Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Marina del Rey, CA
Gate repair in Marina del Rey usually costs between $180 and $900 depending on the job, with most hinge and alignment repairs landing in the $180-$340 range and full motor replacements running $1,200-$2,800. The work here is different from anywhere else in Los Angeles because the harbor air loads every hinge, operator, and steel post with salt continuously, and most of the gates we fix belong to large condo and apartment complexes where one failure locks out hundreds of residents. Call (877) 610-2993 and a live person answers, not a recording.
Why Marina del Rey Homes Are Different
Marina del Rey sits directly alongside the largest man-made small craft harbor in the United States, which means every gate here lives inside a salt-laden marine layer that drifts off the water most mornings. Hinges that would last twenty years in Westwood seize in eight here. Steel frames pit at the bottom rail where irrigation overspray meets harbor air, and gate motors corrode internally behind control boards that still look fine from the outside. We spec stainless or marine-grade hardware on any component within sight of the water, not as an upsell but because it is the only thing that keeps a gate swinging a year from now.
The second factor is the housing stock itself. Marina del Rey was developed almost entirely as a county-master-planned project in the 1960s and 1970s, and the result is a community of large apartment towers and condominium complexes rather than single-family homes. Automated vehicle gates are nearly universal on these properties, and many still run original or first-generation-replacement operators wired into aging intercom systems. A failed slide gate on a 200-unit building off Via Marina or Bali Way is not a homeowner’s inconvenience; it is a building-wide lockout that triggers a property-management work order before anyone touches a wrench.
Gate Repair in Marina del Rey
Gate repair in Marina del Rey starts with the same question every time: what has the salt air already eaten, and what is about to fail next. Most of the repair calls we run here are on automated vehicle gates at multi-family complexes along Admiralty Way, Via Marina, and the Bali Way apartment towers. A sagging gate here is almost never a broken weld in the middle of the frame. It is a hinge post that has been rusting from the inside out in sandy, brackish soil for forty years. We fix the gate in your driveway, weld on site, and repair what is actually failing rather than hauling the gate off or swapping parts that do not need swapping. Our Gate Repair work carries the 90-Day Done Right Promise in writing.
Sag and Alignment Repair
A gate that drags on the pavement in Marina del Rey is usually a combination of worn hinge pins and a post that has shifted in the sandy soil. We align the gate, re-hang it on fresh hardware, and weld the hinge points so the fix holds. Hinge replacement with on-site welding runs $180 to $340 per hinge depending on gate weight and post condition.
Hinge and Post Repair
Steel posts set in Marina del Rey’s coastal soil rust from the below-grade section upward, and the concrete base often hides paper-thin steel until the gate starts binding. We dig out the old post, set a new one in a proper concrete footer, and weld the gate back into alignment. Post replacement typically runs $450 to $900 per post including concrete, hardware, and finish, and it is the most common repair we do on older complex gates near the water.
Frame and Rail Repair
Bottom rails on Marina del Rey gates rot from standing water and salt spray, and the welds where rails meet uprights crack from years of torque on automated slide gates. We straighten and re-weld rails on site, and when a rail is beyond saving we fabricate a replacement section to match. A typical rail repair runs $150 to $400, and we will tell you honestly which route makes sense before we start.
How much does gate repair cost in Marina del Rey?
Most gate repairs in Marina del Rey fall between $180 and $900. Hinge replacement runs $180-$340 per hinge, post replacement $450-$900, and rail repair $150-$400. Call (877) 610-2993 for a free estimate; the price we quote is the price you pay.
Can you come today if our vehicle gate won’t open?
Yes. We respond same-day for urgent gate failures in Marina del Rey, and we answer the phone with a live person 24/7. Call (877) 610-2993 and we will get your gate moving.
