Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Watauga
If your gate keypad stopped working or you want phone-based entry on a shared driveway in Watauga, here’s the short answer: Gatewood Fence & Gate repairs and installs gate access control across the 76148 zip code, usually within one to two days of your call. A keypad replacement or card reader install in Watauga typically runs $280 to $590, and phone entry or video intercom runs $450 to $1,150 depending on the hardware. We’ve been at this since 2001, Hal Gatewood’s name is on the shop, and our number is (877) 610-2993. We know Watauga’s gates, Watauga’s soil, and the way those two fight each other.
Why Gatewood Fence & Gate Is Watauga’s Preferred Gate Access Control Company
We work Watauga weekly. Most of our access control jobs here start the same way: a homeowner calls because a keypad or card reader stopped aligning with the latch, and nine times out of ten it’s not the electronics. Watauga’s Blackland Prairie clay has spent four decades heaving the original concrete post collars out of grade. When the hinge-side post rises, the gate drifts, the strike plate moves, and the smart hardware looks broken. It isn’t. We fix what’s actually wrong instead of selling you a new control board you didn’t need.
Our customers in Watauga tell us the same thing: they called a national outfit first, got a quote over the phone, then watched the price change when the truck arrived. We don’t do that. Upfront pricing is the promise. Hal Gatewood has been owner-operated since 2001, and every job carries the 90-Day Done Right Promise in writing. If something isn’t right after we leave, one call brings us back. No runaround.
And when you call (877) 610-2993, a live person answers. Twenty-four hours a day, seven days a week. Not a queue. Not a call center three states away. You get a person who knows Watauga, because our crew serves this city locally.
Our Gate Access Control Services in Watauga
Keypad Entry
We install and repair keypad entry systems on gates all over Watauga, from the cul-de-sac blocks off Watauga Road to the streets off Starnes Road. A new keypad in Watauga runs $280 to $480 installed, depending on whether we’re adding it to existing wiring or running new low-voltage cable. The big issue here is post heave: when a 1978 concrete collar lifts the hinge post two inches out of the clay, the keypad’s strike alignment shifts and codes fail intermittently. We re-set the post first, then mount the keypad. That’s why our installations hold up.
Phone Entry
Phone entry systems work well for Watauga’s shared driveways and rights of way. We install a cellular-connected control unit that calls your phone when someone presses the call button at the gate, then lets you open it with a keypress. Pricing in Watauga runs $550 to $950 for a standard residential system. For homeowners with a gate on a narrow side yard or a shared access lane, phone entry avoids handing out keypad codes that get shared and forgotten.
Card Reader
Card readers are common in Watauga where a gate serves multiple homes on a shared driveway, or where you want the convenience of a proximity fob without punching a code. A typical card reader install runs $320 to $560, and it works with most existing operators or as a full Gate Access Control setup. We can often reuse your existing wiring, which matters on older Watauga properties where trenching new lines through 40-year-old landscaping is something you’d rather avoid.
Video Intercom
Video intercom lets you see who’s at the gate from your phone before you open it. For Watauga’s ranch-style streets and cul-de-sacs, it’s a practical upgrade, especially where a gate sits far from the front door. Expect to pay $700 to $1,150 depending on camera quality and app features. We hardwire these systems where possible. In Watauga’s clay, anything wireless that can be affected by shifting gates and pinched cables is a system we’d rather harden.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Watauga
We service and install equipment from FAAC, BFT, Linear, Viking, and the other major access control manufacturers. If you already have a LiftMaster or Mighty Mule control board on an older Watauga gate, we can usually match your existing keypad or card reader without swapping the whole system. We carry common parts on our trucks for faster turnaround, and we’re certified on nine major gate brands. When you call about a dead keypad on a Saturday, the person who answers has likely fixed that exact board that week.
Common Gate Access Control Problems We See in Watauga Homes
- Post-collar heave breaks keypad alignment. The original 1970s concrete collars around hinge-side posts have often lifted completely out of grade. When that post rises even an inch, your gate swings open freely but the latch won’t catch, and the keypad or card reader reads as faulty when it isn’t.
