. Most of the gate hardware in this city was installed when the homes were built, and West Park’s flat, low-lying lots hold water longer than neighboring cities, which means posts heave, wiring corrodes, and operator boards fail in ways a brand-new system bolted to a bad post won’t fix. Hal Gatewood has been welding, wiring, and rebuilding gates in South Florida since 2001, and we serve West Park daily from our Miami-area office. Call (877) 610-2993 and a live person answers, any hour.
Before you spend money on a new keypad or opener, read this page. It explains what actually fails first on West Park gates, what repairs hold up, and what a realistic budget looks like for this specific market. We’ll quote a firm price before any work starts, and we write the 90-Day Done Right Promise on every invoice.
Why Gatewood Fence & Gate Is West Park’s Preferred Gate Access Control Company
We’re not a franchise. Hal Gatewood’s name is on the shop, the license number is published, and the person who shows up in West Park is accountable to someone who lives down the road. When a homeowner near Southwest 40th Avenue calls about a keypad that won’t accept the code after rain, we know to check the post before the board. That’s local knowledge you can’t fake from a national call center.
West Park customers call us because we fix things other companies want to replace. A rusted hinge post gets a new footing and on-site welding, not a sales pitch for a $6,000 gate. A corroded operator board gets diagnosed and swapped with a brand we actually stock parts for. The crew runs background-checked, uniformed, and certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Hal has been at this since 2001, and the 90-Day Done Right Promise is stamped in writing, not buried in fine print.
No trip charge inside Broward County. $40 off any repair over $200. A permanent 10% discount for seniors and veterans. Those are standing offers, not haggle points. Call (877) 610-2993 and you’ll talk to a person who can tell you what’s wrong and what it costs.
Our Gate Access Control Services in West Park
We install, repair, and retrofit access control on existing gates throughout the 33023 ZIP and the surrounding neighborhoods. On West Park’s older CBS homes with original 1960s gates, the access control almost always fails at the point where electronics meet a post that’s been shifting for decades. We address the whole system, not just the circuit board.
Keypad Entry
Keypads on West Park gates are often bolted to posts that have pulled out of their footing. The keypad fails mechanically because the post moves and the wiring flexes. A typical keypad replacement in West Park runs $220 to $480, including weather-sealed housing and stainless hardware. If the post needs resetting first, you’re looking at additional footing work, and we always quote that before starting.

Remote Control
Remotes that work sporadically in West Park are usually a receiver board problem, not a battery problem. High humidity inside the operator housing corrodes terminals over time. We test the receiver, the antenna, and the operator logic board together. Most remote receiver repairs and reprogramming run $95 to $260. If you need new remotes, programming runs $35 to $75 per remote depending on the brand.

Phone Entry
Phone entry systems let a visitor call your cell or house line from the gate, and you buzz them in. In West Park, these fail when the telephone interface board corrodes or the wiring to the gate post cracks from post movement. We install and service phone entry units from DoorKing and Linear, both of which we stock locally. A basic phone entry install in West Park runs $850 to $1,700, retrofit work on an existing gate included.

Card Reader
Card readers make sense on West Park rental properties where tenants change and you don’t want to hand out remotes or share one gate code. We install standalone readers and integrate them with operators from Linear and Viking. A complete card reader system with keypad backup runs $1,200 to $2,400 in this market, depending on the gate type and whether we’re running new conduit through a CBS wall.