Gate Installation in Marina del Rey
A new gate installation in Marina del Rey typically runs $1,800 to $6,500 for a standard driveway or pedestrian gate, depending on whether you are replacing an aging vehicle-access gate on a condo complex or adding a private gate to a rare single-family lot. Most jobs in the 90292 and 90295 zip codes take one to three days once materials are ordered and the old hardware is out. We build for the salt air from day one because a gate installed with inland-spec hardware will be rusty here in two years. Our Gate Installation team handles everything from demolition to final safety check.
Driveway Gate Installation
Driveway gates in Marina del Rey are usually attached to multi-family properties or the occasional private home near the water. A typical sliding driveway gate install runs $2,200 to $5,800 including the operator. We spec marine-grade fasteners on every install near the harbor because zinc die-cast hardware seizes years early in this air.
Pedestrian Gate Installation
Pedestrian gates at Marina del Rey condo and apartment buildings take a daily beating from hundreds of residents, delivery people, and guests. We install walk gates with heavy-duty hinges and closures that survive that cycle count. These jobs typically run $1,800 to $4,200.
Sliding Gate Installation
Sliding gates are the standard for automated vehicle access at Marina del Rey’s larger complexes because they save space and handle high traffic. The track and rollers have to be specced for a salt-water environment or they will bind within a season. Most sliding gate installations in Marina del Rey run $3,000 to $6,500.
How fast can you install a gate in Marina del Rey?
Most gate installations in Marina del Rey are completed within one to three days once materials are ordered and the old hardware is out. Installation is measured, ordered, and scheduled so it is done right. Call (877) 610-2993 for a free measure and written price.
What warranty do you offer on gate installations in Marina del Rey?
Every gate installation we complete carries the 90-Day Done Right Promise in writing. If it is not done right, we make it right, no runaround. That is on top of the manufacturer’s warranty on the gate and operator.
Gate Motor & Opener in Marina del Rey
Gate motor repair in Marina del Rey usually runs $180-$420 for a standard slide or swing operator service call, and full motor replacements on HOA properties are typically approved and scheduled within 48 to 72 hours. The salt air here corrodes motor windings and housings from the inside, which is why we see so many FAAC and BFT operators with fried control boards that still look fine from the outside. We repair first and replace only what is actually dead, and we know the HOA approval chain matters as much as the repair itself. Our Gate Motor & Opener work covers nine major brands, including LiftMaster, FAAC, BFT, Linear, and Viking.
Motor Repair
Most motor repairs in Marina del Rey run $180-$420 for board replacements, limit switch adjustments, capacitor swaps, and corrosion cleanup. Hal gets visibly annoyed at sloppy work left behind by companies that swapped a whole operator when a $40 limit switch was the actual fault. On a 1970s building off Mindanao Way, that philosophy routinely saves boards thousands.
Motor Installation
Gate motor installation in Marina del Rey typically runs $1,200-$2,800 depending on operator type, gate weight, and whether the existing intercom wiring can be reused. On HOA properties we quote the full scope in writing before any work starts, and that price is the price. A motor within sightline of the harbor basin should not get the same zinc die-cast housing you would install inland.
Linear Motor
Linear operators are common on the long slide gates at Marina del Rey’s larger complexes, and they suffer hard in this climate. Internal motor windings corrode, the rack and pinion pits, and the gate starts failing intermittently on damp harbor mornings. Linear motor repair here runs $310-$650 for component-level work and limit recalibration.
Why do gate motors fail so fast near the harbor in Marina del Rey?
Marina del Rey’s open exposure to onshore Pacific flow means salt-laden air reaches every operator housing continuously. Internal windings and zinc die-cast housings degrade noticeably faster here than a few miles inland. We spec marine-grade hardware for any component within sight of the water.
Can a battery backup keep our Marina del Rey gate operating during a coastal power outage?
Yes, and for Marina del Rey properties it is a prudent install. Coastal outages happen during storm surges, and a gate that loses power stays closed. A properly sized battery backup keeps the operator running through short outages and meets UL 325 entrapment-protection requirements. Battery backup installation runs $350-$900.