- Summer drought shifts operator sensors. After 100°F-plus stretches, the clay shrinks and posts settle. Self-closing mechanisms and safety sensors fall out of adjustment, and smart access systems fault out repeatedly. We see this every July and August in Watauga’s 76148 zip.
- Sliding gates bind in tight rights of way. Watauga lots are small, and many slide gates run in narrow side yards. When a footing shifts, the rack and pinion binds and trips the operator’s entrapment protection. The motor isn’t failing. The ground under it moved.
- Ice storm damage to aging hardware. The February 2021 event hit this corridor hard. We still find wood rails that fractured during that freeze and hinges that seized from the stress, making it hard for any new access control hardware to work until the structural gate is repaired.
Pricing for Gate Access Control in Watauga, TX
Here’s what Watauga homeowners should expect to pay. Keypad entry systems run $280 to $480 installed. Card reader systems run $320 to $560. Phone entry runs $550 to $950. Video intercom runs $700 to $1,150. If your gate’s post needs re-setting before hardware will align, that’s additional but quoted upfront, and we’ll write it all down before any work starts. Your final price is agreed before we begin, not after we’re done. We also offer $40 off any repair over $200, no trip charge inside Tarrant County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. This page is about Gate Access Control in Watauga, and we quote honestly.
We Also Serve Cities Near Watauga
Our crews cover Watauga and the neighboring Tarrant County communities, including North Richland Hills, Richland Hills, Haltom City, and Hurst. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, and the crew that comes out to your street is local to this area. If you’re in any of these nearby cities, you’ll get the same Watauga pricing and the same live person on the phone.
Serving Watauga, TX - Our Local Coverage Area
We’re based in the Watauga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Watauga
Because Blackland Prairie clay expands when wet and lifts the hinge-side post collar, pushing your gate out of square so the latch misses the strike. It’s a footing problem, not a latch problem, and in Watauga it’s the most common access control issue we fix. The post must be re-set before any keypad, card reader, or latch hardware will hold alignment. Call (877) 610-2993 and we’ll come look at it.
We work on one side of the gate and keep the travel path clear, often installing the control unit on a post that can be accessed without closing the driveway. On a tight cul-de-sac off Watauga Road, we reset a leaning hinge post that had lifted its original 1978 concrete collar two inches out of the clay, squared the gate frame, and installed a new LiftMaster slide gate operator with safety photocell and keypad entry, keeping the shared driveway open while we worked. Your driveway stays usable because we plan the job around your traffic, not ours.
Yes, and it’s common in Watauga where lots are small and side yards are narrow. We’ll measure the available run, check the footing depth, and quote a slide gate conversion that fits your right of way. The operator and track get bedded properly so the shifting clay doesn’t bind the rack later. Expect a free measure and a written price before anything gets ordered.
Summer drought shrinks the clay and drops the posts, which misaligns the safety sensors and trips the operator’s entrapment protection. The motor reverses because it sees an obstacle that isn’t there. We fix the alignment and re-bed the post if needed, then the operator runs smooth again. Don’t keep resetting the breaker; that stresses the board.
Yes. We service LiftMaster, Ghost Controls, FAAC, BFT, Linear, Viking, and the other major brands, and we regularly install new keypads on gates that date to the late 1970s. The gate’s age is not the problem. The footing under it usually is. We fix that first, then mount the hardware. Call (877) 610-2993 for an exact quote, and the estimate is free.
Call Gatewood Fence & Gate for Gate Access Control in Watauga
When your Watauga gate won’t latch, your keypad codes fail, or you want phone entry on a shared driveway, call (877) 610-2993. You’ll talk to a live person, we’ll come out within a day or two, and we’ll quote the price before we touch anything. Hal Gatewood’s name is on the shop and the invoice. The work carries the 90-Day Done Right Promise, and we don’t hide behind fine print. If your gate is giving you trouble in Watauga’s clay, we’ll tell you what’s really wrong and fix it right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Watauga since the shop opened its doors in 2001.