Video Intercom
Video intercom is the access control upgrade we’re getting more calls about in West Park because residents want to see who’s at the gate before opening it. These systems fail here when the camera unit bakes in the sun and the wiring behind the post breaks from post movement. A quality video intercom install including a monitor or smartphone app integration runs $1,100 to $2,800. We wire the camera, power, and gate release circuit properly so the gate opens from the app the first time, every time.
All of it is covered by the 90-Day Done Right Promise. If something’s not right, Hal comes back. No runaround.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Park
We’re certified on nine major gate brands, and for West Park we keep a running stock of parts for the three that show up most often on these 1960s and 1970s installations: Linear, DoorKing, and Mighty Mule. That means when a DoorKing board on a Southwest 40th Avenue rental dies from humidity, we often have the replacement on the truck, not on backorder. We also service LiftMaster and the rest of the brand list, but the point is speed. West Park is close to our shop, and stocked parts mean same-week turnaround rather than waiting on a distributor.
Common Gate Access Control Problems We See in West Park Homes
- Hinge posts lean and drag the gate after heavy rain. West Park’s flat lots hold water, and saturated soil around a 1960s footing causes the post to heave. The gate then drags or swings shut on its own, and the keypad or operator bolted to that post flexes until the wiring cracks.
- Rust eats through original galvanized hardware. Broward humidity and standing water accelerate rust on chain-link hinges and ornamental iron gates that have been in the ground since before Nixon left office. The keypad may work fine, but it’s bolted to a post that’s structurally gone.
- Control boards corrode and die after the summer rainy season. Operator boards and loop detectors in low enclosures get wet from flooding and condensate. The remote and keypad go dead together, and the fix is a board swap, not a new remote.
- Wire connections fracture where the post meets the concrete. Post movement after rain flexes the low-voltage wire running from the house to the gate operator. The gate opens sometimes, not others, and it looks like a remote problem. It isn’t.
On a rental property near Southwest 40th Avenue, our tech found a chain-link swing gate pulling its hinge post out of a cracked concrete footing that had shifted after years of standing water. We reset the post in a deeper, wider footing with gravel drainage, then re-hung the gate and wired a LiftMaster swing gate operator with new safety photocells. The gate now opens level, and the post hasn’t leaned again after heavy rain.
Pricing for Gate Access Control in West Park, FL
Here are honest numbers for West Park, based on what we actually bid and install in this city. A keypad replacement runs $220 to $480. Receiver and board repair runs $95 to $260. A phone entry install runs $850 to $1,700. Video intercom starts around $1,100 and runs to $2,800 depending on gate type and wiring. If a post footprint has failed, post reset and re-anchoring runs $350 to $900 and is often the difference between a gate that works for two months and one that works for twenty years.
What actually drives cost in West Park is post condition, not the electronics. A $300 keypad bolted to a post that has shifted for 15 years won’t stay functional. We quote the whole job before any work starts, and the price doesn’t change when the tech arrives. Free estimates, no trip charge inside the county, and $40 off any repair over $200. Call (877) 610-2993 for a written quote.
We Also Serve Cities Near West Park
If you’re in Andover, Miramar, Hollywood, or West Hollywood, we’re already running calls through those neighborhoods every week. We also cover the broader West Park area from our Miami-area office. For a full look at what our Gate Access Control team handles, see the service page. Call (877) 610-2993 and we’ll tell you if we can be there today.
Serving West Park, FL - Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in West Park
Because the footing wasn’t fixed. West Park sits on flat, poorly draining ground, and repeatedly saturated soil around a shallow 1960s concrete footing shifts the post every wet season. The fix is a deeper, wider footing with gravel drainage below the concrete. If someone just shoved the post straight and poured a little patch, it will lean again by August. We quote post resets as a standalone job or as part of an access control install. Call (877) 610-2993 for an exact number on your gate.
Yes, often. Broward County applies Florida Building Code wind-load standards to new or replaced gate and fence systems, and many West Park homeowners replacing a rusted 1960s chain-link gate are surprised when the city tells them the post installation needs permitting and inspection. We handle the permit paperwork on every new gate and access control install we do in West Park. It’s part of the quote, not an add-on.
Yes, if the gate itself is sound and the hinge post isn’t leaning. Solar operators work fine in Florida’s sun, but they’re wasted on a gate that drags or a post that shifts after rain. We assess the gate weight, post condition, and latch alignment before recommending a solar opener. It’s usually the right call for a rental where running 120-volt power to the gate would mean trenching through a small CBS lot. We’ve installed solar Mighty Mule and Ghost Controls openers in West Park where the alternative didn’t pencil out.
Yes, and here’s the part most people miss. West Park isn’t beachfront, but it sits close enough to the coast that salt-laden humidity rides inland, and on these low-lying lots the moisture hangs around. The keypad’s circuit board and the operator’s logic board are the first things to go, usually long before the gate itself shows rust. We specify stainless hardware and weather-sealed enclosures on every West Park install, and we’ve seen the difference in how long they last compared to the original 1960s mounting hardware.
Usually a corroded receiver board or a cracked low-voltage wire where the post meets the concrete. The remote itself is fine. When humidity and standing water get into the board, the receiver becomes intermittent, and it feels like a dead battery or a bad remote. We test the whole circuit rather than replacing remotes blindly. Call (877) 610-2993 and describe what happens after rain. Hal will likely know the answer before he pulls into the driveway.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Park and greater South Florida since 2001. Hal’s name is on the shop, his license number is published, and he still takes the calls.





Before
After
Before
After
Before
After