Gate Access Control in Marina del Rey
When a vehicle gate stops reading keypads at a 200-unit building off Admiralty Way, it is not a minor inconvenience. It is a line of cars stacking up behind the barrier and a property manager getting calls from every resident with somewhere to be. Gate access control in Marina del Rey has to work in salt air that chews through circuit boards faster than anywhere in Los Angeles County, and the older the building, the more likely the wiring itself is part of the problem. Our Gate Access Control work handles keypads, remotes, phone entry, card readers, and video intercom, and we still service the older systems nobody else wants to touch.
Keypad Entry Systems
A keypad that stops accepting codes on a building off Fiji Way is usually the first casualty of salt-air corrosion eating the backside of the membrane. We replace keypads with sealed, marine-rated units rather than putting the same vulnerable indoor hardware back on an outdoor pedestal. A standard keypad replacement here runs $185 to $420 depending on whether existing wiring can be reused.
Phone Entry and Call-Box Systems
The classic Marina del Rey call box is a weathered metal housing with a telephone-style keypad wired into the building’s original intercom loop. These systems are aging out, and the most common failure we see is a corroded relay or a damaged surge protector after a winter storm rolls in off the Pacific. Phone entry repair in Marina del Rey typically runs $220 to $550.
Video Intercom and Smart Access
Newer video intercom installs in Marina del Rey often mean adding wireless or app-based access to a building that still runs a 1980s hardwired telephone entry system. We handle hybrid approaches: keep what works, replace what is failing, and integrate smart access where residents actually want it. Video intercom and smart access upgrades run $800 to $2,400 depending on unit count and cable condition.
Is gate access control more expensive in Marina del Rey than nearby cities?
Marina del Rey pricing runs about 5 to 15 percent higher than inland cities like Hawthorne or Lawndale for access-control work. The reason is environmental: salt-air corrosion means more parts get replaced rather than repaired. Our labor rates do not change by city, and the written quote is the price you pay.
Do you handle emergency gate access failures outside of business hours?
We do. A live person answers our phone 24/7 in Marina del Rey, including weekends and the middle of the night. When a keypad fails at 2 a.m. and a resident cannot get through the gate, that is the call we answer. Emergency access-control repair carries the same 90-Day Done Right Promise in writing.
Gate Parts & Welding in Marina del Rey
Most gate failures in Marina del Rey come down to one thing: the wrong metal for the wrong air. We replace hinges, rebuild posts, repair rails, and weld on site so your gate stays in your driveway, not in the back of a truck. Hal has been fixing gates since 2001, and the person who picks up the phone at (877) 610-2993 works for a company with a published address, a real license number, and a 90-day promise in writing. Our Gate Parts & Welding work is repair-first because a gate sagging in the hinge post does not need a new frame; it needs the post fixed.
Hinge Replacement
In Marina del Rey, a gate hinge that has been breathing ocean mist for ten years looks like a barnacle-encrusted ship fitting. The zinc plating goes first, then the pin seizes, and the gate starts dragging. We cut the old hinges off, grind the post clean, and weld on new ones specced for marine air. A standard hinge replacement with on-site welding runs $180 to $340 per hinge.
Post Replacement
Steel posts set in Marina del Rey’s sandy, salty soil rust from the inside out. The concrete may look fine at the surface, but the post below grade is often paper-thin after 40 years of brackish ground moisture. We dig out the old post, set a new one with a proper concrete footer, and weld the gate back into alignment. Post replacement typically runs $450 to $900 per post including concrete, hardware, and finish.
Custom Welding
Not every gate part comes off a shelf. Some of the old Marina del Rey access gates were built with custom steel work that no longer exists, and the answer is to fabricate it in the driveway. Hal welds aluminum and steel on site, from cracked frames to custom latch receivers to reinforcement plates. Custom welding runs $95 to $250 per hour, and small fabrication jobs usually land between $150 and $350.
Can you weld a gate on site in Marina del Rey, or does it have to be hauled off?
We weld on site. Your gate stays in your driveway, and we bring the welding rig to you. That applies to hinge replacement, rail repair, post work, and custom fabrication. Call (877) 610-2993 for a free estimate.
Do you recommend stainless hardware for every Marina del Rey gate?
For any component within direct sight of the water, yes. Stainless or marine-grade fasteners cost more up front but outlast zinc-plated hardware several times over in this air. We will tell you honestly where stainless matters and where standard hardware is fine.
Brands We Service in Marina del Rey
We service and repair FAAC, BFT, Linear, and Viking operators throughout Marina del Rey, along with LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. We stock common parts locally for faster turnaround on slide and swing motor failures. See our brands for the full list of what we work on.
Pricing for Gate Repair in Marina del Rey, CA
| Service | Typical range in Marina del Rey |
|---|---|
| Gate alignment / sag repair | $180 - $340 |
| Hinge replacement (weld-on) | $180 - $340 per hinge |
| Post replacement | $450 - $900 per post |
| Rail repair | $150 - $400 |
| Motor/opener repair | $180 - $420 |
| Linear motor repair | $310 - $650 |
| Motor/opener replacement | $1,200 - $2,800 |
| Keypad replacement | $185 - $420 |
| Phone entry repair | $220 - $550 |
| Card reader replacement | $260 - $610 per reader |
| Video intercom / smart access upgrade | $800 - $2,400 |
| Custom welding | $95 - $250 per hour |
What pushes prices up in Marina del Rey is corrosion that has already worked into existing wiring and posts, which means more replacement parts and more labor than an inland job. Every job is quoted and agreed in writing before any work starts, and that number is the number on the invoice.
Neighborhoods We Serve in Marina del Rey
We run calls up and down this harbor every week. The large complexes along Admiralty Way, Via Marina, and Bali Way are our most frequent stops, along with the condominium buildings off Mindanao Way and Tahiti Way. Same-day response is typical for urgent gate failures anywhere in the 90292 and 90295 zip codes.
- Admiralty Way corridor
- Via Marina and Marina City Club
- Bali Way apartment towers
- Mindanao Way communities
- Tahiti Way condominiums
Service Area - Cities Near Marina del Rey
Our service area extends beyond Marina del Rey into the surrounding South Bay and Westside communities. We handle gate repair in Lawndale, CA, Hermosa Beach, CA, Redondo Beach, CA, Hawthorne, CA, and Del Aire, CA. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Marina del Rey locally.
Serving Marina del Rey, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Marina del Rey and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Marina del Rey coverage area; if your address is on it, we can help.
Also serving nearby: Marina del Rey, CA, Lawndale, CA, Hermosa Beach, CA, Redondo Beach, CA, Hawthorne, CA, Del Aire, CA.
FAQs About Gate Repair in Marina del Rey
Yes, on nearly every Marina del Rey property. Most automatic gates here sit on large multi-family parcels governed by an HOA board and a management company. You will need written board approval before a motor replacement, and many management companies route the work through their emergency work order process. We help boards and managers prepare the scope so the approval moves quickly.
Ask whether the operator still meets current UL 325 standards, whether the safety photocells and reversing edges are tested and documented, and whether the loop detector calibration is current. On older Marina del Rey gates, original detectors have often drifted out of spec, which is both a safety hazard and an HOA liability exposure. We can answer those questions on site.
Yes. We cover the 90292 and 90295 zip codes and work regularly in the large multi-family complexes along Admiralty Way, Washington Boulevard, Via Marina, Fiji Way, and throughout the planned marina community. Most of our Marina del Rey work is in apartment towers and condominium buildings with automated vehicle gates.
Call (877) 610-2993 for a free estimate. A live person answers, the price is quoted and agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marina del Rey Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg